Autonics BS5-K1M Groove-Depth 9 mm Photomicro Sensor BS5-K1M
- Brand
- Autonics
- Model number
- BS5-K1M
- Category
- Photoelectric Sensors
Autonics BS5-K1M Groove-Depth 9 mm photomicro sensor (BS5 Series): sensing distance 5 mm, Through-beam, ≤ 100 mA, IP50 (IEC standard). Order code note: 5-24VDC-C.
Price and availability on request
Key features
- Various shapes available for installation flexibility (K, T, V, L, Y, F, R, TA types)
- Level sensing side and body for minimal detection errors
- Operation indicators viewable from multiple directions
- Indicator ON when light received and indicator ON when light blocked models available
- High shock and vibration resistance
- High-speed response frequency: 2kHz
- Standard and flexible type cables available
Specifications
| Series | BS5 Series |
|---|---|
| Order code description | 5-24VDC-C |
| Sensing type | Through-beam |
|---|---|
| Sensing distance | 5 mm |
| Sensing target | Opaque materials |
| Min. sensing target | ≥ 0.8 mm × 2 mm |
| Hysteresis | ≤ 0.05 mm |
| Response time | Received light: ≤ 20 ㎲ , Interrupted light: ≤ 100 ㎲ |
| Frequency response | 2 kHz |
| Light source | Infrared LED |
| Peak emission wavelength | 940 nm |
| Operation mode | Light ON-Dark ON selectable (control wire) |
| Indicator | Operation indicator (red) |
| Unit weight | Cable type: ≈ 50 g, Connector type: ≈ 30 g |
| Power supply | 5-24 VDC ±10 % (ripple P-P: ≤ 10 %) |
| Current consumption | ≤ 30 mA |
| Control output | NPN open collector / PNP open collector output model |
| Load voltage | ≤ 30 VDC |
| Load current | ≤ 100 mA |
| Residual voltage | NPN: ≤ 1.2 VDC , PNP: ≤ 1.2 VDC |
| Protection circuit | Reverse power polarity protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (250 VDC megger) |
| Noise immunity | The square wave noise (pulse width: 1㎲) by the noise simulator ± 240 VDC |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50/60 Hz for 1 minute |
| Vibration | 1.5 mm double amplitude (max. acceleration 196 m/s2) at frequency of 10 to 2,000 Hz in each X, Y, Z direction for 2 hours |
| Shock | 15,000 m/s2 (approx. 1,500 G) in each X, Y, Z direction for 3 times |
| Ambient illumination (receiver) | Fluorescent lamp: ≤ 1,000 |
| Ambient temperature | -20 to 55 ℃, storage: -25 to 85 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation) |
| Protection rating | IP50 (IEC standard) |
| Connection method | Cable / Connector type model |
| Cable spec. | Standard / Flexible cable model: Ø 3 mm, 4-wire, 1 m |
| Wire spec. | AWG28 (0.08 mm, 19-core), insulator outer diameter: Ø 0.88 mm |
| Material | Case: PBT, Sensing part: PC |
| Sold separately | Connector type connector: CT-01; Cable type connector: CT-02- |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDTD-P
Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
