54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Selec RPS40 DIN Rail Power Supply RPS40

Selec RPS40 DIN Rail Power Supply RPS40

Brand
Selec
Model number
RPS40

Selec RPS40 DIN rail power supply: input 90 - 264 VAC (127 - 370 VDC), output 12 V to 48 V, 35 mm DIN rail.

Price and availability on request

Request a quote

Sent with the product details: Selec RPS40 DIN Rail Power Supply RPS40.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Supports 90 - 264 VAC / 127 - 370 VDC
  • Efficiencies up to 85 %
  • Protection against short circuit, overload
  • Cooling by free air convection
  • Full power between -25°C to +50°C

Specifications

Specifications
Input Voltage90 - 264 VAC (127 - 370 VDC)
Input Frequency50/60 Hz
Inrush Current< 60 Amps; Measured at 264 VAC, 25°C Ambient, Cold start
Output Voltage12 V to 48 V
Output Power40 W
Voltage Tolerance± 1 %
Line Regulation± 1 %
Load Regulation± 1 %
Turn On Time< 1 sec @ 230 VAC & < 3 sec @ 115 VAC, Full load
Hold Up Time≥ 25 ms @ 230 VAC & ≥ 6 ms @ 115 VAC, Full load
Rise Time< 100 ms
Overload Protection> 110 % of rated output current; Hiccup mode; Autorecovery type
Overtemperature ProtectionPower supply shuts down when the temperature of PCB below main transformer reaches typically 120°C; Turns on only after the temperature falls below 90°C typically and AC power is recycled thereafter
Overvoltage ProtectionHiccup mode when output over voltage occur; Autorecovery type
Output Short Circuit ProtectionHiccup mode when output is shorted; Autorecovery type.
Operating Temperature- 25°C to + 70°C; De-rate linearly above 50°C from 100 % load at 50°C to 50 % load at 70°C. -25°C to 0°C startup is guaranteed with specification deviation(Output ripple can be more than 10 % of the output voltage.)
Storage Temperature- 40°C to + 85°C
CoolingNatural convection cooled
Humidity5 to 95 % RH, Non condensing
Altitude2000 m
Dimension35 x 90 x 60 mm ( W x H x D )
Weight< 150 gms
Mounting35 mm DIN Rail
Ordering codes
RPS40-12-CEDescription 30 W, 12 V / 2.5 A DIN rail mounted Power supply in plastic Housing, Certification CE
RPS40-15-CEDescription 40 W, 15 V / 2.67 A DIN rail mounted Power supply in plastic Housing, Certification CE
RPS40-24-CEDescription 40 W, 24 V/ 1.67 A DIN rail mounted Power supply in plastic Housing, Certification CE
RPS40-48-CEDescription 40 W, 48 V / 0.83 A DIN rail mounted Power supply in plastic Housing, Certification CE

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products