Autonics ADS-AE Automatic Door Sensor ADS-AE
- Brand
- Autonics
- Model number
- ADS-AE
- Category
- Area & Door Sensors
Autonics ADS-AE automatic door sensor (ADS-A Series): Infrared reflection method, Relay contact output. Order code note: 12-24VAC/DC.
Price and availability on request
Key features
- Adjustable hold time switch (2, 7, 15 sec)
- 4-step detection angle adjustment (7.5°, 14.5°, 21.5°, 28.5°)
- Adjustable sensing area (left / right area elimination)
- Power supply: 24 - 240 VAC / 24 - 240 VDC (universal AC / DC type), 12 - 24 VAC / 12 - 24 VDC (universal AC / DC type)
- Built-in microprocessor
- Max. sensing area: 2460 × 86 mm (installation height 2.7 m)
Specifications
| Series | ADS-A Series |
|---|---|
| Order code description | 12-24VAC/DC |
| Catalogue model group | ADS-A□ |
| Mounting height | 2.0 to 2.7 m |
|---|---|
| Sensing area | 9-point |
| Sensing method | Infrared reflection method |
| Output holding time | Time delay ≈ 0.5 sec |
| Stationary sensing time | 2 sec, 7 sec, 15 sec (holding time setting switch) |
| Interference prevention | H, L (interference prevention switch) |
| Adjust angle | 7.5 °, 14.5 °, 21.5 °, 28.5 ° (angle adjustment lever) |
| Eliminate right / left sensing area | (1, 2, 3 area), (7, 8, 9 area) (eliminating right / left sensing area lever) |
| Light source | Infrared chip diode (modulated) |
| Indicator | Operation indicator (orange, green, red) |
| Weight | ≈ 320 g |
| Power supply | ADS-AF: 24 - 240 VAC , 50 / 60 Hz, 24 - 240 VDC (ripple P-P: ≤ 10 %) ADS-AE: 12 - 24 VAC , 50 / 60 Hz, 12 - 24 VDC (ripple P-P: ≤ 10 %) |
| Power consumption | ADS-AF: ≤ 4 VA (≤ 240 VAC at 50 / 60 Hz) ADS-AE: ≤ 2 VA (≤ 24 VAC at 50 / 60 Hz) |
| Control output | Relay contact output |
| Relay contact capacity | 50 VDC 0.1 A (resistive load) |
| Relay contact composition | 1a |
| Relay life cycle | Mechanical: ≥ 20,000,000 times, electrical: ≥ 50,000 times |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | ± 2,000 VDC the square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50 / 60 Hz for 1 minute |
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 100 m/s² (≈ 10 G) in each X, Y, Z direction for 3 times |
| Ambient illumination (receiver) | Sunlight: ≤ 3,000 lx, incandescent lamp: ≤ 3,000 lx |
| Ambient temperature | -20 to 50 ℃, storage: -20 to 70 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection | IP50 (IEC standard) |
| Connection | Cable connector type |
| Material | Case: ABS, lens: acryl, lens cover: acryl |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics ADS-AF
Autonics ADS-AF Automatic Door Sensor ADS-AF
Autonics ADS-AF automatic door sensor (ADS-A Series): Infrared reflection method, Relay contact output. Order code note: 24-240VAC/24-240VDC.
-
Enquire about Autonics ADS-SE2
Autonics ADS-SE2 Automatic Door Side Sensor ADS-SE2
Autonics ADS-SE2 automatic door side sensor (ADS-SE1/2 Series): sensing distance 0 to 10 m, Through-beam type, Relay contact output, IP30 (IEC standard). Order code note: 12-24VAC/VDC(NEW).
-
Enquire about Autonics BW20-08
Autonics BW20-08 Single-Beam Area Sensor BW20-08
Autonics BW20-08 Single-Beam area sensor (BW Series): sensing distance 0.1 to 7.0 m, Through-beam, NPN or PNP open collector output, ≤ 100 mA, IP65 (IEC standard). Order code note: V2_12-24VDC-C_UL.
-
Enquire about Autonics BW20-08P
Autonics BW20-08P Single-Beam Area Sensor BW20-08P
Autonics BW20-08P Single-Beam area sensor (BW Series): sensing distance 0.1 to 7.0 m, Through-beam, NPN or PNP open collector output, ≤ 100 mA, IP65 (IEC standard). Order code note: V2_12-24VDC-C_UL.
