Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
- Brand
- Autonics
- Model number
- BA2M-DDTD-P
- Category
- Photoelectric Sensors
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
Price and availability on request
Key features
- Realization of long sensing distance (2 m) by special optical design
- Protection structure: IP64
- Built-in stability indicator
- Sensitivity adjustment function
- 2 color display
Specifications
| Series | BA Series |
|---|---|
| Order code description | 12-24VDC VR IMPROVEMENT |
| Catalogue model group | BA2M-DDT□-□ |
| Sensing type | Diffuse reflective |
|---|---|
| Sensing distance | 2 m |
| Sensing target | Opaque materials, translucent materials |
| Hysteresis | ≤ 20 % of sensing distance |
| Response time | ≤ 1 ms |
| Light source | Infrared |
| Peak emission wavelength | 850 nm |
| Sensitivity adjustment | YES (Adjuster) |
| Operation mode | Light ON mode / Dark ON mode model |
| Indicator | Operation indicator (red), stability indicator (Light ON: orange, Dark ON: green) |
| Unit weight | ≈ 50 g |
| Power supply | 12-24 VDC ±10 % (ripple P-P: ≤ 10%) |
| Current consumption | ≤ 15 mA (output ON: ≤ 30 mA) |
| Control output | NPN open collector output / PNP open collector output model |
| Load voltage | ≤ 26.4 VDC |
| Load current | ≤ 100 mA |
| Residual voltage | NPN: ≤ 1 VDC , PNP: ≤ 2.5 VDC |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | ±240 VDC the square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 100 m/s² (≈ 10 G) in each X, Y, Z direction for 3 times |
| Ambient illuminance (receiver) | Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx |
| Ambient temperature | -25 to 55 ℃, storage: -25 to 70 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP64 (IEC standard) |
| Connection | Cable type |
| Cable spec. | Ø 3 mm, 3-wire, 2 m |
| Wire spec. | AWG24 (0.08 mm, 40-core), insulator outer diameter: Ø 1 mm |
| Material | Case: ABS, CAP: PC, sensing part: PC, adjuster: IXEF |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
-
Enquire about Autonics BC15-LDT-C-P
Autonics BC15-LDT-C-P Color Mark Photoelectric Sensor BC15-LDT-C-P
Autonics BC15-LDT-C-P color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
