Masibus 5040 Auto-Tune PID Single Loop Controller
- Brand
- Masibus
- Model number
- 5040
- Category
- Temperature Controllers
Masibus 5040 auto-tune PID single loop controller: input Ranges, output 4-20 mA@500 Ω max.. For heat treatment furnaces, reheat furnaces.
Price and availability on request
Key features
- Universal Input selection
- Panel Mount
- Universal output including valve positioner output
- Autotune PID with Ratio control
- Fast Loop response time of 250mSec
- 4 Relay and 4 Digital outputs for Control, Alarms and events
- 4 Digital Inputs for remote operations
- 18 Alarm types
- Auto/Manual selection with bumpless transfer
- Auto-tune PID, On-Off or Motorised Valve control
- Analog outputs for control/retransmission
- RS485 port with Modbus RTU protocol
Specifications
| Input Type | Thermocouple (E, J, K, T, B, R, S, N) RTD (Pt100), current, voltage ; 4 to 20 mA, 0-20mA, 0-5V, 1-5V ; Potentiometer 100 to 2K Ohm |
|---|---|
| Input Range | Refer Table-1 |
| ADC Resolution | 17 bits |
| Display Resolution | 0.1°C / 1 count |
| Sampling Rate | 250 msec. ; 750 msec. |
| CJC Error | ±2.0 °C max. |
| Sensor Burnout Current | 0.25uA |
| RTD Excitation Current | 1mA max. |
| NMRR | > 40dB |
| CMRR | > 120dB |
| Temp-Co | < 100ppm/°C |
| Input Impedance | > 1MΩ ; 1 MΩ Input 3: ZV Input |
| Max Voltage | 20VDC Input 2: RSP Input |
| Input Type | 4, Potential free or open collector Rating 24VDC @ 5mA max. |
|---|
| Process Value | 0.56" Four-digit 7 segment red LED |
|---|---|
| Set Value | 0.4" Four-digit 7 segment green LED |
| Manipulated Val/ZV | 20 Segment orange LED |
| Status Indication | Four red LED's for relays, alarm, Auto/manual, set point selection, valve position feedback, green LEDs for communication |
| Keys | Menu, escape / A/M, shift, increment |
| Manual Offset in P Mode | ±50% of P band |
|---|---|
| Proportional Band | 0.1 to 999.9 |
| Integral Time | 0 to 1000 sec. |
| Derivative Time (Rate) | 0 to 250 sec. |
| Cycle Time | 1 to 250 sec. |
| Auto-Tuning | Yes |
| Hysteresis | 1 to 250 (on/off mode) |
| Relays | 1 or 2 (2 for forward/ reverse motor control type) |
|---|---|
| Type & Rating | 1 Change over (C, NO, NC), 5A @ 230V AC / 30V DC |
| Mode | PID or ON/OFF control (field selectable) |
| Rating | 11VDC @ 20mA |
|---|
| Output Signal | 4-20 mA@500 Ω max. |
|---|
| Number of Output | 1 (Field Programmable, selectable for PV, MV or ZV) |
|---|---|
| Output Signal | 0/4-20mA @ 500 ohm Max; 0/ 1-5VDC, 0-10 V DC @ 3 K ohms min. |
| Output Accuracy | ±0.25% of span |
| Relays | 3 or 4 (If control o/p is pulse / analog) 2 (if O/P is VPFB or VPNA) |
|---|---|
| Type & Rating | 1 Change over (C, NO, NC), 5A @ 230V AC / 30V DC |
| No & Type of Output | 4 Open collector o/p |
|---|---|
| Rating | 24 VDC @ 50mA |
| Interface | RS-485 (2 Wire) |
|---|---|
| Protocol | Modbus RTU |
| Baud Rate (bps) | 9600, 19200 |
| Transmitter Power Supply | 24VDC (±1V) @30mA |
| Standard | 85-265V AC/110-300VDC |
|---|---|
| Optional | 18-36VDC |
| Mounting Type | Panel |
|---|---|
| Dimension (in mm) | 96(H) x 96(W) x 110(D) |
| Panel Cut Out (in mm) | 92.5(H) x 92.5(W) |
| Weight | 500 grams |
| Enclosure Material | ABS plastic |
| Ingress Protection | IP20 (Except terminals) |
| Area Classification | Safe |
| Terminal Cable Size | 2.5mm² |
| Accessories | Two mounting clamps |
| Operating Temperature | 0 to 55°C |
|---|---|
| Storage Temperature | 0 to 80°C |
| Humidity | 20 to 95 %RH Non-condensing Table 1: Display Range |
| Input Type | Ranges |
| RTD | Pt-100 / -199.9 to 850.0°C |
| Applications | Heat treatment furnaces, Reheat furnaces, Ceramic Kilns, Glass Industry, Flow/ Pressure control, Water and waste water control, Ratio Control, Cascade Control, Pulp consistency, Paper Sheet Drying, Steam control |
|---|---|
| Industries | Paper, Valve Manufacturer, Metal |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Masibus 5002U-P
Masibus 5002U-P ON/OFF and Proportional Controller
Masibus 5002U-P ON/OFF and proportional controller: input Ranges, output ON/OFF or proportional. For heat treatment furnaces, reheat furnaces.
-
Enquire about Masibus 5006RN / LC5296H
Masibus 5006RN / LC5296H ON/OFF Controller
Masibus 5006RN / LC5296H ON/OFF controller: input Input Type / Range. For heat treatment furnaces, water heating boilers.
-
Enquire about Masibus LC5296-DC
Masibus LC5296-DC Dual Channel Indicator cum Controller
Masibus LC5296-DC dual channel indicator cum controller: input RTD (Pt100), Current, Voltage. For condition monitoring, heat treatment furnaces.
-
Enquire about Masibus LC5296-XP-DC
Masibus LC5296-XP-DC Flame Proof Dual Channel Indicator cum Controller
Masibus LC5296-XP-DC flame proof dual channel indicator cum controller: input RTD (Pt100), Current, Voltage, Serial. For temperature controlling in reactors, pressure controlling in reactors.
