Autonics BTS15-LDTL W 7.2 mm Photoelectric Sensor BTS15-LDTL
- Brand
- Autonics
- Model number
- BTS15-LDTL
- Category
- Photoelectric Sensors
Autonics BTS15-LDTL W 7.2 mm photoelectric sensor (BTS Series): sensing distance 5 to 15 mm, Convergent reflective, ≤ 50 mA, IP67 (IEC standard). Order code note: 12-24VDC.
Price and availability on request
Key features
- W 7.2 mm Photoelectric Sensors; W 7.2 × H 18.6 × L 9.5 mm (Through-beam type); W 7.2 × H 24.6 × L 10.8 mm (Retroreflective, convergent reflective type)
- Detection methods and minimum target size; Through-beam type (BTS1M): Ø 2 mm; Retroreflective type (BTS200): Ø 2 mm (sensing distance: 100 mm); Convergent reflective type (BTS15/BTS30): Ø 0.15 mm (sensing distance: 10 mm)
- Maximum sensing distance: 1 m (Through-beam type)
- Operation indicator (red) and stability indicator (green) show operation status
- Stainless steel (SUS304) mounting brackets
- Protection structure: IP67
Specifications
| Series | BTS Series |
|---|---|
| Order code description | 12-24VDC |
| Catalogue model group | BTS□-LDT□-□ |
| Sensing type | Convergent reflective |
|---|---|
| Sensing distance | 5 to 15 mm |
| Sensing target | Opaque materials, translucent materials |
| Min. sensing target | ≥ Ø 0.15 mm |
| Hysteresis | ≤ 15 % of sensing distance |
| Response time | ≤ 1 ms |
| Light source | Red LED |
| Peak emission wavelength | 650 nm |
| Operation mode | Light ON mode / Dark ON mode model |
| Indicator | Operation indicator (red), stability indicator (green) |
| Unit weight (packaged) | ≈ 25 g (≈ 45 g) |
| Power supply | 12-24 VDC ±10 % (ripple P-P: ≤ 10%) |
| Current consumption | It depends on the sensing type |
| Through-beam | Emitter: ≤ 20 mA, receiver: ≤ 20 mA |
| Reflective | ≤ 20 mA |
| Control output | NPN open collector output / PNP open collector output model |
| Load voltage | ≤ 26.4 VDC |
| Load current | ≤ 50 mA |
| Residual voltage | NPN : ≤ 1 VDC , PNP : ≤ 2 VDC |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | ±240 VDC the square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
| Ambient illuminance (receiver) | Sunlight: ≤ 10,000 lx, incandescent lamp: ≤ 3,000 lx |
| Ambient temperature | -20 to 55 ℃, storage: -30 to 70 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP67 (IEC standard) |
| Connection | Cable type |
| Cable spec. | Ø 2.5 mm, 3-wire (emitter: 2-wire), 2 m |
| Wire spec. | AWG 28 (0.08 mm, 19-core), insulator outer diameter: Ø 0.9 mm |
| Material | Case: PBT, sensing part: PMMA, bracket: SUS304, bolt: SWCH10A |
| Sold separately | Reflector: MS Series; Retroreflective tape: MST Series; Bracket B; Slit for through-beam type:; BTS1M-ST (sticker), BTS1M-ST-T; (SUS material) |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDTD-P
Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
