Lutron DM-9972SD Bench LCR Meter and Multimeter, SD Card Logger

Brand
Lutron
Model number
DM-9972SD

Bench instrument combining a 6000-count multimeter and LCR meter, with isolated RS232 output and SD card data logging.

Price and availability on request

Request a quote

Sent with the product details: Lutron DM-9972SD Bench LCR Meter and Multimeter, SD Card Logger.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • High Accuracy and Resolution: Features 6000 counts A/D with high resolution and multiple measurement functions including DCV, ACV, DCA, ACA, resistance, frequency, duty cycle, diode, and continuity beeper.
  • Multi-Function Capability: Functions as both a multimeter and an LCR meter, supporting Z/DCR measurement with four different test frequencies available: 100 Hz, 120 Hz, 1 kHz, and 10 kHz.
  • Comprehensive Connectivity: Includes a photo-coupled RS232 computer serial interface and optional data acquisition software for enhanced data analysis and reporting capabilities.

Specifications

Specifications
Display97 mm x 56 mm large LCD display
MeasurementDCV, ACV, DCA, ACA, Resistance,Diode, Continuity beeper, Frequency, Duty cycle.
Datalogger Sampling Time Setting rangeAuto; 2 seconds to 3600 seconds; Manual; Push the data logger button once will save data one time.; @Set the sampling time to 0 seconds.
Data error no.≤ 0.1% no. of total saved data typically.
SD card capacity4 GB to 32 GB
A/D counts no.6000 counts.
Range selectionAuto range with manual range selecting.
Special functionRelative measurement, Data hold
Data holdTo freeze the display reading on the LCD display.
Power On/Off managementAuto power of or manual power off.
Memory recallRecords Maximum & Minimum readings with recall.
Relative measurementTo offset the measurement value.
V/A/Hz buttonWhen execute the voltage or current function also can measure the frequency of signal.
Data outputRS 232 PC serial interface, photo couple.
PolarityAutomatic Switching, " - " indicates negative polarity.
Zero adjustmentAutomatic.
Sampling time of displayApprox. 0.5 to 1 second.
Operating Temperature0 °C to 50 °C (32 °F to 122 °F)
Operating HumidityMax. 80% RH.
Power supplyDC1.5 V (AA) battery x 6 PCs or DC 9V adapter input * AC/DC Power adapter is optional.
Power consumptionNormal operation (w/o SD card save data) : Approx. DC 80 mA; When SD card save the data : Will increase approx. DC 25 mA.
Dimension292 x 236 x 100 mm ( 11.5 x 9.3 x 3.9 inch ).
Weight1450 g/3.19 LB ( w.o battery ).
Accessories
Supplied withRed and Black Test Leads ( CAT III 1KV Test Leads ):1 Set; 630 mA Spare Fuse:1 PC; Instruction Manual: 1 PC
OptionalFull line adapters : ACA/DCA current adapter, Tachometer adapter, Humidity adapter, Pressure adapter, Light adapter, EMF adapter, Light adapter, EMF adapter; AC to DC 9V Adaptre : AP-9VA; RS232 cable to D-Sub 9 connector :UPCB-06 RS232 cable to USB connector:USB-11; SD card: SD-4GB; Data Acquisition software:SW-U801-WIN; SW-E802
Measurement Functions
Range600.0 mV, 6 V, 60 V, 600 V, 1000 V
Resolution0.1 mV, 0.001 V, 0.01 V, 0.1 V, 1 V
Accuracy600 mV ±⁠(0.5% + 2d), other ranges ±⁠(0.8% + 1d)
Range600 uA, 6000 uA, 60 mA, 600 mA, 6 A, 10 A
Resolution0.1 uA, 1 uA, 0.01 mA, 0.1 mA, 0.001 A, 0.01 A
AccuracyDCA ±⁠(0.5% + 2d), ACA ±⁠(1% + 7d)
Range600.0 Ω, 6.000 KΩ, 60.00 KΩ, 600.0 KΩ, 6.000 MΩ, 60.00 MΩ
Resolution0.1 Ω, 0.001 KΩ, 0.01 KΩ, 0.1 KΩ, 0.001 MΩ, 0.01 MΩ
Accuracy±⁠(1.0% + 5d)
Range600.0 pF, 6.000 nF, 60.00 nF, 600.0 nF, 6.000 µF, 60.00 µF, 600.0 µF, 6.000 mF, 10.00 mF
Resolution0.1 pF, 1 pF, 0.01 nF, 0.1 nF, 1 nF, 0.01 µF, 0.1 µF, 0.01 mF
Accuracy±⁠(2.0% + 5d)
Range60 Hz, 600 Hz, 6 kHz, 60 kHz, 600 kHz, 6 MHz, 20 MHz
Resolution0.01 Hz, 0.1 Hz, 0.001 kHz, 0.01 kHz, 0.1 kHz, 0.001 MHz, 0.01 MHz

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.