Minilec S2 DCMR Phase Failure Relay
- Brand
- Minilec
- Model number
- S2 DCMR
- Category
- Protection & Monitoring Relays
Minilec S2 DCMR phase failure relay with (1 CO + 1 CO) / 2 CO output. Typical uses: hoist motor control, 3 ph. split AC machines, agricultural pump starters.
Price and availability on request
Key features
- Under Current
- Over Current
Specifications
| Display | LCD (3 Digit Liquid Crystal Display With Backlight) |
|---|---|
| Resetting Mode | Auto / Manual Reset |
| Enclosure | S2 FR GRADE Enclosure |
| Weight | 150 gms. approx. |
| Note | Display backlight flashes (ON & OFF) if the unit trips due to any fault. ; Wherever not specified Contact Rating : 5A @ 250 V AC (resistive) |
| System | 100 - 120 / 220 - 240 / 380 - 440 VAC -25%, +20% |
|---|---|
| Auxiliary | 100 - 120 / 220 - 240 / 380 - 440 VAC ± 20%, 24 VDC -25%, +20% |
| Frequency | 48 - 63 Hz |
| Power Consumption | 25 VA max. |
| Output Relay Contact | (1 CO + 1 CO) / 2 CO |
|---|---|
| Contact Rating | 5A @ 250 VAC / 30 VDC (Resistive) |
| Monitoring | Current |
|---|---|
| Protections | Under Current, Over Current |
| Display Parameter | Current |
|---|---|
| Resolution (Current) | 0.10 / 1 AMP. |
| Display Accuracy | ± 5% (± 0.1 digit) at rated current |
| UC / OC | ± 2% of set value |
|---|---|
| Power On Delay / Trip Delay | ± 5% of set value (± 1 sec for 1 to 10 Sec Ranges) |
| ON (Green) | Power ON |
|---|---|
| TRIP (Red) | Relay Trip due to Under Current / Over Current fault |
| Operating Temperature | -5 °C to + 60 °C |
|---|---|
| Storage Temperature | -10 °C to + 60 °C |
| Humidity | Up to 95% R.H. |
| Mounting | 35 mm Din Rail mounting |
|---|
| Overall (L x W x H) | 93 x 35 x 61 |
|---|
| Terminals | Suitable for 2.5 sq.mm cable |
|---|---|
| Torque | 0.6 Nm max. |
| Applications | Hoist Motor Control, 3 Ph. Split AC machines, Agricultural Pump Starters, Machine Tools, Valve Actuator Motor, Injection Molding M/c |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Minilec ALV D2
Minilec ALV D2 Phase Failure Relay
Minilec ALV D2 phase failure relay with 2 CO output. Typical uses: AC & R chiller compressor motors, AHU fan /pump motors, hoist & crane.
-
Enquire about Minilec D1 VCR1
Minilec D1 VCR1 Voltage Monitoring Relay
Minilec D1 VCR1 voltage monitoring relay with 2 CO output. Typical uses: battery charger & float charger panels, UPS for office computers, telecom power supply units.
-
Enquire about Minilec D2 EFR1
Minilec D2 EFR1 Earth Fault / Earth Leakage Relay
Minilec D2 EFR1 earth fault / earth leakage relay, for 24-30 VDC / 110-240 V AC / DC supply. Typical uses: generator panels, AMF panels, MCC panels, synchronizing control panels.
-
Enquire about Minilec D2 VCT1
Minilec D2 VCT1 Voltage Monitoring Relay
Minilec D2 VCT1 voltage monitoring relay with 1 CO + 1 CO / 2 CO output. Typical uses: battery charger panels, generator set panels, auto mains failure panels.
