Delta PMC-05V050W1AA 5V 10A 50W Panel Mount Power Supply, PMC Series

PMC panel mount power supply with 5V 10A output (50W) from 85-264Vac or 125-375Vdc. Aluminium case and convection cooling, operating -10 to +70 °C.

Price and availability on request

Universal AC input voltage range
Power will not de-rate for the entire input voltage range
Full corrosion resistant aluminium casing
Conforms to harmonic current IEC/EN 61000-3-2, Class A
High MTBF > 700,000 hrs. as per Telcordia SR-332
Safety approval according to IEC/EN/UL 60950-1, IEC/EN/UL 62368-1 and EMI to EN 55032, Class B

Product
Series	PMC Series
Mounting	Panel mount

Output
Output Current	10A
Output Voltage	5V
Output Voltage Adjustment Range	4.75-5.5Vdc
Output Power	50W
Line Regulation	< 0.5% typ. (@ 85-264Vac input, 100% load)
Load Regulation	< 1% typ. (@ 85-264Vac input, 0 to 100% load)
PARD	< 70mVpp
Start-up Time	< 2500ms @ nominal input (100% load)
Hold-up Time	> 15ms @ 115Vac, / > 80ms @ 230Vac (100% load)
Dynamic Response (Overshoot & Undershoot O/P Voltage)	± 5% @ 85-264Vac input, 0-100% load (Slew Rate: 0.1A/μs, 50% duty cycle @ 5Hz to 1KHz)
Start-up with Capacitive Loads	8,000µF Max
Rise Time	< 30ms @ nominal input (100% load)

Mechanical
Case Chassis / Cover	Aluminium
Indicator	Green LED DC OK
Cooling System	Convection
Noise Sound Pressure Level (SPL)	<40dBA
Input/Output Terminal	M3.5 x 5 Pins (Rated 300VAC/15A)
Wire	AWG 20-14
Unit Weight	0.26 kg (0.57 lb)
Dimensions	128 x 97 x 38 mm / 5.04” x 3.82” x 1.50”

Environment
Operating Temperature	-10°C to +70°C
Storage Temperature	-25°C to +85°C
Power De-rating	> 50°C de-rate power by 2.5% /°C
Operating Humidity	5 to 95% RH (Non-Condensing)
Shock Test (Non-Operating)	IEC60068-2-27, 30G (300m/S²) for a duration of 18ms 3 times per direction, 18 times in total
Vibration (Non-Operating)	IEC60068-2-6, 10Hz to 150Hz @ 50m/S² (5G peak); 20 min per axis for all X, Y, Z direction
Operating Altitude	0 to 3,000 Meters (9,840 ft)
Pollution Degree	2
Bump Test (Operating)	IEC 60068-2-29, Half Sine Wave: 10G for a duration of 11ms, 1,000 times per direction, 6,000 times in total
Over Voltage Category	II

Protections
Overvoltage	< 6.5V ±10%, SELV output, Hiccup Mode, Non-Latching (Auto-Recovery).
Overload / Overcurrent	> 120% of rated load current, Hicc-up Mode, Non-Latching (Auto recovery)
Over Temperature	< 75°C Ambient Temp@ 100% load, Non-Latching (Auto-recovery)
Short Circuit	Hiccup Mode, Non-Latching (Auto-Recovery when the fault is removed)
Protection Against Shock	Class I with Primary Earth connection

Reliability
MTBF	> 700,000 hrs. as per Telcordia SR-332 / I/P: 115Vac, O/P: 100% load, Ta: 25°C
Expected Cap Life Time	10 years (115Vac & 230Vac, 50% load @ 40°C)

Safety
Electrical Safety	SIQ Bauart : EN 60950-1, EN 62368-1 / UL/cUL recognized : UL 60950-1 and CSA C22.2 No. 60950-1 (File No. E191395), UL 62368-1 and CSA C22.2 No. 62368-1 (File No. E191395) / CB scheme : IEC 60950-1, IEC 62368-1 / KC : K 60950-1 / CCC : GB/T9254, GB17625.1 and GB4943.1 仅适用于海拔 2000m 以下地区安全使用
CE	In conformance with EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU
Galvanic Isolation	Input to Output: 3.0 KVac / Input to Ground: 1.5KVac / Output to Ground: 0.5 KVac
Safety Entry Low Voltage	SELV (IEC 60950-1)
UKCA	In conformance with Electrical Equipment (Safety) Regulations 2016 No. 1011 and / The Electromagnetic Compatibility Regulations 2016 No. 1091
KC	K 60950-1

EMC
Emission	(CE & RE) / Generic Standards: CISPR32, EN/BS EN 55032, KN32, FCC Title 47: Class B
Immunity	Generic Standards: EN/BS EN 55024, KN35
Harmonic Current Emissions	IEC/EN/BS EN 61000-3-2, Class A
Voltage Fluctuation and Flicker	IEC/EN/BS EN 61000-3-3

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.