Metrel MI 3215 TeraOhmHP 15 kV Insulation Tester
- Brand
- Metrel
- Model number
- MI 3215
- Category
- Insulation Resistance Testers
15 kV high-performance insulation tester measuring up to 35 TΩ: test voltages 30 V to 16.0 kV, DAR, PI, DD, step and ramp tests, capacitance; Li-ion or mains, IP65 case, CAT IV 1000 V, Bluetooth.
Price and availability on request
Key features
- Insulation resistance measurement
- Diagnostic test (PI, DAR, DD)
- Step voltage test
- Withstanding voltage test (DC) up to 15 kV
- Voltage and frequency measurement up to 999 V TRMS
- Capacitance measurements
- Insulation resistance measurements of up to 35 TΩ
- Safety rated category up to CAT IV 1000 V to 3000 m
- Dual-case design
- Coded banana connectors with locking feature
- Newly designed HV crocodiles with a better grip
- Li-ion battery 4400 mAh
- Adjustable test voltage (50 V...15 kV) in 50 V and 100 V steps
- Maximum short circuit/charge current: >6mA
- Charging rate for capacitive load <4s / μF at 15 kV (mains supply); 6.3s / μF (battery supply)
- Discharging rate for capacitive load <1.6s / μF at 15 kV
- 8 GB memory SD card for data saving
- Burn or breakdown mode
- Programmable timers
- Automatic discharge of test object after finished measurement
- Live voltage detection > 30 V
- IP65 case rating
Specifications
| Test voltage | 30 V ... 16.0 kV; ±(3 % of reading + 3 D) |
|---|---|
| Current | 0 nA ... 6.00 mA; ±(5 % of reading + 7 D) up to 9.99 nA |
| Measuring range | 0.01 MΩ ... 35.0 TΩ |
| Accuracy | ±(5 % of reading) at typical Riso values for each test voltage |
| Capacitance | 20 nF ... 50.0 μF; ±(5 % of reading + 3 D) |
|---|---|
| DAR, PI, DD | Diagnostic insulation indices |
| Frequency | 45.0 Hz ... 65.0 Hz; ±(0.2 % of reading + 1 D) |
|---|---|
| Voltage | 30.0 V ... 999 V; ±(2 % of reading + 3 D) |
| Battery power supply | 14.4 V; 4.4 Ah Li-ion pack; charging 4 hours |
|---|---|
| Mains power supply | 100 ... 240 VAC, 45 ... 65 Hz, 100 VA |
| Display | 4.3" (10.9 cm) 480 × 272 pixels TFT colour |
| Communication | Bluetooth, USB and RS-232 |
| Degree of protection | IP 65 (case closed) / IP 40 (case open) |
| Measuring category | 1000 V CAT IV |
| Dimensions / weight | 36 cm x 16 cm x 33 cm / 6.3 kg, without accessories |
| MI 3215 Standard set | Instrument MI 3215; TeraOhmHP 15 kV; A 1794 3M; HV test lead, 3m, Black banana plug/Crocodile clip - Shielded; A 1795 3M; HV test lead, 3m, Blue banana plug/Crocodile clip; A 1793 3M; HV test lead, 3m, Red banana plug/Crocodile clip; Power cable, 2m, 3x0.75mm2, IEC C13/Type E connector (A 1728); USB cable TypeA/B (A 1727); Soft carrying bag Size: XXL (A 1772); Metrel ES Manager BASIC Licence; Short form instruction manual; Calibration certificate |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Metrel MI 3121
Metrel MI 3121 SMARTEC Insulation / Continuity Tester
Handheld insulation and continuity tester for installations: 50 V to 1000 V test voltages up to 30 GΩ, 200 mA continuity with polarity reversal, 7 mA continuity, TRMS voltage and frequency; PASS / FAIL LEDs, magnetic holder.
-
Enquire about Metrel MI 3121H
Metrel MI 3121H SMARTEC 2.5 kV Insulation / Continuity Tester
Handheld 2.5 kV insulation and continuity tester: 100 V to 2500 V test voltages up to 99.9 GΩ, DAR and PI, 200 mA continuity with polarity reversal, 7 mA continuity and TRMS voltage.
-
Enquire about Metrel MI 3201
Metrel MI 3201 TeraOhm 5 kV Plus Insulation Tester
5 kV insulation tester measuring up to 10 TΩ with adjustable test voltage, leakage current, DAR, PI and dielectric discharge, capacitance, voltage and frequency; NiMH battery, CAT IV 600 V.
-
Enquire about Metrel MI 3202
Metrel MI 3202 GigaOhm 5 kV Insulation Tester
5 kV insulation tester with analogue / digital display: insulation resistance from 5 kΩ to 999 GΩ, adjustable test voltage up to 5500 V, AC / DC voltage and frequency; NiMH battery, CAT IV 600 V.
