Autonics BF4GP Button Adjustment Fiber Optic Amplifier BF4GP
- Brand
- Autonics
- Model number
- BF4GP
- Category
- Fiber Optic Sensors
Autonics BF4GP button adjustment fiber optic amplifier (BF4 Series): ≤ 50 mA ; ≤ 100 mA. Order code note: 12-24VDC(NEW).
Price and availability on request
Key features
- High response time: max. 0.5 ms
- Auto sensitivity setting (button setting) / remote sensitivity setting type
- External synchronization input, mutual interference protection, self-diagnosis
- Reverse power protection and output short overcurrent protection circuit
- Timer function: OFF delay timer approx. 40 ms fixed. (standard type, remote sensitivity setting type only)
- Automatically selectable Light ON / Dark ON
- Precise detection of small target and easy to install in the complicated place
Specifications
| Series | BF4 Series |
|---|---|
| Order code description | 12-24VDC(NEW) |
| Catalogue model group | BF4G□-□ |
| Light source | Green LED |
|---|---|
| Peak emission wavelength | 525 nm, modulated |
| Response time | Built-in 2 differential frequencies (frequency 1: ≤ 0.5 ms, frequency 2: ≤ 0.7 ms) |
| Sensitivity setting | Button / Remote sensitivity setting |
| Operation mode | Light ON / Dark ON selectable |
| Self-diagnosis output | YES |
| Load voltage | ≤ 30 VDC |
| Load current | ≤ 50 mA ; ≤ 100 mA |
| Residual voltage | NPN: ≤ 1 VDC (load current: 50 mA), ≤ 0.4 VDC (load current: 16 mA) PNP: ≤ 2.5 VD C ; NPN: ≤ 1 VDC (load current: 100 mA), ≤ 0.4 VDC (load current: 16 mA) PNP: ≤ 2.5 VD C |
| Indicator | Operation indicator (red), stability indicator (green) |
| Unit weight (packaged) | ≈ 65 g (≈ 120 g) |
| Power supply | 12-24 VDC ±10% (ripple P-P: ≤ 10%) |
| Current consumption | ≤ 45 mA |
| Control output | NPN open collector output / PNP open collector output model |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | ±240 VDC the square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50 / 60 Hz for 1 min |
| Vibration | 1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 500 m/s² (≈ 50 G) in each X, Y, Z directions for 3 times |
| Ambient illuminance (receiver) | Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx |
| Ambient temperature | -10 to 50 ℃, storage: -20 to 70 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation) |
| Cable spec. | Standard type: Ø 4 mm, 4-wire, 2 m External synchronization input, remote sensitivity setting type: Ø 4 mm, 6-wire, 2 m |
| Wire spec. | Standard type: AWG22 (0.08 mm, 60-core), insulator outer diameter: Ø 1.25 mm External synchronization input, remote sensitivity setting type: AWG24 (0.08 mm, 40-core), insulator outer diameter: Ø 1 mm |
| Material | Case: heat-resistance ABS, cover: PC |
| Sold separately | Fiber optic units |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BF3RX
Autonics BF3RX Volume Adjustment Fiber Optic Amplifier BF3RX
Autonics BF3RX volume adjustment fiber optic amplifier (BF3 Series): ≤ 200 mA. Order code note: 12-24VDC.
-
Enquire about Autonics BF3RX-P
Autonics BF3RX-P Volume Adjustment Fiber Optic Amplifier BF3RX-P
Autonics BF3RX-P volume adjustment fiber optic amplifier (BF3 Series): ≤ 200 mA. Order code note: 12-24VDC.
-
Enquire about Autonics BF4G-R
Autonics BF4G-R Button Adjustment Fiber Optic Amplifier BF4G-R
Autonics BF4G-R button adjustment fiber optic amplifier (BF4 Series): ≤ 50 mA ; ≤ 100 mA. Order code note: 12-24VDC(NEW).
-
Enquire about Autonics BF4R
Autonics BF4R Button Adjustment Fiber Optic Amplifier BF4R
Autonics BF4R button adjustment fiber optic amplifier (BF4 Series): ≤ 50 mA ; ≤ 100 mA. Order code note: 12-24VDC(NEW)(ENG).
