Hioki IM3523A LCR Meter
- Brand
- Hioki
- Model number
- IM3523A
- Category
- Component Testers
LCR meter with ±0.05% basic accuracy from DC and 40 Hz to 200 kHz, 2 ms test time, comparator and BIN functions, and back-to-back testing under mixed conditions such as C-D and ESR.
Price and availability on request
Key features
- ±0.05% accuracy with wide measurement range (DC, 40Hz to 200kHz, 5mV to 5V, 10uA to 50mA)
- Rapid 2 msec test time
- Built-in comparator and BIN functions
- Non-stop testing over mixed measurement conditions such as C-D(120 Hz) and ESR(100 kHz) at 10 times the speed of previous models (compared with Model 3532-50)
Specifications
| Measurement modes | LCR (Measurement with single condition), Continuous testing (Continuous measurement under saved conditions) |
|---|---|
| Measurement parameters | Z, Y, θ, X, G, B, Q, Rdc (DC resistance), Rs (ESR), Rp, Ls, Lp, Cs, Cp, D (tanδ) |
| Measurement range | 100 mΩ to 100 MΩ, 10 ranges (All parameters defined in terms of Z.) |
| Displayable range | Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ± (0.00000 [unit] to 9.99999G [unit]) Real value display for Z and Y only θ: ± (0.000° to 180.000°), D: ± (0.00000 to 9.99999) Q: ± (0.00 to 99999.9), Δ%: ± (0.0000% to 999.999%) |
| Basic accuracy | Z : ±0.05% rdg. θ: ±0.03° |
| Measurement frequency | 40 Hz to 200 kHz (5 digits setting resolution) |
| Measurement signal level | V mode, CV mode: 5 mV to 5 Vrms, 1 mVrms steps CC mode: 10 μA to 50 mArms, 10 μArms steps |
| Output impedance | 100 Ω |
| Display | Monochrome LCD |
| Measurement time | 2 ms (1 kHz, FAST, representative value) |
| Functions | Comparator, BIN measurement (classify function), Panel loading/saving, Memory function |
| Interfaces | EXT I/O (handler), USB communication (full-speed), LAN |
| Power supply | 100 to 240 V AC, 50/60 Hz, 50 VA max |
| Dimensions and mass | 260 mm (10.24 in) W × 88 mm (3.46 in) H × 203 mm (7.99 in) D, 2.1 kg (84.7 oz) |
| Contents | Power cord × 1 , CD-R (Includes Instruction manual, PC commands and Sample software) × 1, Startup guide× 1, Operating precautions× 1 |
|---|
| Order code | IM3523A |
|---|---|
| Note | This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. All probes are constructed with a 1.5D-2V coaxial cable. |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Hioki 3504-40
Hioki 3504-40 C HiTester with RS-232C
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in RS-232C interface.
-
Enquire about Hioki 3504-50
Hioki 3504-50 C HiTester with GP-IB
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in GP-IB and RS-232C, BIN function.
-
Enquire about Hioki 3504-60
Hioki 3504-60 C HiTester with GP-IB and 4-Terminal Contact Check
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in GP-IB and RS-232C, BIN function and contact failure detection on all 4 terminals.
-
Enquire about Hioki 3506-10
Hioki 3506-10 C Meter
High-speed C meter at 1 kHz and 1 MHz for stable low-capacitance testing on taping machines: 0.6 ms analog test time (1 MHz) and BIN sorting; probes and fixtures sold separately.
