| Circuit | Custom one-chip of microprocessor LSI circuit. |
|---|
| Display | LCD size : 50 mm x 30 mm; LCD with green backlight ( ON/OFF ). |
|---|
| Measurement Type | SPL : Sound pressure level; Dose: test noise exposure |
|---|
| Measurement Range | SPL: Auto 30 - 130 dB.; Dose: 70~130dB |
|---|
| Resolution | 0.1 dB. |
|---|
| Function | dB ( A & C frequency weighting ); Time weighting ( Fast, Slow ); Data hold; Record ( Max., Min. ). |
|---|
| Accuracy | Characteristics of " A " frequency weighting network meet IEC 61672-1-2013 class 2.; Under 94 dB input signal, the accuracy are : Remark : The above spec. are tested under the environment RF Field Strength less than 3 V/M & frequency less than 30 MHz only. |
|---|
| Frequency Weighting Network | Characteristics of A & C.; A weighting : The characteristic is simulated as "Human Ear Listening" response. Typical, if making the environmental sound level measurement, always select to A weighting.; C weighting; The characteristic is near the "FLAT" response. Typical, it is suitable checking the noise of machinery (Q.C. check) & knowing the sound pressure level of the tested equipment. |
|---|
| Data hold | To freeze the measurement value. |
|---|
| Frequency | 31.5 to 8,000 Hz |
|---|
| Microphone type | Electric condenser microphone |
|---|
| Microphone size | Out size, 12.7 mm DIA. ( 1/2 inch) |
|---|
| Calibration VR | Build in external calibration VR, easy to calibrate on 94 dB level by screw driver. * Calibrated via external SOUND CALIBRATOR ( SC-942, optional ). |
|---|
| Calibrator | B & K (Bruel & kjaer), MULTIFUNCTION ACOUSTIC CALIBRATOR Type 4226 |
|---|
| Datalogger Sampling Time Setting range | Auto : 1 second to 3600 seconds; @Sampling time can set to 1 second, but memory data may loss; Manual : Push the data logger button once will save data one time.; @Set the sampling time to 0 second |
|---|
| Memory device | internal memory device : EEPROM can be record 16,000 items.; external memory device : SD memory card. 1 GB to 16 GB. |
|---|
| Data error no. | ≤ 0.1% no. of total saved data typically. |
|---|
| Advanced setting | * Set clock time ( Year / Month / Date,Hour / Minute / Second ); * Set sampling time; * Auto power OFF management; * Set beep Sound ON/OFF; * Decimal point of SD card setting; * SD memory card Format; * Frequency weighting to A or C setting |
|---|
| Over Indication | Show " - - - - " |
|---|
| Data Hold | Freeze the display reading. |
|---|
| Memory Recall | Maximum & Minimum value. |
|---|
| Sampling Time of Display | Approx. 1 second. |
|---|
| Data Output | RS 232/USB PC computer interface.; * Connect the optional RS232 cable; UPCB-02 will get the RS232 plug.; * Connect the optional USB cable; USB-01 will get the USB plug. |
|---|
| Power off | Auto shut off (Approx. 10 Minutes) saves battery life ormanual off by push button. |
|---|
| Operating Temperature | 0 to 50 °C. |
|---|
| Operating Humidity | Less than 85% R.H. |
|---|
| Power Supply | * Alkaline or heavy duty DC 1.5 V battery( UM4, AAA ) x 6 PCs, or equivalent.; * DC 9V adapter input. |
|---|
| Power Current | Normal operation ( w/o SD card save data and LCD Backlight is OFF) : Approx. DC 16 mA.; When " SD " save the data but and LCD Backlight is OFF) : Approx. DC 35 mA.; * If LCD backlight on, the power consumption will increase approx. 3 mA. |
|---|
| Weight | 220 g/ 0.48 LB. (without battery) |