Phoenix Contact QUINT4-PS/24DC/24DC/5/PT QUINT4-PS/24DC/24DC/5/PT DC/DC Converter

Model number
QUINT4-PS/24DC/24DC/5/PT

Primary-switched DC/DC converter, QUINT POWER DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 24 V DC, output: 24 V DC / 5 A

Price and availability on request

We reply by email or phone, Monday to Saturday, 10:30 am to 6:30 pm.

Several models? Add each to your enquiry list and send them as one enquiry.

Request a quote

Sent with the product details: Phoenix Contact QUINT4-PS/24DC/24DC/5/PT QUINT4-PS/24DC/24DC/5/PT DC/DC Converter.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Output 24 V DC, 5 A (120 W)
  • Input 24 V DC
  • Efficiency typ. 92.2 % (24 V DC)
  • Width 36 mm
  • Operating temperature -25 °C ... 70 °C (> 60 °C Derating - 2,5 %/K)
  • Degree of protection IP20

Specifications

Input data
Nominal input voltage range24 V DC
Input voltage range24 V DC -25 % ... +40 %
Wide-range inputno
Electric strength, max.35 V DC (60 s)
Inrush currenttyp. 1 A
Inrush current integral (I2t)< 0.05 A2s
Inrush current limitation1 A
Mains buffering timetyp. 14 ms (24 V DC)
Current consumption6.9 A (24 V DC)
Nominal power consumption130 VA
Typical response time300 ms (from SLEEP MODE)
Switch-on time< 1 s
Input fuse15 A (slow-blow, internal)
Recommended breaker for input protection10 A ... 16 A (Characteristic B, C, D, K or comparable)
Output data
Efficiencytyp. 92.2 % (24 V DC)
Output characteristicU/I Advanced; Smart HICCUP; FUSE MODE
Nominal output voltage24 V DC
Setting range of the output voltage (USet)24 V DC ... 29.5 V DC (> 24 V DC, constant capacity)
Nominal output current (IN)5 A
Static Boost (IStat.Boost)6.25 A
Dynamic Boost (IDyn.Boost)10 A (5 s)
Selective Fuse Breaking (ISFB)30 A (15 ms)
Magnetic circuit breaker trippingA1 ... A4 / B2 / C1 ... C2 / Z1 ... Z4
Short-circuit-proofyes
No-load proofyes
Output power (PN)120 W
Output power (PStat. Boost)150 W
Output power (PDyn. Boost)240 W (5 s)
Feedback voltage resistance≤ 35 V DC
Protection against overvoltage at the output (OVP)≤ 32 V DC
Residual ripple< 10 mVPP
Control deviation static< 1 % (change in load, static 10 % ... 90 %)
Control deviation dynamic< 1 % (change in load, static 10 % ... 90 %)
Control deviation Input voltage change< 1 % (change in load, static 10 % ... 90 %)
Rise time< 100 ms (UOUT (10 % ... 90 %))
Connection in seriesyes
Maximum no-load power dissipation< 2 W
Power loss nominal load max.< 10 W
Power dissipation SLEEP MODE< 1 W
Connection in parallelyes, for redundancy and increased capacity
Fuse protection (secondary side)electronic; thermal-magnetic; thermal
Connection data - Input
Position1.x
Connection data - Conductor connection
Connection methodPush-in connection
rigid0.2 mm² ... 6 mm²; 0.2 mm² ... 1 mm²
flexible0.2 mm² ... 6 mm²; 0.2 mm² ... 1.5 mm²
flexible with ferrule without plastic sleeve0.2 mm² ... 4 mm²; 0.2 mm² ... 1.5 mm²
flexible with ferrule with plastic sleeve0.2 mm² ... 4 mm²; 0.2 mm² ... 0.75 mm²
rigid (AWG)24 ... 10; 24 ... 16
Stripping length10 mm; 8 mm
Connection data - Output
Position2.x
Connection data - Signal
Position3.x
Signaling - LED signaling
Types of signalingLED; Floating signal contact; Active signal output Out1 (digital, configurable); Active signal output Out2 (analog, configurable); Remote contact; Signal ground SGnd
Signal threshold> 100 % (LED lights up yellow, output power > 120 W); > 75 % (LED lights up green, output power > 90 W); > 50 % (LED lights up green, output power > 60 W); > 0.9 x USet (LED lights up green); < 0.9 x USet (LED flashes green); > 0.8 x UInNom (LED off); < 0.8 x UInNom (LED lights up yellow)
Signaling - Signal input Remote (configurable)
Connection labeling3.3 +
FunctionOutput power ON/OFF (remote)
DefaultOutput power ON (>40 kΩ/24 V DC/open bridge between REM and SGnd)
Signaling - Signal output Out 1 (configurable)
Connection labeling3.5 +
Digital0 V DC; 24 V DC; 20 mA
DefaultUIN input voltage OK
Signal optionOutput voltage; Output current; Output power; Operating hours; Early warning of high temperatures; OVP voltage limitation active
Signaling - Signal output Out 2 (configurable)
Connection labeling3.6 +
Digital0 V DC; 24 V DC; 20 mA
DefaultOutput power
