Selec RPS480 DIN Rail Power Supply RPS480

Selec RPS480 DIN rail power supply: input 90 - 264 VAC (127 - 370 VDC), output 24V & 48V, 35 mm DIN rail.

Price and availability on request

Specifications
Input Voltage	90 - 264 VAC (127 - 370 VDC)
Input Frequency	50/60 Hz
Inrush Current	< 48 Amps; Measured at 264 VAC, 25°C Ambient, Cold start
Output Voltage	24V & 48V
Output Power	480 W
Voltage Tolerance	± 1 %
Line Regulation	< 1% of Vout
Load Regulation	± 1 %
Turn On Time	< 1 sec @ 230 VAC & < 3 sec @ 115 VAC, Full load
Hold Up Time	≥60ms at 230V AC & ≥15ms at 115V AC, Full load
Rise Time	< 100 ms
Overload Protection	> 110% of rated output current; Hiccup type; Autorecovery
Overvoltage Protection	Latched type; Input AC power to be recycled to recover the power supply
Output Short Circuit Protection	Hiccup mode when output is shorted; Autorecovery type
Operating Temperature	- 25°C to + 70°C; De-rate linearly above 50°C from 100 % load at 50°C to 50 % load at 70°C,- 25°C to 0°C start-up is guaranteed with specification deviation
Storage Temperature	- 40°C to + 85°C
Cooling	Natural convection cooled
Humidity	5 to 95 % RH, Non condensing
Altitude	2000 m
Dimension	60 x 154 x 158.55 mm (W x H x D)
Weight	1050 gms
Mounting	35 mm Din rail

Ordering codes
RPS480-24-CU	Description 480W, 24V/20A DIN rail mounted Power Supply in Plastic Housing, Certification CE,UL
RPS480-48-CU	Description 480W, 48V/10A DIN rail mounted Power Supply in Plastic Housing, Certification CE,UL

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.