Autonics BWM30-15CLD-T Double-Scan Mapping Sensor (CC-Link, EtherCAT) BWM30-15CLD-T
- Brand
- Autonics
- Model number
- BWM30-15CLD-T
- Category
- Area & Door Sensors
Autonics BWM30-15CLD-T Double-Scan mapping sensor (CC-Link, EtherCAT) (BWM Series): sensing distance Glass + 30 %, Through-beam. Order code note: 24VDC.
Price and availability on request
Key features
- Stable glass substrate detection with using double scan method
- Sensing distance: glass G size +30 %
- Customized models available: sensing channels (4 to 62 channels), optical axis pitch (25 to 200 mm)
- Communication output: CC-Link (ver 1.1, 2.0), EtherCAT
- Easy installation with installation instruction mode
- Mutual interference prevention, bent optical axis alarm, 9-stage sensing level setting, emitter error alarm
- Bright status indicators on slave units
Specifications
| Series | BWM Series |
|---|---|
| Order code description | 24VDC |
| Catalogue model group | BWM□ |
| Sensing method | Through-beam |
|---|---|
| Beam pattern | Double scan type |
| Light source | Infrared LED (850 nm modulated light) |
| Sensing distance | Glass + 30 % |
| Sensing target | Transparent or opaque glass plate |
| CH ordering orientation | Forward (bottom = 1 CH) / Backward (top = 1 CH) |
| Sensing CH | 4 to 62 CH |
| Optical axis pitch | 25 to 200 mm |
| Response time | ≤ 120 ms |
| Operation mode | Light ON / Dark ON |
| Function | Installation guide mode, sensing level setting, optical axis misalignment alarm (low light intensity alarm), emitter damage alarm, self-diagnosis |
| Interference protection | Interference protection by transmission frequency selection |
| Synchronization type | Timing method by synchronous line |
| Indicator | Output indicator (red), stability indicator (green), status indicator (green, yellow, red) |
| Weight (packaged) | CC-Link: ≈3.2 kg (≈ 5.3 kg) (based on BWM82-24CLD-T) EtherCAT: ≈3.42 kg (≈ 5.52 kg) (based on BWM28-50ECD-T) |
| Power supply | 24 VDC (ripple P-P: ≤ 10 %) |
| Current consumption | Master: ≤ 200 mA, slave: ≤ 150 mA |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | The square wave noise by the noise simulator (voltage: 500 V, period: 10 ms, pulse width: 1 us) |
| Dielectric strength | Between the charging part and the case : 500 VAC 50 / 60 Hz for 1 min |
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 210 m/s² (≈ 21 G) in each X, Y, Z direction for 3 times |
| Ambient illumination | Light bulb: 5,000 ㏓, semiconductor: 5,000 ㏓ |
| Ambient temperature | 15 to 35 ℃, storage: 15 to 35 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %, storage: 35 to 85 % (no freezing or condensation) |
| Cable spec. | Ø 5 mm, 6-wire, 250 mm |
| Connector spec. | M17 plug connector |
| Output connector spec. | Connector type: 4-pin, 6-pin connector (5.08 mm pitch) / terminal type: 10-pin terminal |
| Material | Case: AL / ABS, sensing part and Indicator part: PMMA |
| Comm. protocol | CC-Link, EtherCAT |
| Sold separately | M17 connector cable: C5D617- P |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics ADS-AE
Autonics ADS-AE Automatic Door Sensor ADS-AE
Autonics ADS-AE automatic door sensor (ADS-A Series): Infrared reflection method, Relay contact output. Order code note: 12-24VAC/DC.
-
Enquire about Autonics ADS-AF
Autonics ADS-AF Automatic Door Sensor ADS-AF
Autonics ADS-AF automatic door sensor (ADS-A Series): Infrared reflection method, Relay contact output. Order code note: 24-240VAC/24-240VDC.
-
Enquire about Autonics ADS-SE2
Autonics ADS-SE2 Automatic Door Side Sensor ADS-SE2
Autonics ADS-SE2 automatic door side sensor (ADS-SE1/2 Series): sensing distance 0 to 10 m, Through-beam type, Relay contact output, IP30 (IEC standard). Order code note: 12-24VAC/VDC(NEW).
-
Enquire about Autonics BW20-08
Autonics BW20-08 Single-Beam Area Sensor BW20-08
Autonics BW20-08 Single-Beam area sensor (BW Series): sensing distance 0.1 to 7.0 m, Through-beam, NPN or PNP open collector output, ≤ 100 mA, IP65 (IEC standard). Order code note: V2_12-24VDC-C_UL.