Signal optionOutput voltage; Output current; Operating hours; Early warning of high temperatures; OVP voltage limitation active; Output voltage; Output current; Output power
Analog4 mA ... 20 mA ±5 % (Load ≤400 Ω)
Signaling - Signal output Relay 13/14 (configurable)
Connection labeling3.1, 3.2
Switch contact (floating)floating
Digital24 V DC; 1 A; 30 V AC; 0.5 A
DefaultOutput voltage
Signal optionOutput current; Output power; Operating hours; Early warning of high temperatures; OVP voltage limitation active; UIN input voltage OK
Signaling - Signal ground SGnd
Connection labeling3.4 +
FunctionSignal ground
Reference potentialfor OUT1, OUT2, REM
Electrical properties
Number of phases1.00
Insulation voltage input/output4 kV DC (type test); 2 kV DC (routine test)
Switching frequency190.00 kHz ... 220.00 kHz (Auxiliary converter stage); 50.00 kHz ... 420.00 kHz (Main converter stage)
Product properties
Product typeDC/DC converters
Product familyQUINT POWER
MTBF (IEC 61709, SN 29500)> 1600000 h (25 °C); > 930000 h (40 °C); > 380000 h (60 °C)
Product properties - Insulation characteristics
Protection classSpecial with SELV input and output
Overvoltage category (EN 61010-1)II (≤ 5000 m)
Overvoltage category (EN 62477-1)III (≤ 5000 m)
Degree of pollution2
Dimensions - Item dimensions
Width36 mm
Height130 mm
Depth125 mm
Dimensions - Item dimensions with alternative mounting
Width122 mm
Height130 mm
Depth39 mm
Dimensions - Installation dimensions
Installation distance right/left (active)15 mm / 15 mm (≤ 70 °C)
Installation distance right/left (passive)0 mm / 0 mm (≤ 70 °C)
Installation distance top/bottom (active)50 mm / 50 mm (≤ 70 °C)
Installation distance top/bottom (passive)50 mm / 50 mm (≤ 70 °C)
Mounting
Mounting typeDIN rail mounting
Assembly notealignable - PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable - PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
With protective coatingno
Material specifications
Flammability rating according to UL 94 (housing / terminal blocks)V0
Housing materialMetal
Hood versionStainless steel X6Cr17
Side element versionAluminum
Environmental and real-life conditions - Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C Derating - 2,5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Ambient temperature (start-up type tested)-40 °C
Maximum altitude≤ 5000 m (> 2000 m, observe derating)
Climatic class3K22 (in accordance with EN 60721-3-3)
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Shock18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)5 Hz ... 100 Hz, 2.3g (in accordance with DNV Class A and C); 5 Hz ... 100 Hz, 4.0g (in accordance with DNV Class B), only with UWA 130 mounting adapter
Temp codeT4 (-25 ... +70 °C; > 60 °C, Derating - 2,5 %/K)
Standards and regulations - Safety for measurement, control, and laboratory equi
Standard designationElectrical safety (of control and regulation devices)
Standards/specificationsIEC 61010-1
Standards and regulations - Protective extra-low voltage
Standard designationProtective extra-low voltage
Standards/specificationsEN 61010-1 (SELV); IEC 61010-2-201 (PELV)
Standards and regulations - Mains voltage dips
Standard designationMains variation/undervoltage
Standards/specificationsEN 61000-4-29
Standards and regulations - Railway applications
Standard designationRailway applications
Standards/specificationsEN 50121-3-2; IEC 62236-3-2
Approvals - UL
IdentificationUL Listed UL 61010-1; UL Listed UL 61010-2-201; UL 121201 & CSA C22.2 No. 213-17 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)
Approvals - CSA
IdentificationCAN/CSA-C22.2 No. 61010-1-12; CAN/CSA C22.2 No. 61010-2-201-18
Approvals - SIQ
IdentificationType tested (type approved); CB scheme (IEC 61010-1, IEC 61010-2-201)
Approvals - Shipbuilding
IdentificationDNV; ABS; BV; NK; LR

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering. Brand names, logos and model names are trademarks of their respective owners, used only to identify the product. Details

Model numbers in this series (1)

Send us the complete code you need and we will quote it.

  • 2910119

About the QUINT4-PS/24DC/24DC/5/PT

QUINT POWER power supply for DIN-rail mounting with maximum functionality. Primary-switched DC/DC converter, QUINT POWER DIN rail mounting, SFB Technology (Selective Fuse Breaking), input: 24 V DC, output: 24 V DC / 5 A Order no. 2910119.