Autonics FX4S-1P2 Digital Counter / Timer FX4S-1P2
Autonics FX4S-1P2 digital counter / timer (FXS Series): 100 - 240 VAC 50 / 60 Hz supply, IP20 (front part, IEC standard). Order code note: 24-48VDC/24VAC.
Price and availability on request
Key features
- Counting speed: 1 cps / 30 cps / 2 kcps / 5 kcps
- Selectable voltage input (PNP) or no-voltage input (NPN)
- Input mode: Up, Down, Up / Down
- Dot for Decimal Point, Hour / Min / Second by RESET key
- Wide range of input power supply : 100 - 240 VAC 50 / 60 Hz, 24 VAC 50 / 60 Hz, 24 - 48 VDC universal
- Selectable Counter / Timer by DIP switch [Counter]
- 20 input modes / 18 output modes [Timer]
- 16 output modes
- Various time setting range; 5-digit model: 0.01 sec to 9999.9 hour; 4-digit model: 0.01 sec to 9999 hour
- Output: indicator, 1-stage setting
Specifications
| Series | FXS Series |
|---|---|
| Order code description | 24-48VDC/24VAC |
| Catalogue model group | FX4S-1P□ |
| Display digits | 4-digit |
|---|---|
| Character size | W 3.8 × H 7.6 mm |
| Max. counting speed | 1 / 30 / 2 k / 5 kcps |
| Return time | ≤ 500 ms |
| Min. signal width | INHIBIT, RESET: ≈ 20 ms |
| Input logic | Voltage input (PNP) - input impedance: ≤ 10.8 kΩ, [H]: 5 - 30 VDC , [L]: 0 - 2 VDC No-voltage input (NPN) - s hort-circuit impedance: ≤ 470 Ω, short-circuit residual voltage: ≤ 1 VDC open-circuit impedance: ≥ 100 kΩ |
| One-shot output time | 0.05 to 5 sec |
| Error | Repeat / SET / voltage / Temp.: ≤ ± 0.01 % ± 0.05 s |
| Contact control output | Relay |
| Type | Instantaneous SPDT (1c) × 1 |
| Capacity | 250 VAC 3 A, 30 VDC 3 A resistive load ; ≤ 30 VDC , 100 mA |
| Solid-state control output | NPN open collector × 1 |
| Unit weight (packaged) | ≈ 110 g (≈ 171 g) |
| Voltage type | AC voltage |
| Power supply | 100 - 240 VAC 50 / 60 Hz |
| Permissible voltage range | 90 to 110 % of rated voltage |
| Power consumption (FX4S-1P ) | ≤ 4.6 VA |
| Power consumption (FX5S-I ) | ≤ 3.8 VA |
| External supply power | ≤ 12 VDC ± 10 % 50 mA |
| Memory retention | ≈ 10 years (non-volatile semiconductor memory type) |
| Insulation resistance | ≥ 100 MΩ (500 VDC megger) |
| Dielectric strength | Between the charging part and the case: 3,000 VAC 50 / 60 Hz for 1 minute |
| Noise immunity | ± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Vibration | 0.75 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 1 hour |
| Vibration (malfunction) | 0.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 10 min |
| Shock | 300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
| Shock (malfunction) | 100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
| Relay life cycle | Mechanical: ≥ 5,000,000 operations Electrical: ≥ 100,000 operations (250 VAC 3 A resistive load) |
| Ambient temperature | -10 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP20 (front part, IEC standard) |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics CM6M-30B2
Autonics CM6M-30B2 30-Channel Counter CM6M-30B2
Autonics CM6M-30B2 30-Channel counter (CM6M Series): 24 VDC supply, IP54 (front part, IEC standard). Order code note: (N)24VDC.
-
Enquire about Autonics CT4S-1P2
Autonics CT4S-1P2 Programmable Digital Counter / Timer CT4S-1P2
Autonics CT4S-1P2 programmable digital counter / timer (CT Series): 100 - 240 VAC 50 / 60 Hz supply, IP65 (front part, IEC standard). Order code note: 24-48VDC/24VAC(A).
-
Enquire about Autonics CT4S-1P4
Autonics CT4S-1P4 Programmable Digital Counter / Timer CT4S-1P4
Autonics CT4S-1P4 programmable digital counter / timer (CT Series): 100 - 240 VAC 50 / 60 Hz supply, IP65 (front part, IEC standard). Order code note: 100-240VAC(ENG).
-
Enquire about Autonics CT4S-1P4T
Autonics CT4S-1P4T Programmable Digital Counter / Timer CT4S-1P4T
Autonics CT4S-1P4T programmable digital counter / timer (CT Series): 100 - 240 VAC 50 / 60 Hz supply, IP65 (front part, IEC standard). Order code note: 100-240VAC(A).
