HTC Instruments CM-2061PV 2000 A AC/DC True RMS Solar PV Clamp Meter
- Brand
- HTC Instruments
- Model number
- CM-2061PV
- Category
- AC/DC Clamp Meters
True RMS AC/DC clamp meter for solar PV work: 2000 A AC/DC current, 2000 V AC/DC voltage, 67 mm jaw, inrush current, LoZ, NCV and live-wire detection. CAT III 1500 V / CAT IV 1000 V.
Price and availability on request
Key features
- 5,999 counts
- True RMS
- AC and DC current to 2000 A, Hall-effect sensor
- AC and DC voltage to 2000 V
- Jaw size 67 mm
- Inrush current measurement
- LoZ (low-impedance) measurement
- Peak voltage measurement
- Max / min / relative function
- Duty cycle
- Non-contact voltage (NCV) and live wire detection
- Temperature (°C / °F) with K-type thermocouple
- Large LCD with big font size
- Both auto and manual range
- Full overload protection
- Backlight and flashlight
- Auto power off after 15 minutes (can be disabled)
- Supplied with MC4 PV plug
Specifications
| Ranges (resolution) | 60 A (0.01 A), 600 A (0.1 A), 2000 A (1 A) |
|---|---|
| Accuracy (DC and AC) | ±(2.0% + 5) |
| Overload protection | 2000 A (60 A and 600 A ranges) |
| Range (resolution) | 2000 A (1 A) |
|---|---|
| Accuracy | ±(10% + 10) |
| Measurement time | Around 100 ms |
| Ranges (resolution) | 600 mV (0.1 mV), 6 V (0.001 V), 60 V (0.01 V), 600 V (0.1 V), 2000 V (1 V) |
|---|---|
| DC accuracy | 600 mV: ±(0.8% + 3); 6 V – 600 V: ±(0.5% + 5); 2000 V: ±(1.0% + 8) |
| AC accuracy | 6 V – 600 V: ±(1.0% + 5); 2000 V: ±(1.0% + 8); no AC 600 mV range |
| Overload protection | 2000 V AC/DC |
| Range (resolution) | 1000 V (1 V) |
|---|---|
| Accuracy | ±(2.0% + 5) |
| Function | Identifies AC and DC voltage automatically; internal resistance approx. 1.8 MΩ |
| Overload protection | 1000 V DC / AC |
| Ranges (resolution) | 600 Ω (0.1 Ω), 6 kΩ (0.001 kΩ), 60 kΩ (0.01 kΩ), 600 kΩ (0.1 kΩ), 6 MΩ (0.001 MΩ), 60 MΩ (0.01 MΩ) |
|---|---|
| Accuracy | 600 Ω: ±(1.0% + 3); 6 kΩ – 600 kΩ: ±(1.0% + 2); 6 MΩ – 60 MΩ: ±(2.0% + 8) |
| Overload protection | 600 V DC/AC |
| Ranges (resolution) | 1.0 nF (0.001 nF), 10.0 nF (0.01 nF), 100.0 nF (0.1 nF), 1.0 µF (0.001 µF), 10.0 µF (0.01 µF), 100.0 µF (0.1 µF), 1.0 mF (0.001 mF), 10.0 mF (0.01 mF), 100.0 mF (0.1 mF) |
|---|---|
| Accuracy | 1 nF – 10 nF: ±(4.0% + 25); 100 nF – 100 µF: ±(4.0% + 5); 1 mF – 100 mF: ±(10.0% + 9) |
| Overload protection | 600 V DC/AC |
| Frequency | 1 Hz – 10 MHz (0.001 Hz – 1 kHz), ±(1.0% + 3) |
|---|---|
| Duty cycle | 10.0 – 90.0% (0.1%), ±(2.6% + 7) |
| Overload protection | 600 V DC/AC |
| °C (resolution 1 °C) | −40 to 0 °C: ±4 °C; 0 to 400 °C: ±(2% + 3); 400 to 1300 °C: ±(3% + 3) |
|---|---|
| °F (resolution 1 °F) | −40 to 50 °F: ±5 °F |
| Sensor | K-type thermocouple |
| Overload protection | 600 V DC/AC |
| Continuity (600 Ω, 0.1 Ω) | Continuous beep below 50 Ω; no beep above 50 Ω; overload protection 600 V AC/DC |
|---|---|
| Diode (6 V, 0.001 V) | Open-circuit voltage about 3 V; measures forward voltage drop up to 3 V (a silicon PN junction normally reads about 0.5 – 0.8 V); overload protection 600 V AC/DC |
| NCV | Hold the sensor near a wire: "EF" when no voltage; the red light flashes and the buzzer sounds faster as the voltage gets stronger. Overload protection 1000 V DC/AC |
|---|---|
| Live wire (LIVE) | Touch the wire with the test lead tip: "LIUE" when no voltage; when voltage is detected the display shows a bar, the red light flashes and the buzzer sounds. Overload protection 1000 V DC/AC |
| Jaw opening | 67 mm |
|---|---|
| Jaw internal size | 74.1 (L) × 56.7 (W) mm |
| Largest conductor | Ø 57 mm (copper bar 16 × 74 mm) |
| Sensor | Hall effect |
| Position error | ±1.0% additional error if the conductor is not centred in the jaws |
| LCD size | 45 × 39 mm |
| Polarity | Automatic |
| Sampling rate | 3 times per second |
| Safety category | CAT III 1500 V / CAT IV 1000 V |
| Power | 3 × 1.5 V AAA |
| Dimensions | H 283 × W 110 × D 45 mm |
| Weight | Approx. 610 g |
| Accessories | Test leads, user manual, K-type thermocouple, hard carrying bag, battery, test probe, crocodile clips and MC4 PV plug |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about HTC Instruments 21S
HTC Instruments 21S Smart AC/DC Clamp Meter
Smart true RMS AC/DC clamp meter, 600 A, with colour display, 5,999 counts, auto mode, NCV, live-wire detection, capacitance, frequency/duty cycle and temperature. CAT III 600 V.
-
Enquire about HTC Instruments CL-2053
HTC Instruments CL-2053 Mini AC/DC Clamp Meter
Mini true RMS AC/DC clamp meter to 100 A with a 17 mm jaw, VFC mode for variable-frequency drives, zero/relative mode, NCV and capacitance to 20 mF. CAT III 300 V.
-
Enquire about HTC Instruments CL-2055
HTC Instruments CL-2055 AC/DC Digital Clamp Meter
Compact true RMS AC/DC clamp meter with a slim 12.5 mm jaw and 1 mA resolution on the 10 A range, 9,999-count display, peak hold and long battery life. CAT III 300 V.
-
Enquire about HTC Instruments CM-2016
HTC Instruments CM-2016 800 A AC/DC Digital Clamp Meter
True RMS AC/DC clamp meter to 800 A, 5,999 counts, with 28 mm jaw and jaw light, NCV, relative mode, duty cycle, capacitance, frequency to 10 MHz and temperature. CAT II 600 V.
