Autonics BS5-P1MD-P Push-Button Type Photomicro Sensor BS5-P1MD-P
- Brand
- Autonics
- Model number
- BS5-P1MD-P
- Category
- Photoelectric Sensors
Autonics BS5-P1MD-P Push-Button type photomicro sensor (BS5-P Series): Push button type, ≤ 50 mA, IP40 (IEC standard). Order code note: V2-12~24VDC.
Price and availability on request
Key features
- Button operation enables accurate detection regardless of material, color, or reflectance of target object
- Optimized for transport detection of semiconductor wafer enclosures (FOUP, FOSB, etc.)
- Optical detection of button operation guarantees 5 million operations of the mechanical life cycle
- Total of 4 red LED indicators (side: 2, top: 2) for higher visibility of operation status
- Increased product durability with steel mounting brackets
- Emitter OFF function and check stable operation functions
- Built-in reverse polarity protection circuit and output short overcurrent protection circuit
Specifications
| Series | BS5-P Series |
|---|---|
| Order code description | V2-12~24VDC |
| Catalogue model group | BS5-P1M□-□ |
| Sensing type | Push button type |
|---|---|
| Button stop position | 5.0 ± 0.4 mm |
| Button output switching position | 4.0 ± 0.5 mm |
| Button operation limit position | ≤ 0 mm |
| Operation load | ≤ 3 N |
| Light source | Infrared LED |
| Peak emission wavelength | 940 nm |
| Emitter OFF | YES (External input) ; Short at 0 V or ≤ 0.25 VDC (outflow current ≤ 30 mA) |
| Check stable operation | YES (External input) |
| Operation mode | Light ON (Unpressed button, output ON) / Dark ON (Pressed button, output ON) mode model |
| Indicator | Operation indicator (red) |
| Unit weight (packaged) | ≈ 30 g (≈ 50 g) |
| External input | NPN output |
| Emitter ON | Open (leakage current ≤ 0.4 mA) |
| Response time | ≤ 1 ms |
| Power supply | 12-24 VDC ±10 % (ripple P-P: ≤ 10 %) |
| Current consumption | ≤ 35 mA |
| Control output | NPN open collector output / PNP open collector output model |
| Load voltage | ≤ 26.4 VDC |
| Load current | ≤ 50 mA |
| Residual voltage | NPN: ≤ 1.5 VDC , PNP: ≤ 1.5 VDC |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (250 VDC megger) |
| Noise immunity | ±240 VDC the square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC at 50/60 Hz for 1 min |
| Vibration | 1.5 mm double amplitude at 10 to 55 Hz frequency in each X, Y, Z direction for 2 hours |
| Shock | 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
| Mechanical life cycle | ≥ 5,000,000 operations (1 operation = stop position - operation limit position - stop position) |
| Ambient illumination (receiver) | Fluorescent lamp: ≤ 1,000 lx |
| Ambient temperature | -20 to 55 ℃, storage: -25 to 70 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP40 (IEC standard) |
| Connection method | Cable type |
| Cable spec. | Ø 3 mm, 4-wire, 1 m |
| Wire spec. | Refer to the specifications below depending on the models. |
| BS5-P1M - - | AWG26 (0.08 mm, 30-core), insulator outer diameter: Ø 0.93 mm ; Case: PC + G, button: POM, sleeve: SUS304 |
| BS5-P1M - -U | AWG26 (0.08 mm, 28-core), insulator outer diameter: Ø 0.9 mm ; Case: PC, button: POM, sleeve: SUS304 |
| Material | Refer to the specifications below depending on the models. |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDTD-P
Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
