HTC Instruments DSO-10100S Digital Storage Oscilloscope
- Brand
- HTC Instruments
- Model number
- DSO-10100S
2-channel 100 MHz digital storage oscilloscope with 1 GSa/s real-time sampling, built-in DDS signal generator, 7-inch TFT display, 1 GB storage and USB.
Price and availability on request
Key features
- 2-channel input
- 100 MHz analog bandwidth
- 1 GSa/s real-time sampling
- 7-inch TFT LCD
- Built-in DDS function signal generator
- Spectrum analysis of the signal
- Intelligent anti-burn protection
- Built-in 1 GB storage
- Adjustable screen brightness and background grid
- USB interface to transfer, save and analyse
- Measures Vpp, Vpeak, max, min, average, frequency, duty cycle, time and period
- Intelligent decoding algorithm
Specifications
| Channels | 2 |
|---|---|
| Bandwidth | 100 MHz |
| Real-time sampling rate | 1 GSa/s |
| Vertical sensitivity | 50 mV/div – 500 V/div |
| Time base range | 10 ns/div – 50 s/div |
| Coupling | AC / DC |
| Maximum input voltage | 40 V (×1 probe), 400 V (×10 probe) |
| Trigger level range | Normal: ±5 div from screen centre; EXT: ±3 V; EXT/5: ±15 V |
|---|---|
| Trigger mode | Single, normal, auto |
| Trigger edge | Rising edge / falling edge |
| Cursor, manual mode | Voltage difference (ΔV) and time difference (ΔT) between cursors; reciprocal of ΔT (1/ΔT) |
|---|---|
| Cursor, tracing mode | Voltage and time of a waveform point; the cursor can be shown during automatic measurement |
| Automatic measurement | Peak value, amplitude, maximum, minimum, top value, bottom value, average, root-mean-square, frequency, cycle, rise time, fall time, positive pulse width, negative pulse width, positive duty cycle, negative duty cycle |
| Maths functions | +, −, ×, ÷ |
| Waveform storage | Built-in 1 GB: up to 1000 screen pictures and 1000 groups of waveform data |
| Lissajous figure | Phase difference ±3° |
| Reading resolution | 6 digits |
|---|---|
| Trigger sensitivity | < 30 V rms |
| Precision (typical) | ±51 ppm + 1 count |
| LCD | 7-inch TFT |
|---|
| Supply | 100 – 240 V AC rms, 45 – 440 Hz, CAT II |
|---|---|
| Power consumption | Less than 30 VA |
| Fuse | F1.6AL, 250 V (on the power board inside the unit) |
| Dimensions | W 310 × H 145 × D 70 mm |
|---|---|
| Accessories | 100 MHz probe × 2, USB charger, user manual |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about HTC Instruments DSO-1008S
HTC Instruments DSO-1008S Smart Oscilloscope Multimeter
3-in-1 handheld: 10 MHz, 48 MSa/s oscilloscope, 5999-count true RMS multimeter and non-contact voltage pen, with 2.8-inch colour screen and rechargeable lithium battery.
-
Enquire about HTC Instruments DSO-20100S
HTC Instruments DSO-20100S Portable Touchscreen Oscilloscope
2-channel flat-panel oscilloscope with 7-inch touch screen, 100 MHz bandwidth (×10 probe), 1 GSa/s real-time sampling, FFT, 1 Gb storage and a 6000 mAh battery.
-
Enquire about HTC Instruments FG-2002
HTC Instruments FG-2002 Function Generator
DDS function generator, 0.1 Hz to 2 MHz: sine, triangle, square, sawtooth and pulse, at least 20 Vp-p into no load, with TTL / CMOS output, VCF input and a 1 Hz – 20 MHz counter.
-
Enquire about HTC Instruments FG-2010
HTC Instruments FG-2010 Function Generator
DDS function generator, 0.1 Hz to 10 MHz: sine, triangle, square, sawtooth and pulse, at least 20 Vp-p into no load, with TTL / CMOS output, VCF input and a 1 Hz – 20 MHz counter.
