Phoenix Contact QUINT-PS/96-110DC/24DC/10 QUINT-PS/96-110DC/24DC/10 DC/DC Converter

Model number
QUINT-PS/96-110DC/24DC/10

Primary-switched QUINT DC/DC converter with wide range input for DIN rail mounting with SFB (selective fuse breaking) technology, input: 96 - 110 V DC, output: 24 V DC/10 A

Price and availability on request

We reply by email or phone, Monday to Saturday, 10:30 am to 6:30 pm.

Several models? Add each to your enquiry list and send them as one enquiry.

Request a quote

Sent with the product details: Phoenix Contact QUINT-PS/96-110DC/24DC/10 QUINT-PS/96-110DC/24DC/10 DC/DC Converter.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Output 24 V DC ±1 %, 10 A (-40 °C ... 60 °C)
  • Input 96 V DC ... 110 V DC
  • Efficiency > 92 % (UIN 96 V DC / UOUT 24 V DC)
  • Width 48 mm
  • Operating temperature -25 °C ... 70 °C (> 60 °C Derating - 2,5 %/K)
  • Degree of protection IP20

Specifications

Input data - DC operation
Nominal input voltage range96 V DC ... 110 V DC
Input voltage range67.2 V DC ... 154 V DC
Wide-range inputyes
Input voltage range DC67.2 V DC ... 154 V DC
Voltage type of supply voltageDC
Inrush current< 10 A (typical)
Inrush current integral (I2t)0.37 A2s
Mains buffering timetyp. 10 ms (96 V DC)
Current consumption3.5 A (96 V DC); 3.1 A (110 V DC)
Reverse polarity protection, ≤ 154 V DC
Nominal power consumption264 VA
Protective circuitTransient surge protection; Varistor
Input fuse10 A 150 V DC (internal (device protection))
Output data
Efficiency> 92 % (UIN 96 V DC / UOUT 24 V DC); > 92 % (UIN 110 V DC / UOUT 24 V DC)
Output characteristicU/I
Nominal output voltage24 V DC ±1 %
Setting range of the output voltage (USet)18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN)10 A (-40 °C ... 60 °C)
POWER BOOST (IBoost)12.5 A (-40 °C ... 40 °C permanent, UOUT = 24 V DC)
Selective Fuse Breaking (ISFB)60 A (12 ms)
Magnetic circuit breaker trippingB2 / B4 / B6
Derating60 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance35 V DC
Protection against overvoltage at the output (OVP)< 35 V DC
Max. capacitive loadunlimited
Active current limitation18 A
Control deviation< 1 % (change in load, static 10 % ... 90 %); < 2 % (change in load, dynamic 10 % ... 90 %); < 0.1 % (change in input voltage ±10 %)
Residual ripple< 20 mVPP
Output power240 W
Peak switching voltages nominal load< 10 mVPP (20 MHz)
Maximum no-load power dissipation4 W (UIN 110 V DC)
Power loss nominal load max.22 W (UIN 110 V DC)
Rise time< 2 ms (UOUT (10 % ... 90 %))
Connection in parallelyes, for redundancy and increased capacity
Connection in seriesyes
Fuse protection (secondary side)electronic; thermal-magnetic; thermal
Output data - Signal - DC OK active
Output descriptionUOUT > 0.9 x UN - High signal
Switching voltage range18 V DC ... 24 V DC
Maximum inrush current< 20 mA (short-circuit-proof)
Output data - Signal - POWER BOOST, active
Output descriptionIOUT < IN - High signal
Switching voltage range18 V DC ... 24 V DC
Maximum inrush current< 20 mA (short-circuit-proof)
Output data - Signal - UIN OK, active
Output descriptionUIN > 19.2 V - High signal
Switching voltage range18 V DC ... 24 V DC
Maximum inrush current≤ 20 mA (short-circuit-proof)
Output data - Signal - DC OK floating
Output descriptionRelay
Connection data - Input
Connection methodScrew connection
Conductor cross-section, rigid min.0.2 mm²
Conductor cross-section, rigid max.2.5 mm²
Conductor cross-section flexible min.0.2 mm²
Conductor cross-section flexible max.2.5 mm²
Conductor cross-section AWG min.24
Conductor cross-section AWG max.12
Stripping length8 mm
Screw threadM3
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Connection data - Output
Connection methodScrew connection
Conductor cross-section, rigid min.0.2 mm²
Conductor cross-section, rigid max.2.5 mm²
Conductor cross-section flexible min.0.2 mm²
