Test Leads & Probes
Test leads, probes, clips and adapters for multimeters and testers. Use leads with a CAT rating equal to or higher than the instrument.
Products
-
Enquire about Kusam Meco PD-28
Kusam Meco PD-28 High Voltage Probe
High voltage probe that extends a multimeter to 40 kV DC or 28 kV AC: 1000 MΩ input impedance, 1000:1 attenuation, with needle and CRT-anode tips and ground clip.
-
Enquire about HTC Instruments TP-03A
HTC Instruments TP-03A Temperature Probe
K-type thermocouple probe for ambient temperature, −30 °C – 750 °C, with 3 mm diameter, 160 mm long probe and 1.5 m cable. Fits meters with a K-type socket.
-
Enquire about Fluke 80PK-10
Fluke 80PK-10 Pipe Clamp Temperature Probe, Large
Type K pipe clamp probe for pipes 32 mm to 64 mm, -29 °C to 149 °C, for temperature and superheat.
-
Enquire about Lutron LN-N01
Lutron LN-N01 K-Type Thermocouple Adapter
Adapter that connects a type K thermocouple to the input sockets of a meter, for low voltage use only.
-
Enquire about HTC Instruments TP-04
HTC Instruments TP-04 Temperature Probe
Temperature probe for ambient temperature, −40 °C – 260 °C, 1 m long. Plugs into multimeter jacks.
-
Enquire about Fluke 80PK-11
Fluke 80PK-11 Type K Velcro Cuff Temperature Probe
Type K flexible cuff (hook-and-loop) thermocouple for hands-free pipe temperature measurement in HVAC.
-
Enquire about Lutron LN-N02
Lutron LN-N02 Flexible Test Probe Tip, 0.75 mm
Flexible 0.75 mm gold-plated probe tip that plugs into any 2 mm test lead, for reaching miniature parts and fine pitch contacts.
-
Enquire about Fluke 80PK-22
Fluke 80PK-22 SureGrip Immersion Temperature Probe
Type K immersion probe for liquids and gels, -40 to 1090 °C, Inconel sheath.
-
Enquire about Lutron LN-N07
Lutron LN-N07 Test Probe Tip, 1 mm Stainless Steel
Stainless steel 1 mm probe tip with a 58 mm shaft for 2 mm test leads, rated 2 A, CAT III 1000 V.
-
Enquire about Fluke 80PK-24
Fluke 80PK-24 SureGrip Air Temperature Probe
Type K air and gas temperature probe with baffle-protected bead, -40 to 816 °C.
-
Enquire about Lutron LN-N13
Lutron LN-N13 Mini Test Hook Clip
Mini hook clip on a short lead with a 2 mm jack, rated 2 A and CAT II 300 V, for gripping component legs and thin wires.
-
Enquire about Fluke 80PK-25
Fluke 80PK-25 SureGrip Piercing Temperature Probe
Type K piercing probe for the food industry, liquids and gels, -40 to 260 °C.
-
Enquire about Lutron LN-N14
Lutron LN-N14 Micro Test Hook Clip
Micro hook clip for very thin wires and IC pins at 1.27 mm spacing, on a short lead with a 2 mm jack, rated CAT II 300 V.
-
Enquire about Fluke 80PK-26
Fluke 80PK-26 SureGrip Tapered Temperature Probe
Type K probe with tapered tip for air, non-caustic gas and surface measurements, -40 to 816 °C.
-
Enquire about Lutron LN-N19
Lutron LN-N19 Little Alligator Clip, 2 mm Jack
Little alligator clip with a 5 mm jaw on a short braided lead with a 2 mm jack, rated 2 A and CAT II 300 V.
-
Enquire about Fluke 80PK-27
Fluke 80PK-27 SureGrip Industrial Surface Temperature Probe
Type K industrial surface probe with durable ribbon sensor, -127 to 600 °C.
-
Enquire about Lutron LN-N46
Lutron LN-N46 Flat Alligator Clip, 2 mm Jack
Flat-jaw alligator clip on a short braided lead with a 2 mm jack, rated 2 A and CAT II 300 V.
-
Enquire about Fluke AC220
Fluke AC220 SureGrip Alligator Clips
Insulated SureGrip alligator clips with nickel-plated jaws for round screw heads up to 9.5 mm.
-
Enquire about Lutron LN-S05
Lutron LN-S05 Safety Test Lead Set, Right Angle, 1000 V
Safety test leads with right-angle 4 mm banana plugs and 2 mm probe tips, 900 mm long, rated 10 A, CAT III 1000 V and CAT IV 600 V.
-
Enquire about Fluke AC280
Fluke AC280 SureGrip Hook Clips
SureGrip hook clips (red and black) narrowing to 5.6 mm at the tip, for secure connections in tight spots.
-
Enquire about Lutron LN-S09
Lutron LN-S09 Safety Test Lead Set, Straight, 1000 V
Safety test leads with 4 mm banana plugs and 2 mm probe tips, 900 mm long, rated 10 A, CAT III 1000 V and CAT IV 600 V.
-
Enquire about Fluke AC285
Fluke AC285 SureGrip Large Alligator Clips
Large SureGrip alligator clips (red and black) with nickel-plated steel jaws for wires to 20 mm bolts.
-
Enquire about Lutron NB-24
Lutron NB-24 BNC to N Coaxial Connector Adapter
Adapter from a BNC connector to an N coaxial connector, an optional accessory for Lutron frequency counters with N-type inputs.
-
Enquire about Fluke i200s
Fluke i200s AC Current Clamp, 200 A
Dual-range AC current clamp (20 A / 200 A) with BNC output for ScopeMeters, power quality meters and multimeters.
