Transducers and Measurement Accessories

Products

193 products Sort by Recommended Brand Model number Newest

• 

  Kyoritsu KEW 8148 Leakage and Load Current Clamp Sensor, 68mm

  Leakage and load current clamp sensor with a 68 mm jaw for the KEW 5010, 5020 and 6315. Not for power measurement.

  Enquire about Kyoritsu KEW 8148
• 

  Lutron EMF-824 EMF Adapter with Separate Probe for Multimeters

  Adapter that turns a digital multimeter on its DC 200 mV range into an EMF meter: 1 mV per milligauss, 30 to 300 Hz, single-axis separate probe.

  Enquire about Lutron EMF-824
• 

  Minilec D5 PTW1 Active Power Transducer

  Minilec D5 PTW1 active power transducer. Typical uses: cogeneration /captive power plants, control & relay panel, metering panels.

  Enquire about Minilec D5 PTW1
• 

  Rishabh CON CV AVG AC Voltage Transducer, 22.5 mm, Average

  Narrow 22.5 mm AC voltage transducer, average (calibrated to RMS) sensing, one output 0…10 mA, 0…20 mA, 2…10 mA, 4…20 mA, 0…5 V, 0…10 V, class 0.2, wide auxiliary supply.

  Enquire about Rishabh CON CV AVG
• 

  Kyoritsu KEW 8161 AC Clamp Sensor for Multimeters, 100A

  AC clamp sensor that converts current into a voltage for a digital multimeter, for AC currents up to 100 A.

  Enquire about Kyoritsu KEW 8161
• 

  Lutron LS-04 Current Shunt, 200 A, for DM-9131

  Current shunt for the DM-9131 car tester that gives 1 mV DC per ampere, so the meter can read DC currents up to 200 A.

  Enquire about Lutron LS-04
• 

  Minilec D5 PTW2 Reactive Factor Transducer

  Minilec D5 PTW2 reactive factor transducer. Typical uses: cogeneration /captive power plants, control & relay panel, metering panels.

  Enquire about Minilec D5 PTW2
• 

  Rishabh CON CV Dual AC Voltage Transducer, Dual Output

  Dual output AC voltage transducer, average (calibrated to RMS) sensing, two isolated outputs 0…10 mA, 0…20 mA, 2…10 mA, 4…20 mA, 0…5 V, 0…10 V, class 0.2, wide auxiliary supply.

  Enquire about Rishabh CON CV Dual
• 

  Kyoritsu KEW 8177 Ior Leakage Current Clamp Sensor, 40mm

  Ior leakage current clamp sensor with a 40 mm jaw, for use with the KEW 5050 Ior logger.

  Enquire about Kyoritsu KEW 8177
• 

  Lutron ST-50 Current Shunt, 50 A / 50 mV

  Current shunt that extends a multimeter to 50 A AC or DC with a 1 mV per ampere output, with overload capacity of 100 A for one minute.

  Enquire about Lutron ST-50
• 

  Minilec D5 PTW3 Apparent Power Transducer

  Minilec D5 PTW3 apparent power transducer. Typical uses: cogeneration /captive power plants, control & relay panel, metering panels.

  Enquire about Minilec D5 PTW3
• 

  Rishabh CON CV TRMS AC Voltage Transducer, 22.5 mm, True RMS

  Narrow 22.5 mm AC voltage transducer, true RMS sensing, one output 0…10 mA, 0…20 mA, 2…10 mA, 4…20 mA, 0…5 V, 0…10 V, class 0.2, wide auxiliary supply.

  Enquire about Rishabh CON CV TRMS
• 

  Kyoritsu KEW 8178 Ior Leakage Current Clamp Sensor, 68mm

  Ior leakage current clamp sensor with a 68 mm jaw, for use with the KEW 5050 Ior logger.

  Enquire about Kyoritsu KEW 8178
• 

  Rishabh CON Hz Programmable Frequency Transducer

  Frequency transducer for 45-55, 48-52, 55-65 or 45-65 Hz on 57-500 V inputs, single or dual 0/4-20 mA or 0-10 V outputs, class 0.2, optional LCD and RS485.

  Enquire about Rishabh CON Hz
• 

  Kyoritsu KEW 8309 Voltage Sensor for Floating Voltage

  Voltage sensor for the KEW 5020 logger that measures floating (ungrounded phase-to-phase) voltage. The KEW 5020-01 set is the logger supplied with one KEW 8309.

  Enquire about Kyoritsu KEW 8309
• 

  Rishabh CON I Programmable AC Current Transducer

  Programmable true RMS AC current transducer, class 0.2, with single or dual isolated 0/4-20 mA or 0-10 V outputs; programmed on site via optional LCD or RS485 Modbus.

  Enquire about Rishabh CON I
• 

  Rishabh CON I11 Self Powered AC Current Transducer

  Self powered AC current transducer: 1 A or 5 A input to 0-1/5/10/20 mA, 4-20 mA or 0-10 V output, class 0.5, response under 200 ms; DIN rail or wall mounting.

  Enquire about Rishabh CON I11
• 

  Rishabh CON M Multi Transducer with Analog / Relay Outputs

  Programmable 3 phase multi transducer for V, I, power, PF, frequency, energy and THD with 4 analog, 4 relay or 2 analog + 2 relay outputs, RS485 Modbus and USB; ±0.2% V / I.

  Enquire about Rishabh CON M
• 

  Rishabh CON M+ Programmable Multi-function Transducer

  4-in-1 programmable multi-function transducer for 1 or 3 phase systems: up to 4 isolated analog outputs and 2 relays, class 0.2 analog, class 0.5S energy, THD to 31st, RS485 and USB.

  Enquire about Rishabh CON M+
• 

  Rishabh CON P Programmable Power Transducer

  Programmable active, reactive and apparent power, phase angle and power factor transducer for 1 or 3 phase balanced / unbalanced systems; class 0.2, 1 or 2 outputs, LCD and RS485 options.

  Enquire about Rishabh CON P
• 

  Rishabh CON V Programmable AC Voltage Transducer

  Programmable true RMS AC voltage transducer, class 0.2, with single or dual isolated 0/4-20 mA or 0-10 V outputs; programmed on site via optional LCD or RS485 Modbus.

  Enquire about Rishabh CON V
• 

  Rishabh CT Ducer 70x30 Current Transformer with Transducer, 70 x 30 mm

  CT and transducer in one 70 x 30 mm window unit: AC current 50 A to 300 A to 4-20 mA or 0-20 mA DC, TRMS or average versions, class 0.5, spring clamp terminals.

  Enquire about Rishabh CT Ducer 70x30
• 

  Rishabh CT Ducer 90x40 Current Transformer with Transducer, 90 x 40 mm

  CT and transducer in one 90 x 40 mm window unit: AC current 50 A to 750 A to 4-20 mA or 0-20 mA DC, TRMS or average versions, class 0.5, spring clamp terminals.

  Enquire about Rishabh CT Ducer 90x40
• 

  Rishabh CW 500 Open Loop Hall Effect Current Transducer, ±500 A

  Open loop Hall effect current transducer for ±500 A nominal (±1500 A range), AC to 25 kHz, DC or pulsating DC, with ±4 V isolated output and ±15 V supply; 64 x 21 mm busbar aperture.

  Enquire about Rishabh CW 500

Show more products