Conductor cross-section flexible max.2.5 mm²
Conductor cross-section AWG min.24
Conductor cross-section AWG max.12
Stripping length7 mm
Screw threadM3
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Connection data - Signal
Conductor cross-section, rigid min.0.2 mm²
Conductor cross-section, rigid max.2.5 mm²
Conductor cross-section flexible min.0.2 mm²
Conductor cross-section flexible max.2.5 mm²
Conductor cross-section AWG min.24
Conductor cross-section AWG max.12
Screw threadM3
Tightening torque, min0.5 Nm
Tightening torque max0.6 Nm
Signaling
Types of signalingLED; Active switching output; Relay contact
Signaling - Signal output - DC OK active
Status display"DC OK" LED green
Colorgreen
Signaling - Signal output - POWER BOOST, active
Status display"BOOST" LED yellow/IOUT > IN - LED on
Coloryellow
Note on status displayLED on
Signaling - Signal output - UIN OK, active
Status displayLED "UIN < 0.8 x UN V" yellow/UIN < 0.8 x UN V DC - LED on
Coloryellow
Note on status displayLED on
Electrical properties
Number of phases1
Insulation voltage input/output1.5 kV (type test); 1 kV (routine test); 1 kV (type test)
Product properties
Product typeDC/DC converters
Product familyQUINT POWER
MTBF (IEC 61709, SN 29500)> 1357000 h (25 °C); > 772000 h (40 °C)
Product properties - Insulation characteristics
Protection classI
Degree of pollution2
Dimensions
Width48 mm
Height130 mm
Depth125 mm
Dimensions - Installation dimensions
Installation distance right/left0 mm / 0 mm (≤ 70 °C)
Installation distance right/left (active)15 mm / 15 mm (≤ 70 °C)
Installation distance top/bottom50 mm / 50 mm (≤ 70 °C)
Installation distance top/bottom (active)50 mm / 50 mm (≤ 70 °C)
Dimensions - Alternative assembly
Width122 mm
Height130 mm
Depth51 mm
Mounting
Mounting typeDIN rail - 35 mm
Assembly notealignable - PN ≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable - PN <50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom
Mounting positionhorizontal DIN rail NS 35, EN 60715
With protective coatingno
Material specifications
Housing materialMetal
Type of housingAluminum (AlMg3)
Hood versionGalvanized sheet steel, free from chrome (VI)
Environmental and real-life conditions - Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)-25 °C ... 70 °C (> 60 °C Derating - 2,5 %/K)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Ambient temperature (start-up type tested)-40 °C
Climatic class3K3 (in acc. with EN 60721)
Max. permissible relative humidity (operation)≤ 95 % (at 25 °C, non-condensing)
Shock18 ms, 30g, in each space direction (according to IEC 60068-2-27)
Vibration (operation)< 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6); 15 Hz ... 150 Hz, 2.3g, 90 min.
Temp codeT4 (-25 ... +70 °C; > 60 °C, Derating - 2,5 %/K)
Standards and regulations
Rail applicationsEN 50121-4
Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installationsEN 50178/VDE 0160 (PELV)
Standard - Electrical safetyEN 60950-1/VDE 0805 (SELV)
Standard – Safety extra-low voltageEN 60950-1 (SELV); EN 60204 (PELV)
Standard - Safe isolationDIN VDE 0100-410
Approvals
UL approvalsUL/C-UL listed UL 508; UL/C-UL Recognized UL 60950-1; UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D T4 (Hazardous Location)

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering. Brand names, logos and model names are trademarks of their respective owners, used only to identify the product. Details

Model numbers in this series (1)

Send us the complete code you need and we will quote it.

  • 2905010

About the QUINT-PS/96-110DC/24DC/10

QUINT POWER power supply for DIN-rail mounting with maximum functionality. Primary-switched QUINT DC/DC converter with wide range input for DIN rail mounting with SFB (selective fuse breaking) technology, input: 96 - 110 V DC, output: 24 V DC/10 A Order no. 2905010.