Hioki 3504-50 C HiTester with GP-IB
- Brand
- Hioki
- Model number
- 3504-50
- Category
- Component Testers
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in GP-IB and RS-232C, BIN function.
Price and availability on request
Key features
- High speed measurement of 2ms
- Supports C measurements with voltage dependency characteristics through the use of constant voltage testing (CV)
- In all models, contact error is constantly monitored during measurement, contributing to increased yield
Specifications
| Measurement parameters | C (capacitance), D (loss coefficient tan δ) |
|---|---|
| Measurement range | C: 0.9400 pF to 20.0000 mF, D: 0.00001 to 1.99999 |
| Basic accuracy | (Typ.) C: ±0.09 % rdg. ±10 dgt., D: ±0.0016 |
| Measurement frequency | 120 Hz, 1 kHz |
| Measurement signal level | 100 mV (3504-60 only), 500 mV, 1 V rms CV 100 mV Measurement range: up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz) CV 500 mV Measurement range : up to 170 μF range (Source frequency 1 kHz), up to 1.45 mF range (Source frequency 120 Hz) CV 1V Measurement range : up to 70 μF range (Source frequency 1 kHz), up to 700 μF range (Source frequency 120 Hz) |
| Output impedance | 5Ω (In open terminal voltage mode outside of the CV measurement range) |
| Display | LED (six digits, full scale count depends on measurement range) |
| Measurement time | 2 ms (Typ. value. Depends on measurement configuration settings) |
| Functions | 4-terminal contact check function (3504-60 only) BIN (measurement values can be classified by rank) (3504-50, 3504-60), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, EXT. I/O, RS-232C, GP-IB (3504-50, 3504-60) |
| Power supply | Selectable from 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz, 110 VA max. |
| Dimensions and mass | 260 mm (10.24 in) W × 100 mm (3.94 in) H × 220 mm (8.66 in) D, 3.8 kg(134.0 oz) |
| Contents | Power cord ×1, Instruction manual ×1, Spare fuse ×1 |
|---|
| Order code | 3504-50 (Built-in GP-IB, RS-232C) |
|---|---|
| Note | This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C CABLE 9637 without hardware flow control. |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Hioki 3504-40
Hioki 3504-40 C HiTester with RS-232C
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in RS-232C interface.
-
Enquire about Hioki 3504-60
Hioki 3504-60 C HiTester with GP-IB and 4-Terminal Contact Check
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in GP-IB and RS-232C, BIN function and contact failure detection on all 4 terminals.
-
Enquire about Hioki 3506-10
Hioki 3506-10 C Meter
High-speed C meter at 1 kHz and 1 MHz for stable low-capacitance testing on taping machines: 0.6 ms analog test time (1 MHz) and BIN sorting; probes and fixtures sold separately.
-
Enquire about Hioki IM3523A
Hioki IM3523A LCR Meter
LCR meter with ±0.05% basic accuracy from DC and 40 Hz to 200 kHz, 2 ms test time, comparator and BIN functions, and back-to-back testing under mixed conditions such as C-D and ESR.
