Automation, Drives & PLC
Drives, controllers, panel meters, relays and accessories for control panels and machines. Choose a category, or send us your panel requirement and we will suggest suitable models.
All products in Automation, Drives & PLC
-
Enquire about Rishabh 252-PAU
Rishabh 252-PAU Single Phase Under Current Relay
Single-phase AC under current relay from 1 A / 5 A CT: trips when the current falls below the 40 - 120% setpoint after an adjustable delay up to 10 s; DPDT contacts, auto reset.
-
Enquire about Unison UNI 101 PMDD 200 15 00
Unison UNI 101 PMDD 200 15 00 Solid State Relay 101, DC to DC MOSFET, 15 A, 5-200 V DC
45 mm hockey-puck solid state relay with a power MOSFET output (101 series), switching 15 A DC loads at 5-200 V DC from a 4-32 V DC control signal, with no output leakage current.
-
Enquire about Veritek CBCT-N 50
Veritek CBCT-N 50 Core Balance Current Transformer, 50 mm, DIN Rail
DIN-rail core balance CT, N series, 50 mm inner diameter, encapsulated ABS, ratios to match common earth leakage relays.
-
Enquire about Multispan APFC-308
Multispan APFC-308 Automatic Power Factor Controller, 8 Stage, 3 CT
8-stage automatic power factor controller with three-CT current sensing (primary 5 to 9999 A), auto, manual and rotation modes for capacitor banks, and an alarm output.
-
Enquire about Meco C96
Meco C96 AC Moving Coil Rectifier DIN Panel Ammeter / Voltmeter
AC moving coil rectifier DIN panel ammeter / voltmeter, 90° or 240° deflection, 1 mA – 5 A or 10 – 1000 V direct, ±1.5% of full scale.
-
Enquire about Adi-Artech 20210-AL
Adi-Artech 20210-AL S Beam Load Cell
Adi-Artech strain gauge S beam load cell, 0-1 Kgf to 0-10 Kgf for tension and compression, in nickel-plated tool steel, IP65 sealed. For bag weighing machine, in-line force measurement, press force monitoring.
-
Enquire about Minilec AUTO SWITCH 2
Minilec AUTO SWITCH 2 Auto Switch for Agricultural Pump Starters
Minilec AUTO SWITCH 2 auto switch for agricultural pump starters with 1 NO output, for 200 - 450 VAC, 50 Hz ± 3% supply. Typical uses: agricultural pump DOL starters, pump sets at farms, rivers, and wells, agricultural pump star delta starter.
-
Enquire about EAPL A1D1(WB)
EAPL A1D1(WB) ON Delay Timer, Wide Band V2.0, 3 s to 30 s
EAPL A1D1(WB) on delay timer from the A series (wide band v2.0), 3 s to 30 s, 1 C/O, for 264 V - 456 V AC supply.
-
Enquire about Masibus 406/408-M
Masibus 406/408-M Digital Indicator
Masibus 406/408-M digital indicator: input Current, voltage. For current/voltage monitoring in drive panel, RPM monitoring for VFD.
-
Enquire about Proton 2 ALO-20-323
Proton 2 ALO-20-323 Voltage Scanner
Voltage scanner with LED status indication (Proton 2 ALO-20-323). Door mounting.
-
Enquire about Lutron DR-99ACA
Lutron DR-99ACA AC Current Panel Meter, 3½ Digit LED
DIN 96 x 48 mm panel meter for AC current up to 10 A in six jumper-selected ranges, with a 14 mm red LED 3½-digit display, powered from 110/220/230 V AC.
-
Enquire about JiGO
JiGO E5C Series
Jigo E5C series, for heating and process temperature control.
-
Enquire about Cautoni D200-2-0R7-00-C
Cautoni D200-2-0R7-00-C D200 Series VFD, 0.75 kW, Single Phase 220V Input
Cautoni D200 variable frequency drive for single phase 220 V, 50 Hz supply: 0.75 kW motor in heavy duty, 1.5 kW in light duty. V/F and vector control, RS-485, built-in PID, IP20 ABS case.
-
Enquire about Exceltech WOD
Exceltech WOD Motor Protection Relay with Built-in CT
DIN-rail motor protection relay with built-in CT and LED fault indication: overload (inverse curve), under current, single phasing and unbalance. WOD-5, WOD-20 and WOD-40 for 1 A to 40 A motors.
-
Enquire about Kusam Meco DM3S
Kusam Meco DM3S 3-Channel Current Loop (4 – 20 mA) Meter with 3 Displays
4-digit 3-channel 4 – 20 mA loop panel meter (2-wire, external 24 V), programmable display per channel, 3 or 4 alarm relays, analog output and RS-485 Modbus.
-
Enquire about Autonics ADS-SE2
Autonics ADS-SE2 Automatic Door Side Sensor ADS-SE2
Autonics ADS-SE2 automatic door side sensor (ADS-SE1/2 Series): sensing distance 0 to 10 m, Through-beam type, Relay contact output, IP30 (IEC standard). Order code note: 12-24VAC/VDC(NEW).
-
Enquire about Selec 55MF-P8
Selec 55MF-P8 Analog Timer, Plug-in 55MF-P8
Selec 55MF-P8 analog timer, plug-in: output 2 X 1 C/O SPDT, 20-240V AC / DC (50/60 Hz) supply, 48 x 48mm, plug / panel mount.
-
Enquire about Delta AH Motion CPU
Delta AH Motion CPU Motion Control CPU, EtherCAT
Motion CPU for AH systems with EtherCAT: 8 / 16 / 32 axes synchronised in 0.5 / 1 / 2 ms, 2 to 6-axis linear, arc and helical interpolation, G-code, E-Cam, a 256 k-step program and hot-swap support.
-
Enquire about Rishabh 252-PBA
Rishabh 252-PBA Transducer Trip Relay, Low Trip
Trip relay for transducer outputs (0-1 to 4-20 mA or 1 - 50 V DC) that operates on a low signal; adjustable setpoint and delay, DPDT contacts.
-
Enquire about Unison UNI 101 PMDD 200 25 00
Unison UNI 101 PMDD 200 25 00 Solid State Relay 101, DC to DC MOSFET, 25 A, 5-200 V DC
45 mm hockey-puck solid state relay with a power MOSFET output (101 series), switching 25 A DC loads at 5-200 V DC from a 7.5-32 V DC control signal, with no output leakage current.
-
Enquire about Veritek CBCT-N 70
Veritek CBCT-N 70 Core Balance Current Transformer, 70 mm, DIN Rail
DIN-rail core balance CT, N series, 70 mm inner diameter, encapsulated ABS, ratios to match common earth leakage relays.
-
Enquire about Multispan APFC-9608
Multispan APFC-9608 Automatic Power Factor Controller, 8 Stage, Single CT
8-stage automatic power factor controller using a single CT and two-phase voltage input, with auto, manual and rotation switching of capacitor steps.
-
Enquire about Meco CCT50
Meco CCT50 Clamp-On AC Current Transformer
Clamp-on (split core) AC current transformer, 50 – 400 Hz, silicon steel / permalloy core, 2 m twisted lead; fits over big cables or busbars.
-
Enquire about Adi-Artech 20210-MINI
Adi-Artech 20210-MINI S Beam Load Cell - Mini
Adi-Artech strain gauge S beam load cell - mini, 0-100 Kgf for tension and compression, in nickel-plated tool steel, IP65 sealed. For hanging scale.
