Autonics BYS500-TDT1,2 Photoelectric Sensors with Synchronous Detection BYS500-TDT1,2
- Brand
- Autonics
- Model number
- BYS500-TDT1,2
- Category
- Photoelectric Sensors
Autonics BYS500-TDT1,2 photoelectric sensors with synchronous detection (BY Series): sensing distance 500 mm, Through-beam, NPN open collector output, ≤ 100 mA, IP50 (IEC standard). Order code note: V2_12~24VDC.
Price and availability on request
Key features
- Small size: W 12 × H 30 × L 16 mm
- Minimize malfunction by extraneous light by synchronizing emitter and receiver
- Reverse power protection circuit, output short overcurrent protection circuit
- Fast response speed: Max.1 ms
Specifications
| Series | BY Series |
|---|---|
| Order code description | V2_12~24VDC |
| Catalogue model group | BY□500-TDT□ |
| Sensing type | Through-beam |
|---|---|
| Sensing distance | 500 mm |
| Sensing target | Opaque materials |
| Min. sensing target | ≥ Ø 5 mm |
| Response time | ≤ 1 ms |
| Light source | Infrared |
| Peak emission wavelength | 940 nm |
| Operation mode | Dark ON mode |
| Indicator | Operation indicator (red) |
| Unit weight | ≈ 150 g |
| Power supply | 12-24 VDC ±10% (ripple P-P: ≤ 10%) |
| Current consumption | Emitter: ≤ 30 mA, receiver: ≤ 30 mA |
| Control output | NPN open collector output |
| Load voltage | ≤ 30 VDC |
| Load current | ≤ 100 mA |
| Residual voltage | ≤ 1 VDC |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | ±240 VDC the square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
| Ambient illuminance (receiver) | Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx |
| Ambient temperature | -10 to 60 ℃, storage: -25 to 70 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP50 (IEC standard) |
| Connection | Cable type |
| Cable spec. | Ø 4 mm, 4-wire (Emitter: 3-wire), 2 m |
| Wire spec. | AWG22 (0.08 mm, 60-core), insulator outer diameter: Ø 1.25 mm |
| Material | Case: PC, sensing part: PC, bracket: SPCC, bolt: SCM, nut: SCM |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDTD-P
Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
