Skip to content

Test & Measuring Instruments

Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.

All products in Test & Measuring Instruments

Rishabh CBCT 120 Core Balance Current Transformer

Core balance CT with 120 mm window (OD 153 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.

Enquire about Rishabh CBCT 120
Fluke 80K-6 High Voltage Probe, 6 kV

High voltage probe that extends a multimeter to 6000 V peak AC or DC on energy-limited circuits.

Enquire about Fluke 80K-6
CIE CIE/222M 4T 0-1/10/100/1000 Earth Tester 0-1-10-100-1,000 Ω, Four Range, 4 Terminal, Hand Driven

CIE/222M hand-cranked 4-terminal earth tester for earth resistance and specific soil resistivity, four range 0-1-10-100-1,000 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.

Enquire about CIE CIE/222M 4T 0-1/10/100/1000
Hioki BT4560-60 Battery Impedance Meter

Battery impedance meter for EIS from 0.01 Hz to 10 kHz, measuring impedance, voltage and temperature together, scalable with the switch mainframe; probes sold separately.

Enquire about Hioki BT4560-60
Meco 801 AUTO 3¾-Digit Autoranging Digital Multimeter

4000-count autoranging DMM: 1000 V DC, 750 V AC, 20 A AC/DC, 40 MΩ, 100 µF, frequency, duty cycle and temperature.

Enquire about Meco 801 AUTO
Kyoritsu KEW 2200 AC Clamp Meter 1000A, Slim

Ultra-slim, light 1000 A AC clamp meter (40 / 400 / 1000 A auto range) with a 33 mm tear-drop jaw, plus AC / DC volts, resistance and continuity, with fuseless protection up to 600 V.

Enquire about Kyoritsu KEW 2200
Waco WACO DET (low) Digital Earth Resistance Tester 0-5-500 Ω, Dual Range, 4 Terminal

Battery-powered Waco digital earth tester with 4 terminals, dual range 0Ω-5Ω-500Ω, rechargeable cells and a carrying case: a digital alternative to the hand-cranked earth tester.

Enquire about Waco WACO DET (low)
Metrel MI 2893 Power Master XT Class A Power Quality Analyser

Class A three-phase power quality analyser with 1 MSamples/s transient capture on all 8 channels: harmonics, flicker, events, inrush, RVC, waveform recorder, Ethernet and GPS sync; 4.3" colour display.

Enquire about Metrel MI 2893
Autonics KRN1000-0421-0S LCD Touchscreen Paperless Recorder KRN1000-0421-0S

Autonics KRN1000-0421-0S LCD touchscreen paperless recorder (KRN1000 Series): 640 × 480 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 4CH*IO2*COM.

Enquire about Autonics KRN1000-0421-0S
Selec MRJ385 Plug-N-Wire Multifunction Meter MRJ385

Selec MRJ385 Plug-N-Wire multifunction meter: Pulse Output, 100 to 240V AC, Self powered (V1, N) (50/60Hz), RS485 and MODBUS RTU, 96 x 96mm, panel mount.

Enquire about Selec MRJ385
Kusam Meco 2754A-T 1000 A DC / 800 A AC True RMS Clamp Meter

4000-count true RMS clamp meter for 800 A AC and 1000 A DC with 50 mm jaw, 30 ms max hold for inrush, capacitance and resistance to 40 MΩ; CAT III 600 V.

Enquire about Kusam Meco 2754A-T
HTC Instruments CL-2054 AC Leakage Current Tester

AC leakage current clamp tester from 40 mA (10 µA resolution) to 100 A, with 30 mm jaw, 3,999-count display with bar graph, relative/max/min and data hold. CAT II 600 V.

Enquire about HTC Instruments CL-2054
Lutron AP-9V220 DC 9 V Power Adapter, 220/230 V AC Input

Linear AC to DC 9 V adapter for 220/230 V AC, 50/60 Hz mains, with a round 2.5 mm output plug, for running Lutron meters without batteries.

Enquire about Lutron AP-9V220
Rishabh CBCT 210 Core Balance Current Transformer

Core balance CT with 210 mm window (OD 250 mm) for earth leakage relays: 600:1 ratio, 30 mA - 30 A operating range, class 3 or 15, UL approved, sealable terminal cap.

Enquire about Rishabh CBCT 210
Fluke 80K-15 High Voltage Probe, 15 kV

High voltage probe for multimeters: 0 to 15 kV DC or peak AC (10 kV rms AC), 1000:1 division ratio.

Enquire about Fluke 80K-15
CIE CIE/222M 4T 0-1/10/100/1000/10000 Earth Tester 0-1-10-100-1,000-10,000 Ω, Five Range, 4 Terminal, Hand Driven

CIE/222M hand-cranked 4-terminal earth tester for earth resistance and specific soil resistivity, five range 0-1-10-100-1,000-10,000 Ω, in a cast aluminium body. Accuracy ±5% to IS 9223:1979.

Enquire about CIE CIE/222M 4T 0-1/10/100/1000/10000
Hioki BT5525 Battery Insulation Tester

Insulation tester for battery production lines, with a BDD function that detects tiny short circuits caused by contamination and stable insulation testing in noisy environments.

Enquire about Hioki BT5525
Meco 801 JUNIOR 3 5/6-Digit TRMS Auto Ranging Digital Multimeter

6000-count TRMS autoranging DMM: 1000 V DC, 750 V AC, 10 A, 60 MΩ, capacitance, frequency, temperature, NCV, torch and magnetic holster.

Enquire about Meco 801 JUNIOR
Kyoritsu KEW 2200R AC Clamp Meter 1000A, Slim, CAT IV

Ultra-slim 1000 A AC clamp meter with a 33 mm tear-drop jaw, AC / DC volts, resistance and continuity, and fuseless protection up to 600 V. Rated CAT IV 300 V / CAT III 600 V.

Enquire about Kyoritsu KEW 2200R
Waco WACO DET (mid) Digital Earth Resistance Tester 0-10-1000 Ω, Dual Range, 4 Terminal

Battery-powered Waco digital earth tester with 4 terminals, dual range 0Ω-10Ω-1000Ω, rechargeable cells and a carrying case: a digital alternative to the hand-cranked earth tester.

Enquire about Waco WACO DET (mid)
Metrel MI 2992 Power Analyser Class A

Class A power analyser with 10.1" touch display: 24-bit sampling at 40 kS/s on 9 channels, harmonics to 63rd, class 1 power and energy, flicker, transients, inrush and RVC; Li-ion, Wi-Fi, Bluetooth, Ethernet.

Enquire about Metrel MI 2992
Autonics KRN1000-0431-0S LCD Touchscreen Paperless Recorder KRN1000-0431-0S

Autonics KRN1000-0431-0S LCD touchscreen paperless recorder (KRN1000 Series): 640 × 480 pixel resolution, 100-240 VAC 50 / 60 Hz supply, IP50 (front part, IEC standard). Order code note: 4CH*IO3*COM.

Enquire about Autonics KRN1000-0431-0S
Selec MX300 Single Phase Multifunction Meter MX300

Selec MX300 single phase multifunction meter: 85 to 300V AC / DC supply, RS485 MODBUS RTU protocol.

Enquire about Selec MX300
Kusam Meco 2781 1000 A AC/DC Digital Clamp Meter

1000 A AC / DC clamp meter (average sensing) with 40 mm jaw, DCA zero button, 1000 V DC / 750 V AC, resistance to 40 MΩ, capacitance and frequency to 10 MHz.

Enquire about Kusam Meco 2781

Show more products