Selec RPS15 DIN Rail Power Supply RPS15

Selec RPS15 DIN rail power supply: input 90 - 264 VAC (127 - 370 VDC), output 5 V to 24 V, 35 mm DIN rail.

Price and availability on request

Specifications
Input Voltage	90 - 264 VAC (127 - 370 VDC)
Input Frequency	50/60 Hz
Inrush Current	< 30 Amps; Measured at 264 VAC, 25°C Ambient, Cold start
Output Voltage	5 V to 24 V
Output Power	15 W
Voltage Tolerance	± 1 %
Line Regulation	± 1 %
Load Regulation	± 1 %
Turn On Time	< 1 sec, full load
Hold Up Time	30 ms @ 230 VAC & 10 ms @ 115 VAC, full load
Rise Time	< 100 ms
Overload Protection	110 % to 150 % of rated output current; Hiccup type, Autorecovery
Output Short Circuit Protection	Hiccup mode when output is shorted; Autorecovery type
Operating Temperature	-40°C to +70°C; De-rate linearly above 50°C from 100 % load at 50°C to 50 % load at 70°C. Note : Only start up guaranteed at -40°C with spec deterioration.
Storage Temperature	-40°C to +85°C
Cooling	Natural convection cooled
Humidity	5 to 95 % RH, Non condensing
Altitude	2000 m
Dimension	17.5 x 90 x 65 mm(W x H x D)
Weight	< 100 gms
Mounting	35 mm DIN Rail

Ordering codes
RPS15-05-CE	Description 12 W, 05 V / 2.4 A DIN rail mounted Power Supply in Plastic Housing, Certification CE
RPS15-12-CE	Description 15 W, 12 V / 1.25 A DIN rail mounted Power Supply in Plastic Housing, Certification CE
RPS15-24-CE	Description 15 W, 24 V / 0.63 A DIN rail mounted Power Supply in Plastic Housing, Certification CE

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.