Autonics FX8M-1P4 Digital Counter / Timer FX8M-1P4
Autonics FX8M-1P4 digital counter / timer (FXM / FXH Series): 100 - 240 VAC 50 / 60 Hz supply, IP20 (front part, IEC standard). Order code note: 100-240VAC.
Price and availability on request
Key features
- Counting speeds: 1 cps / 30 cps / 2 kcps / 5kcps
- Switch between counter and timer operation using DIP switch
- No-voltage input (NPN) using DIP switch
- Operation modes: count-up, count-down, count-up / down
- Set decimal point, hr / min / sec display with RESET key [Counter]
- 20 input modes, 18 output modes [Timer]
- Various output modes (16 output modes)
- Various time setting ranges:; 8-digit models: 0.01 sec to 99999 hr 59.9 min; 6-digit models: 0.1 sec to 99999.9 hr; 4-digit models: 0.01 sec to 9999 hr
- Output model types: single preset, dual preset, indicator only
- Power supply: 100 - 240 VAC 50 / 60 Hz
Specifications
| Series | FXM / FXH Series |
|---|---|
| Order code description | 100-240VAC |
| Catalogue model group | FX8M-□4□ |
| Display digits | 8-digit |
|---|---|
| Character size | W 3.8 × H 7.6 mm |
| Max. counting speed | 1 / 30 / 2 k / 5 k cps |
| Return time | ≤ 500 ms |
| Min. signal width | INHIBIT, RESET: ≈ 20 ms |
| Input logic | Voltage input (PNP) - input impedance: ≤ 10.8 kΩ, [H]: 5 - 30 VDC , [L]: 0 - 2 VDC No-voltage input (NPN) - s hort-circuit impedance: ≤ 470 Ω, short- circuit residual vo ltage: ≤ 1 VDC open-circuit impedance: ≥ 100 kΩ |
| One-shot output time | , Dependent on the output; 1-stage setting: 0.05 to 5 sec; 2-stage setting: OUT1: 0.5 sec fixed, OUT2: 0.05 to 5 sec |
| Error | Repeat / SET / voltage / Temp.: ≤ ± 0.01 % ± 0.05 s |
| Contact control output | Relay |
| Type (1-stage) | Instantaneous SPDT (1c) × 1 |
| Type (2-stage) | Instantaneous SPDT (1c) × 2 |
| Capacity | 250 VAC 3 A, 30 VDC 3 A resistive load ; ≤ 30 VDC , 100 mA, residual voltage: ≤ 1 VDC |
| Solid-state control output | NPN open collector |
| Unit weight (packaged) | 1-stage setting: ≈ 180 g (≈ 245 g), 2-stage setting: ≈ 200 g (≈ 265 g), Indicator: ≈ 160 g(≈ 225 g) |
| Power supply | 100 - 240 VAC 50 / 60 Hz |
| Permissible voltage range | 90 to 110 % of rated voltage |
| Power consumption | Dependent on the output; 1-stage setting: ≤ 4.6 VA; 2-stage setting: ≤ 5.8 VA |
| Indicator | ≤ 3.8 VA |
| External supply power | ≤ 12 VDC ± 10 % 50 mA |
| Memory retention | ≈ 10 years (non-volatile semiconductor memory type) |
| Insulation resistance | ≥ 100 MΩ (500 VDC megger) |
| Dielectric strength | Between the charging part and the case: 3,000 VAC 50 / 60 Hz for 1 min |
| Noise immunity | ± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Vibration | 0.75 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 1 hour |
| Vibration (malfunction) | 0.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 10 minute |
| Shock | 300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
| Shock (malfunction) | 100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
| Relay life cycle | Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VAC 3 A resistive load) |
| Ambient temperature | -10 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP20 (front part, IEC standard) |
| Sold separately | Terminal protection cover: RMA / RHA-COVER Not supported for 2-stage setting models |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics CM6M-30B2
Autonics CM6M-30B2 30-Channel Counter CM6M-30B2
Autonics CM6M-30B2 30-Channel counter (CM6M Series): 24 VDC supply, IP54 (front part, IEC standard). Order code note: (N)24VDC.
-
Enquire about Autonics CT4S-1P2
Autonics CT4S-1P2 Programmable Digital Counter / Timer CT4S-1P2
Autonics CT4S-1P2 programmable digital counter / timer (CT Series): 100 - 240 VAC 50 / 60 Hz supply, IP65 (front part, IEC standard). Order code note: 24-48VDC/24VAC(A).
-
Enquire about Autonics CT4S-1P4
Autonics CT4S-1P4 Programmable Digital Counter / Timer CT4S-1P4
Autonics CT4S-1P4 programmable digital counter / timer (CT Series): 100 - 240 VAC 50 / 60 Hz supply, IP65 (front part, IEC standard). Order code note: 100-240VAC(ENG).
-
Enquire about Autonics CT4S-1P4T
Autonics CT4S-1P4T Programmable Digital Counter / Timer CT4S-1P4T
Autonics CT4S-1P4T programmable digital counter / timer (CT Series): 100 - 240 VAC 50 / 60 Hz supply, IP65 (front part, IEC standard). Order code note: 100-240VAC(A).
