Mean Well NSP-1600-24 Enclosed Switching Power Supply 24 V, 67 A, 1608 W
- Brand
- Mean Well
- Model number
- NSP-1600-24
- Category
- Industrial Power Supplies
Mean Well NSP-1600-24, an enclosed switching power supply from the NSP-1600 series for 90-264 V AC input, up to 91% efficient, for machines, control panels and LED systems.
Price and availability on request
Key features
- 90~264Vac input with PFC
- Output voltage 40~125% programmable (15~125% by request)
- Built-in CANBus protocol
- 20~+70℃ wide range operation temperature
- Built-in constant current limiting circuit
- High efficiency up to 92.5%
- Built-in remote ON-OFF control / Remote Sense / 12Vaux power / DC OK signal / OTP alarm signal
- Built-in intelligent fan speed control
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Design refer to SEMl F47 at 200Vac
- 5 years warranty
Specifications
| DC voltage | 24V |
|---|---|
| Rated current | 67A |
| Current range | 0 ~ 67A |
| Rated power | 1608W |
| Ripple & noise (max.) | 200mVp-p |
| Voltage adj. range | 23.5 ~ 30V |
| Voltage tolerance | ±1.0% |
| Line regulation | ±0.5% |
| Load regulation | ±0.5% |
| Setup, rise time | 1500ms, 60ms/230Vac at full load |
| Hold up time (typ.) | 16ms / 230Vac at 70% load 10ms / 230Vac at full load |
| Voltage range | 90 ~ 264Vac 250 ~ 400Vdc |
|---|---|
| Frequency range | 47 ~ 63Hz |
| Power factor (typ.) | 0.97/230Vac at full load |
| Efficiency (typ.) | 91% |
| AC current (typ.) | 14A/115Vac 8A/230Vac 15A/115Vac 8.5A/230Vac |
| Inrush current (typ.) | COLD START 35A/230Vac |
| Leakage current | <2mA / 230Vac |
| Overload | 105 ~ 115% rated output power; Protection type : Constant current limiting, unit will shut down o/p voltage after 5 sec. After O/P voltage falls, re-power on to recover |
|---|---|
| Over voltage | 31.5 ~ 37.5V; Protection type : Shut down o/p voltage, re-power on to recover |
| Over temperature | Shut down o/p voltage, recovers automatically after temperature goes down |
| Voltage programmable(PV) | Adjustment of output voltage is allowable to 40 ~ 125%(12V: 60~125%) of nominal output voltage ; 15~125% by request.; Please refer to the Function Manual. |
|---|---|
| Remote control | By electrical signal or dry contact Power ON:short Power OFF:open. Please refer to the Function Manual |
| Remote sense | Compensate voltage drop on the load wiring up to 0.5Vdc. Please refer to the Function Manual |
| Auxiliary power | 12Vaux @ 0.8A |
| Alarm signal | Isolated signal output for T-alarm and DC OK |
| Working temp. | -20 ~ +70℃ (Refer to "Derating Curve") |
|---|---|
| Working humidity | 20 ~ 90% RH non-condensing |
| Storage temp., humidity | -40 ~ +85℃, 10 ~ 95% RH non-condensing |
| Temp. coefficient | ±0.03%/℃ (0 ~ 50℃) |
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes |
| Safety standards | UL62368-1, CAN/CSA C22.2 No. 62368-1, TUV BS EN/EN62368-1, BSMI CNS15598-1,; BIS IS 13252(Part 1):2010/ IEC 60950-1 : 2005 (except for 48V), AS/NZS62368.1, EAC TP TC 004 approved |
|---|---|
| Withstand voltage | I/P-O/P:3KVac I/P-FG:2KVac O/P-FG:1.5KVac |
| MTBF | 684.7K hrs min. Telcordia SR-332 (Bellcore) ; 69.2K hrs min. MIL-HDBK-217F (25℃) |
|---|---|
| Dimension | 300*85*41mm (L*W*H) |
| Packing | 1.8Kg;6pcs/11.3Kg/1.25CUFT |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
