Autonics BS4-T2M Groove-Depth 6.5 mm Photomicro Sensors with Built-In Connector BS4-T2M
- Brand
- Autonics
- Model number
- BS4-T2M
- Category
- Photoelectric Sensors
Autonics BS4-T2M Groove-Depth 6.5 mm photomicro sensors with Built-In connector (BS4 Series): sensing distance 5 mm, Through-beam, ≤ 50 mA, IP50 (IEC standard). Order code note: V1-5~24VDC.
Price and availability on request
Key features
- Compact size with built-in connector
- Dedicated connector cables (sold separately) and universal connector cables supported
- Various shapes available for installation flexibility (K, L, R, T, TA, F, Y types)
- Level sensing side and body for minimal detection errors
- Operation indicators viewable from multiple directions
- Indicator ON when light received and indicator ON when light blocked models available
- High shock and vibration resistance
- High-speed response frequency: 2kHz
- Standard and flexible connector cables (sold separately)
Specifications
| Series | BS4 Series |
|---|---|
| Order code description | V1-5~24VDC |
| Sensing type | Through-beam |
|---|---|
| Sensing distance | 5 mm |
| Sensing target | Opaque materials |
| Min. sensing target | ≥ 0.8 mm × 1.8 mm |
| Hysteresis | ≤ 0.05 mm |
| Response time | Received light: ≤ 20 ㎲ , Interrupted light: ≤ 80 ㎲ |
| Response frequency | 2 kHz |
| Light source | Infrared LED |
| Peak emission wavelength | 940 nm |
| Operation mode | Built-in Light ON / Dark ON |
| Indicator | Operation indicator (Red) |
| Unit weight | ≈ 2.4 g |
| Power supply | 5-24 VDC ±10% (ripple P-P: ≤ 10%) |
| Current consumption | ≤ 15 mA |
| Control output | NPN open collector output / PNP open collector output Model |
| Load voltage | ≤ 24 VDC |
| Load current | ≤ 50 mA |
| Residual voltage | NPN: ≤ 1.2 VDC , PNP: ≤ 1.2 VDC |
| Protection circuit | Reverse power polarity protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (250 VDC megger) |
| Noise immunity | ± 240 VDC square wave noise (pulse width 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration | 1.5 mm double amplitude (max. acceleration 196 m/s2) at frequency of 10 to 2,000 Hz in each X, Y, Z direction for 2 hours |
| Shock | 15,000 m/s2 (≈ 1,500 G) in each X, Y, Z direction for 3 times |
| Ambient illuminance (receiver) | Fluorescent lamp: ≤ 1,000 lx |
| Ambient temperature | -20 to 55℃, Storage: -25 to 85℃ (no freezing or condensation environment) |
| Ambient humidity | 35 to 85%RH, Storage: 35 to 85%RH (no freezing or condensation environment) |
| Protection rating | IP50 (IEC standard) |
| Connection method | Connector type |
| Material | Case: PBT, sensing part: PC |
| Sold separately | Connector: CT-03 , CT-04 |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDTD-P
Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
