Autonics CT6S-1P4 Programmable Digital Counter / Timer CT6S-1P4
Autonics CT6S-1P4 programmable digital counter / timer (CT Series): 100 - 240 VAC 50 / 60 Hz supply, IP65 (front part, IEC standard). Order code note: 100-240VAC(A).
Price and availability on request
Key features
- Communication function supported (communication model): RS485 (Modbus RTU)
- One-shot output time setting range: 0.01 sec to 99.99 sec by setting per 10ms [Counter]
- Prescale value setting range: 6-digit model: 0.00001 to 99999.9 / 4-digit model: 0.001 to 999.9
- Various input / output modes (9 input / 11 output modes)
- BATCH counter, count Start Point (counting initial value) setting function [Timer]
- Various output modes (13 modes)
- Various time setting range: 6-digit model: 0.001 sec to 99999.9 hour / 4-digit model: 0.001 sec to 9999 hour
- ‘0’ time setting function
- Selectable timer memory retention function for indicator model.
Specifications
| Series | CT Series |
|---|---|
| Order code description | 100-240VAC(A) |
| Display digits | 6-digit |
|---|---|
| Display method | 7-segment (counting value: red, setting value: green) LED |
| Character size | W × H (unit: mm) |
| Counting value | 4.5 × 10 |
| Setting value | 3.5 × 7 |
| Counter | Count up, count down, count up / down |
| Counting range | -99999 to 999999 |
| Timer | Count up, count down |
| Error | Repeat / SET / voltage / Temp. - Power ON Start: ≤ ± 0.01 % ± 0.05 sec Signal ON Start: ≤ ± 0.01 % ± 0.03 sec |
| Input logic | Voltage input (PNP) - input impedance: 5.4 kΩ, [H]: 5 - 30 VDC , [L]: 0 - 2 VDC No-voltage input (NPN) - s hort-circuit impedance: ≤ 1 kΩ, short-circuit residual voltage: ≤ 2 VDC |
| One-shot output time | 0.01 to 99.99 s |
| Product components | Product, instruction manual |
| Bracket | Mounted |
| Unit weight (packaged) | ≈ 159 g (≈ 212 g) |
| Contact control output | Relay |
| Type (1-stage) | SPDT (1c) × 1 ; Standard: × 1, Communication: - |
| Type (2-stage) | SPST (1a) × 2 ; Standard: × 1, Communication: - |
| Capacity | 250 VAC 5 A, 30 VDC 5 A resistive load ; ≤ 30 VDC , 100 mA |
| Solid-state control output | NPN open collector |
| Voltage | AC voltage type |
| Power supply | 100 - 240 VAC 50 / 60 Hz |
| Permissible voltage range | 90 to 110 % of rated voltage |
| Power consumption | ≤ 12 VA |
| External power supply | ≤ 12 VDC ± 10 % 100 mA |
| Memory retention | ≈ 10 years (non-volatile semiconductor memory type) |
| Insulation resistance | ≥ 100 MΩ (500 VDC megger) |
| Dielectric strength | Between the charging part and the case : 3,000 VAC 50 / 60 Hz for 1 minute |
| Noise immunity | ± 2 kV square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Vibration | 0.75 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 1 hour |
| Vibration (malfunction) | 0.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 10 min |
| Shock | 300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
| Shock (malfunction) | 100 m/s2 (≈ 10 G) in each X, Y, Z direction for 3 times |
| Relay life cycle | Mechanical: ≥ 1,000,000 operations, Electrical: ≥ 100,000 operations |
| Ambient temperature | -10 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP65 (front part, IEC standard) |
| Comm. protocol | Modbus RTU (16-bit CRC) |
| Sold separately | Terminal protection cover: M6P / M7P-COVER |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics CM6M-30B2
Autonics CM6M-30B2 30-Channel Counter CM6M-30B2
Autonics CM6M-30B2 30-Channel counter (CM6M Series): 24 VDC supply, IP54 (front part, IEC standard). Order code note: (N)24VDC.
-
Enquire about Autonics CT4S-1P2
Autonics CT4S-1P2 Programmable Digital Counter / Timer CT4S-1P2
Autonics CT4S-1P2 programmable digital counter / timer (CT Series): 100 - 240 VAC 50 / 60 Hz supply, IP65 (front part, IEC standard). Order code note: 24-48VDC/24VAC(A).
-
Enquire about Autonics CT4S-1P4
Autonics CT4S-1P4 Programmable Digital Counter / Timer CT4S-1P4
Autonics CT4S-1P4 programmable digital counter / timer (CT Series): 100 - 240 VAC 50 / 60 Hz supply, IP65 (front part, IEC standard). Order code note: 100-240VAC(ENG).
-
Enquire about Autonics CT4S-1P4T
Autonics CT4S-1P4T Programmable Digital Counter / Timer CT4S-1P4T
Autonics CT4S-1P4T programmable digital counter / timer (CT Series): 100 - 240 VAC 50 / 60 Hz supply, IP65 (front part, IEC standard). Order code note: 100-240VAC(A).
