Multispan WLC-35 Water Level Controller, 6 Probe
- Brand
- Multispan
- Model number
- WLC-35
- Category
- Protection & Monitoring Relays
DIN-rail water level controller for an upper and lower tank using 6 probes, with adjustable sensitivity (1 kΩ to 1 MΩ), delay and level LEDs, protecting the pump from dry running and overflow.
Price and availability on request
Key features
- Input: 6 Probes
- Sensitivity Adjustable: 1K Ohm to 1M Ohm
- Delay Time (0-10) Sec
- High & Low-Level Indication LED for Lower & Upper Tank
- Pump protection from Dry run & Overflow condition
- Size: (H)90mm x (W)35mm x (D)62.5mm
- Supply Voltage: 100-270V AC, 50/60Hz
Specifications
| Mounting | Din Rail Mounting |
|---|---|
| Input Sensor | 6 nos. prods |
| Indications | LED 1: Relay; LED 2: High Level (Lower); LED 3: Low Level (Lower); LED 4: Mains; LED 5: High Level (Upper); LED 6: Low Level (Upper) |
| Power Supply | 100 270V AC, 50/60 Hz, 3VA |
| Output Rating | 5Amp, 230V AC (Resistive) |
| Dimension | 90 x 35 x 62.5 mm |
| Output | 1 Relay, 1 C/O (NO-C-NC) |
| Sensitivity | 1 to 1Mega ohms |
| Reset | Auto |
| Trip Delay | 0 to 10 sec (Selectable) |
| Typical uses | Perfect for Drain & Fill Control, Water Distribution Pump Stations, Submersible Pump Panels, Soda Machines, Textile Industry Setups, Boiler Panels |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Multispan APFC-308
Multispan APFC-308 Automatic Power Factor Controller, 8 Stage, 3 CT
8-stage automatic power factor controller with three-CT current sensing (primary 5 to 9999 A), auto, manual and rotation modes for capacitor banks, and an alarm output.
-
Enquire about Multispan APFC-9608
Multispan APFC-9608 Automatic Power Factor Controller, 8 Stage, Single CT
8-stage automatic power factor controller using a single CT and two-phase voltage input, with auto, manual and rotation switching of capacitor steps.
-
Enquire about Multispan CC-12
Multispan CC-12 Current Protection Relay, Panel Mount
Panel-mount digital current relay with 4+4-digit display, programmable over- and under-current trips and one 5 A relay. 96 x 96 mm, 100-270 V AC supply.
-
Enquire about Multispan CPR-35
Multispan CPR-35 Current Protection Relay, Digital DIN Rail
Digital DIN-rail relay with programmable over- and under-current trips, one changeover relay and fail-safe or non-fail-safe mode. Single and three-phase versions; 35 mm wide.
