Hioki RM3543-01 Resistance HiTester with GP-IB
- Brand
- Hioki
- Model number
- RM3543-01
- Category
- Resistance Meters
Resistance meter for shunts down to 0.1 mΩ: 0.01 μΩ resolution, ±0.16% accuracy, contact check, comparator and data export for automated systems; test fixtures sold separately. Built-in GP-IB interface.
Price and availability on request
Key features
- Advanced enough to measure 0.1 mΩ shunts with room to spare at ±0.16% accuracy & 0.01μΩ resolution performance
- Superb repeatable measurement accuracy
- Advanced contact-check, comparator, and data export functions
- Intuitive user interface and strong noise immunity are ideal for automated systems
Specifications
| Measurement method | Four-terminal, constant-current DC |
|---|---|
| Resistance range | 10 mΩ (Max. 12.00000 mΩ, 0.01 μΩ resolution) to 1000 Ω range (Max. 1200.000 Ω, 1 mΩ resolution), 7 steps |
| Display | Monochrome graphic LCD 240 × 64 dot, white LED backlight |
| Measurement accuracy | [at 10 mΩ range, with SLOW mode, average 16 times settings] ±0.060 % rdg. ±0.001 % f.s. |
| Testing current | [at 10 mΩ range] 1 A DC to [at 1000 Ω range] 1 mA DC |
| Open-terminal voltage | 20 V DC max. Note: Voltage when not measuring is 20 mV or less, with current mode set at PULSE and Contact Improver Setting set at OFF/PULSE (measured with a voltmeter having 10 MΩ) |
| Sampling rate | FAST, MEDIUM, SLOW, 3 settings |
| Integration time | [at 10 mΩ range, default value] FAST 2.0 ms, MED 5.0 ms, SLOW 1 PLC, Setting range: 0.1 ms to 100.0 ms, or 1 to 5 PLC at 50 Hz, 1 to 6 PLC at 60 Hz Note: PLC = one power line cycle (mains wave-form period) |
| Other functions | Comparator (compare setting value with measurement value), Delay, OVC (offset voltage compensation), Average, Measurement fault detection, Probe short-circuit detection, Improve contact, Current mode setting (A pulse application function that applies current only during measurement), Auto-memory, Statistical calculations, Settings monitor (when using two instruments, a difference in settings causes warning notification), Retry, Trigger function. etc,. |
| Interfaces | External I/O, RS-232C, Printer, GP-IB (Model RM3543-01) |
| External I/O | Trigger, Hold input, Comparator output, Settings monitor terminal, Service power output +5V, +12V, etc. |
| Power supply | 100 to 240 V AC, 50/60 Hz, 40 VA max. |
| Dimensions and mass | 260 mm (10.24 in) W × 88 mm (3.46 in) H × 300 mm (11.81 in) D, 3.0 kg (105.8 oz) |
| Contents | Power cord ×1, EXT. I/O male connector ×1, Instruction manual ×1, Operation guide ×1 |
|---|
| Order code | RM3543-01 (Built in GP-IB interface) |
|---|---|
| Note | Test fixtures are not supplied with the unit. Select an optional test fixture when ordering. |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Hioki RM2610
Hioki RM2610 Electrode Resistance Measurement System
System for lithium-ion battery electrode sheets that separates composite layer resistivity from the interface resistance to the current collector.
-
Enquire about Hioki RM3542-50
Hioki RM3542-50 Resistance Meter
Resistance meter for fast testing of small components: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode, applied voltage limit and contact improvement functions; fixtures sold separately.
-
Enquire about Hioki RM3542-51
Hioki RM3542-51 Resistance Meter with GP-IB
Resistance meter for fast testing of small components: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode, applied voltage limit and contact improvement functions; fixtures sold separately. Built-in GP-IB interface.
-
Enquire about Hioki RM3542C-1
Hioki RM3542C-1 Resistance Meter Standard Model
DC resistance meter for in-line testing of chip resistors and ferrite beads: 100 mΩ to 100 MΩ ranges, 0.9 ms FAST mode and jumper resistor support; probes and fixtures sold separately. Standard model.
