Autonics BWP20-20P Slim Plastic Single-Beam Area Sensor BWP20-20P
- Brand
- Autonics
- Model number
- BWP20-20P
- Category
- Area & Door Sensors
Autonics BWP20-20P slim plastic Single-Beam area sensor (BWP Series): sensing distance 0.1 to 5.0 m, Through-beam, NPN / PNP open collector output model output, ≤ 150 mA, IP40 (IEC standard). Order code note: 12-24VDC-A.
Price and availability on request
Key features
- Flat body (13 mm) area sensors with Fresnel lens
- High strength PC / ABS plastic body
- High-speed response time under 7ms
- 4 configurations (optical axis: 8 to 20, detection area: 140 to 380 mm)
- Operation test (emitter stop) function, mutual interference prevention function, Job indicator ON/FLASHING switch, Light ON / Dark ON operation mode switch
- Bright LED indicators on emitter and receiver
- Protection structure: IP40
Specifications
| Series | BWP Series |
|---|---|
| Order code description | 12-24VDC-A |
| Sensing method | Through-beam |
|---|---|
| Light source | Infrared LED (850 nm modulated light) |
| Sensing distance | 0.1 to 5.0 m |
| Sensing target | Opaque material |
| Min. sensing target | ≥ Ø 30 mm |
| Number of optical axes | 20 |
| Sensing height | 380 mm |
| Optical axis pitch | 20 mm |
| Response time | ≤ 6 ms (frequency B: ≤ 7 ms) |
| Operation mode | Light ON / Dark ON (switch) |
| Functions | Emitter OFF, operation mode change, Job indicator ON / flashing |
| Interference protection | Interference protection by transmission frequency selection |
| Synchronization type | Timing method by synchronous line |
| Indicator | Emitter: frequency A indicator (green), frequency B indicator (yellow) Receiver: operation indicator (red), stable indicator (green) Emitter / receiver: Job indicator (red) |
| Weight (packaged) | ≈ 430 g (≈ 680 g) |
| Power supply | 12 - 24 VDC (ripple P-P: ≤ 10 %) |
| Current consumption | Emitter / receiver: ≤ 80 mA |
| Control output | NPN / PNP open collector output model |
| Load voltage | ≤ 30 VDC |
| Load current | ≤ 150 mA |
| Residual voltage | NPN: ≤ 1 VDC , PNP: ≤ 2.5 VDC |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | ± 240 V the square wave noise (pulse width: 1㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case :1,000 VAC 50 / 60 Hz for 1minute |
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
| Ambient illumination (receiver) | Ambient light: ≤ 100,000 ㏓ |
| Ambient temperature | -10 to 55 ℃, storage: -20 to 60 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP40 (IEC standard) |
| Cable spec. | Ø 3.5 mm, 4-wire, 3 m |
| Wire spec. | AWG 24 (0.08 mm, 40-core), insulator diameter: Ø 1 mm |
| Material | Case: PC / ABS, sensing part: PMMA |
| Sold separately | Flat bracket (BK-BWP-ST); Protection bracket (BK-BWP-P ); L-shaped bracket (BK-BWP-L) |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics ADS-AE
Autonics ADS-AE Automatic Door Sensor ADS-AE
Autonics ADS-AE automatic door sensor (ADS-A Series): Infrared reflection method, Relay contact output. Order code note: 12-24VAC/DC.
-
Enquire about Autonics ADS-AF
Autonics ADS-AF Automatic Door Sensor ADS-AF
Autonics ADS-AF automatic door sensor (ADS-A Series): Infrared reflection method, Relay contact output. Order code note: 24-240VAC/24-240VDC.
-
Enquire about Autonics ADS-SE2
Autonics ADS-SE2 Automatic Door Side Sensor ADS-SE2
Autonics ADS-SE2 automatic door side sensor (ADS-SE1/2 Series): sensing distance 0 to 10 m, Through-beam type, Relay contact output, IP30 (IEC standard). Order code note: 12-24VAC/VDC(NEW).
-
Enquire about Autonics BW20-08
Autonics BW20-08 Single-Beam Area Sensor BW20-08
Autonics BW20-08 Single-Beam area sensor (BW Series): sensing distance 0.1 to 7.0 m, Through-beam, NPN or PNP open collector output, ≤ 100 mA, IP65 (IEC standard). Order code note: V2_12-24VDC-C_UL.
