54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Fluke 113 Digital Multimeter with VCHEK

Fluke 113 Digital Multimeter with VCHEK

Brand
Fluke
Model number
113

Basic utility multimeter with VCHEK low-impedance voltage/continuity function, large backlit display, CAT IV 600 V.

Price and availability on request

Request a quote

Sent with the product details: Fluke 113 Digital Multimeter with VCHEK.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • VCHEK LoZ low impedance measurement function to test for either AC or DC voltage, or show continuity if voltage is not detected
  • Large backlit display
  • CAT IV 600 V safety rated

Specifications

Specifications
VCHEK1 2 3, Range6.000 V; 60.00 V; 600.0 V
VCHEK1 2 3, Resolution0.001 V; 0.01 V/ 0.1 V
VCHEK1 2 3, AccuracyDC, 45 to 500 Hz: 2.0% + 3 / 500 Hz to 1 kHz: 4.0% + 3
Diode test, Range2.000 V
Diode test, Resolution0.001 V
Diode test, Accuracy2.0% + 3
Continuity, AccuracyBeeper on < 20 Ω, off > 250 Ω detects opens or shorts of 500 μs or longer
Ω4, Range600.0 Ω; 6.000 kΩ; 60.00 kΩ
Ω4, Resolution0.1 Ω; 0.001 kΩ; 0.01 kΩ
Ω4, Accuracy0.9% + 2 / 0.9% + 1 / 0.9% + 1
Capacitance, Range1000 nF; 10.00 μF; 100.0 μF; 9999 μF
Capacitance, Resolution1 nF; 0.01 μF; 0.1 μF; 1 μF
Capacitance, Accuracy1.9% + 2 / 100 μF - 1000 μF: 1.9% + 2 / 1000 μF: 5% + 20
Maximum voltage between any terminal and earth ground600 V
Display3 3/4-digits, 6000 counts, updates 4/sec
Operating temperature-10°C to 50°C (14°F to 122°F)
Storage temperature-40°C to 60°C (-22°F to 140°F)
Temperature coefficient0.1 x (specified accuracy); °C (< 18°C or > 28°C)
Operating altitude2,000 m
Storage altitude10,000 m
Relative humidity95% to 30°C; 75% to 40°C; 45% to 50°C
Battery type9 Volt Alkaline, IEC 6F22
Battery lifeAlkaline: 300 hours typical, without backlight
Size (H x W x L)167.1 x 85.1 x 46.0 mm (6.58 x 3.35 x 1.81 in)
Weight13.0 oz (404 g)
SafetyIEC 61010-1: Pollution Degree 2; IEC 61010-2-033: CAT IV 600V
VCHEK, Input impedance (nominal)~3 kΩ < 300 pF
VCHEK, Common mode rejection ratio (1 kΩ unbalanced)> 60 dB at DC, 50 or 60 Hz
Ω, Open circuit test voltage< 2.7 VDC
Ω, Full scale voltage< 0.7 VDC
Diode test, Open circuit test voltage2.7 VDC
Diode test, Full scale voltage2.000 VDC
Ω, Short circuit current< 350 μA
Diode test, Short circuit current< 1.0 mA
Supplied with
ContentsFluke TL75 test leads; Holster; Users manual; and 9 V battery (installed)

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

About the 113

The Fluke 113 is a straightforward meter for basic electrical testing by utility workers, linemen and electricians. Its VCHEK low-impedance mode checks for AC or DC voltage and shows continuity when no voltage is present. It has a large backlit display, an integrated holster with probe holders and a CAT IV 600 V rating.

Related products