Delta PMT-24V600W2BR 24V 25A 600W Panel Mount Power Supply, PMT2 Series

PMT2 panel mount power supply with 24V 25A output (600W) from 90-132Vac or 180-264Vac. Steel case and fan cooling, operating -40 to +70 °C.

Price and availability on request

Product
Series	PMT2 Series
Mounting	Panel mount

Output
Output Current	25A
Output Voltage	24V
Output Voltage Adjustment Range	21.6-27Vdc
Output Power	600W
Line Regulation	± 0.5% typ. @ 100-132Vac, 200-264Vac (Selectable by Switch)
Load Regulation	±0.5% @ 100-132Vac, 200-264Vac (Selectable by Switch)
PARD	< 240mVpp @ 0°C to 70°C / 720mVpp typ. @ -30°C to 0°C
Start-up Time	500 ms typ. @ 115 Vac & 230 Vac
Hold-up Time	16 ms typ. @ 115 Vac & 20 ms typ. @ 230 Vac
Dynamic Response (Overshoot & Undershoot O/P Voltage)	± 10% @ 115 & 230Vac input, 50-100% load (Slew Rate: 2.5A/μS, 50% duty cycle @ 120Hz & 1KHz)
Start-up with Capacitive Loads	8,000µF Max
Rise Time	30ms typ. @ 115Vac & 230Vac

Mechanical
Case Chassis / Cover	SGCC
Indicator	Green LED (DC OK)
Cooling System	Force Cooling
Wire	AWG 18-12 / Current rating can refer to page 6 “Wire AWG Table”
Unit Weight	1.10 kg (2.43 lb)
Dimensions	225 x 124 x 41 mm / 8.86” x 4.88” x 1.61”

Environment
Vibration (Operating)	IEC 60068-2-6, Sine Wave: 10Hz to 500Hz (2G); 10min per cycle, 60min for each axis (X, Y, Z)
Shock Test (Operating)	IEC 60068-2-27, Half Sine Wave: 10G for a duration of 11ms, 3 shock for each 3 directions.
Operating Temperature	-40°C to +70°C
Storage Temperature	-40°C to +85°C
Power De-rating	> 50°C de-rate power by 2% / °C / < 100Vac de-rate power by 2% / V / <200 Vac de-rate power by 1% / V / (80% load @ 90 Vac & 180 Vac)
Operating Humidity	20 to 90% (Non-Condensing)
Shock Test (Non-Operating)	IEC 60068-2-27, Half Sine Wave: 50G for a duration of 11ms, 3 shocks for each 3 directions
Vibration (Non-Operating)	IEC 60068-2-6, Random: 5Hz to 500Hz (2.09G); 20 min per axis for all X, Y, Z direction
Operating Altitude	0 to 5,000 Meters (0 to 16,400 ft)
Pollution Degree	3
Over Voltage Category	II

Protections
Overvoltage	27.2V-33.6V SELV Output, Latch Mode
Overload / Overcurrent	110-175% of rated load current, >5s into latch mode / (200% peak power for 5 seconds)
Over Temperature	Hiccup Mode, Non-Latching (Auto-Recovery)
Short Circuit	Latch mode
Protection Against Shock	Class I with PE* 6 connection

Reliability
MTBF	> 700,000 hrs as per Telcordia SR-332 I/P: 100Vac, O/P: 100% Load, Ta: 25°C)
Expected Cap Life Time	10 years (230 Vac, 50% load @ 40°C)

Safety
Electrical Safety	PMT-24V350W2BR: / TUV Bauart: EN 62368-1 / UL/cUL: UL 62368-1, and CAN/CSA C22.2 No. 62368-1 / CB scheme: IEC 62368-1; AS/NZS 62368-1 RCM / CQC: GB4943.1 / BIS: IS 13252 (Part 1) / BSMI: CNS 15598-1 / EAC: TP TC 004/2011 / UKCA: BS EN 62368-1
CE	In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU / This power supply does not comply with the harmonic current emission requirements specified in BS EN/EN61000-3-2. / Please ensure it is not used in applications where compliance with this standard is required.
Galvanic Isolation	Input to Output: 3.75 KVac / Input to Ground: 2.0 KVac / Output to Ground: 0.5 KVac
Safety Entry Low Voltage	SELV
UKCA	In conformance with Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016

EMC
Emission	(CE & RE) / EN/BS EN 55032, AS/NZS CISPR 32 Class A, KS C 9832 / Compliance to FCC Part 15 Title 47 class A, ASNI C63.4
Immunity	EN/BS EN 55035, KS C 9835

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.