HTC Instruments PDO-50200S Digital Storage Oscilloscope
- Brand
- HTC Instruments
- Model number
- PDO-50200S
2-channel 200 MHz digital storage oscilloscope, 1 GSa/s real-time sampling, 7-inch wide screen, 5000 wfms/s capture rate, FFT, waveform record and replay, USB storage.
Price and availability on request
Key features
- Bandwidth 200 MHz, real-time sampling 1 GSa/s
- 2 channels, wide vertical range 1 mV/div – 20 V/div
- 7-inch wide-screen LCD
- Plug-and-play USB storage; software upgrade by USB drive
- Stores waveforms, setups and screen images
- Waveform record and replay
- Portable
- Square wave output at 10 Hz, 100 Hz, 1 kHz and 10 kHz
- Parameter measurement and waveform recording
- 5000 wfms/s waveform capture rate
- Automatic waveform and state setting
- Automatic cursor tracking measurement
- Built-in FFT
Specifications
| Channels | 2 |
|---|---|
| Bandwidth | 200 MHz |
| Real-time sampling rate | 1 GSa/s |
| Vertical range | 1 mV/div – 20 V/div |
| Waveform capture rate | 5000 wfms/s |
| Trigger sensitivity | < 1 div |
|---|---|
| Trigger level range | Internal: ±5 div from screen centre; EXT: ±3 V; EXT/5: ±15 V |
| Pre-trigger | Normal mode / scanning mode, pre-trigger / delay with adjustable pre-trigger depth |
| Holdoff range | 100 ns – 1.5 s |
| Set level to 50% (typical) | Works when the input signal frequency is at least 50 Hz |
| Edge trigger | Rising, falling, rising and falling |
| Pulse width trigger | Greater than, less than or equal to the positive / negative pulse width, 20 ns – 10 s |
| Cursor, manual mode | Voltage difference (ΔV) and time difference (ΔT) between cursors; reciprocal of ΔT (1/ΔT) |
|---|---|
| Cursor, tracing mode | Voltage and time of a waveform point; the cursor can be shown during automatic measurement |
| Automatic measurement | Peak value, amplitude, maximum, minimum, top value, bottom value, middle value, average, root-mean-square, overshoot, preshoot, frequency, cycle, rise time, fall time, positive pulse width, negative pulse width, positive duty cycle, negative duty cycle and delay |
| Maths functions | +, −, ×, ÷ |
| Waveform storage | 20 groups of waveforms and 20 setups |
| FFT | Window: Hanning, Hamming, Blackman, rectangle; 1024 sampling points |
| Lissajous figure | Phase difference ±3° |
| Reading resolution | 6 digits |
|---|---|
| Trigger sensitivity | < 30 V rms |
| Precision (typical) | ±51 ppm + 1 count |
| Supply | 100 – 240 V AC rms, 45 – 440 Hz, CAT II |
|---|---|
| Power consumption | Less than 30 VA |
| Fuse | F1.6AL, 250 V (on the power board inside the unit) |
| Display | 7-inch wide-screen LCD |
|---|---|
| Dimensions | W 320 × H 150 × D 130 mm |
| Weight | Net approx. 2.5 kg; gross approx. 4 kg |
| Accessories | 100 MHz probe × 2, USB charger, user manual |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about HTC Instruments DSO-1008S
HTC Instruments DSO-1008S Smart Oscilloscope Multimeter
3-in-1 handheld: 10 MHz, 48 MSa/s oscilloscope, 5999-count true RMS multimeter and non-contact voltage pen, with 2.8-inch colour screen and rechargeable lithium battery.
-
Enquire about HTC Instruments DSO-10100S
HTC Instruments DSO-10100S Digital Storage Oscilloscope
2-channel 100 MHz digital storage oscilloscope with 1 GSa/s real-time sampling, built-in DDS signal generator, 7-inch TFT display, 1 GB storage and USB.
-
Enquire about HTC Instruments DSO-20100S
HTC Instruments DSO-20100S Portable Touchscreen Oscilloscope
2-channel flat-panel oscilloscope with 7-inch touch screen, 100 MHz bandwidth (×10 probe), 1 GSa/s real-time sampling, FFT, 1 Gb storage and a 6000 mAh battery.
-
Enquire about HTC Instruments FG-2002
HTC Instruments FG-2002 Function Generator
DDS function generator, 0.1 Hz to 2 MHz: sine, triangle, square, sawtooth and pulse, at least 20 Vp-p into no load, with TTL / CMOS output, VCF input and a 1 Hz – 20 MHz counter.
