Hioki 3506-10 C Meter
- Brand
- Hioki
- Model number
- 3506-10
- Category
- Component Testers
High-speed C meter at 1 kHz and 1 MHz for stable low-capacitance testing on taping machines: 0.6 ms analog test time (1 MHz) and BIN sorting; probes and fixtures sold separately.
Price and availability on request
Key features
- High-speed analog test time of 0.6 ms (at 1 MHz)
- Improved noise resistance and enhanced repeatability in measurement precision even for production lines
- 1 kHz and 1 MHz measurement frequency supports stable low capacitance testing with taping machines
- BIN function, for easy component screening
Specifications
| Measurement parameters | C (Capacitance), D (loss coefficient, tan δ), Q (1/tan δ) |
|---|---|
| Measurement range | C: 0.001 fF to 15.0000 μF, D: 0.00001 to 1.99999, Q: 0.0 to 19999.9 |
| Basic accuracy | (Typ.) C: ±0.14 % rdg., D: ±0.0013 |
| Measurement frequency | 1 kHz, 1 MHz |
| Measurement signal level | 500 mV, 1 V rms |
| Output impedance | 1 Ω (at 1 kHz in 2.2 μF and higher ranges), 20 Ω (in ranges other than the above) |
| Display | LED (six digits, full scale count depends on measurement range) |
| Measurement time | 1.5 ms: 1 MHz, 2.0 ms: 1 kHz (Typ. value. Depends on measurement configuration settings) |
| Functions | BIN (measurement values can be classified by rank), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, Current detection circuit monitoring, Applied voltage value monitoring, EXT. I/O, RS-232C, GP-IB |
| Power supply | Selectable from 100, 120, 220 or 240 V AC ±10 %, 50/60 Hz 40 VA max. |
| Dimensions and mass | 260 mm (10.24 in) W × 100 mm (3.94 in) H × 298 mm (11.73 in) D, 4.8 kg (169.3 oz) |
| Contents | Power cord × 1, Instruction manual × 1, Spare fuse × 1 |
|---|
| Order code | 3506-10 (Measurement frequencies: 1 kHz and 1 MHz) |
|---|---|
| Note | This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately. For an RS-232C connection: A crossover cable for interconnection can be used. You can use the RS-232C cable 9637 without hardware flow control. |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Hioki 3504-40
Hioki 3504-40 C HiTester with RS-232C
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in RS-232C interface.
-
Enquire about Hioki 3504-50
Hioki 3504-50 C HiTester with GP-IB
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in GP-IB and RS-232C, BIN function.
-
Enquire about Hioki 3504-60
Hioki 3504-60 C HiTester with GP-IB and 4-Terminal Contact Check
High-speed C meter (capacitance and D) for production: 2 ms measurement at 120 Hz or 1 kHz, constant-voltage mode for voltage-dependent capacitors; probes and fixtures sold separately. Built-in GP-IB and RS-232C, BIN function and contact failure detection on all 4 terminals.
-
Enquire about Hioki IM3523A
Hioki IM3523A LCR Meter
LCR meter with ±0.05% basic accuracy from DC and 40 Hz to 200 kHz, 2 ms test time, comparator and BIN functions, and back-to-back testing under mixed conditions such as C-D and ESR.
