Autonics BRQM30M-TDTA-C-P Cylindrical Photoelectric Sensor (Front Sensing Type) BRQM30M-TDTA-C-P
- Brand
- Autonics
- Model number
- BRQM30M-TDTA-C-P
- Category
- Photoelectric Sensors
Autonics BRQM30M-TDTA-C-P cylindrical photoelectric sensor (Front sensing type) (BRQ Series): sensing distance 30 m, Through-beam, ≤ 100 mA. Order code note: V2-10~30V(ENG).
Price and availability on request
Key features
- Excellent noise immunity and minimal influence from ambient light
- Mutual interference prevention function (except through-beam type)
- Sensitivity adjuster
- Various materials: Plastic, Metal (Ni-plated Brass), SUS316L
- Long sensing distance: 30 m (through-beam type)
- Body size; BRQT, BRQM: Standard; BRQP: Standard, Short body
- Protection structure:; BRQT : IP67, IP69K; BRQM, BRQP: IP67
Specifications
| Series | BRQ Series |
|---|---|
| Order code description | V2-10~30V(ENG) |
| Catalogue model group | BRQ□-TDT□-□-□ |
| Sensing type | Through-beam |
|---|---|
| Sensing distance | 30 m |
| Sensing target | Opaque materials |
| Min. sensing target | ≥ Ø 7 mm |
| Response time | ≤ 1 ms |
| Light source | Red |
| Peak emission wavelength | 660 nm |
| Sensitivity adjustment | YES (Adjuster) |
| Operation mode | Light ON mode - Dark ON mode selectable (Control wire) |
| Indicator | Operation indicator (yellow), stability indicator (green), power indicator (red) |
| Unit weight (packaged) | Material |
| Cable type | SUS316L ; Brass, Ni-plate ; Plastic ; Plastic (short) |
| Connector type | SUS316L ; Brass, Ni-plate ; Plastic ; Plastic (short) |
| Power supply | 10-30 VDC ±10 % (ripple P-P: ≤ 10 %) |
| Current consumption | It depends on the sensing type |
| Through-beam | Emitter: ≤ 20 mA, receiver: ≤ 20 mA |
| Reflective | ≤ 30 mA |
| Control output | NPN open collector output / PNP open collector output model |
| Load voltage | ≤ 30 VDC |
| Load current | ≤ 100 mA |
| Residual voltage | NPN: ≤ 2 VDC , PNP: ≤ 2 VDC |
| Protection circuit | Reverse power/output protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | ±240 VDC the square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
| Ambient illuminance (receiver) | Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx |
| Ambient temperature | -25 to 60 ℃, storage: -30 to 70 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP67 (IEC standard), SUS316L material model: IP67 (IEC standard), IP69K (DIN standard) |
| Connection | Cable type / Connector type model |
| Cable spec. | Ø 4 mm, 4-wire, (Emitter: 2-wire), 2 m |
| Wire spec. | AWG26 (0.52 mm, 20-core), insulator outer diameter: Ø 1 mm |
| Connector | M12 4-pin plug type |
| Material | Case: It depends on the model. (refer to ‘Ordering Information’), lens and lens cover: PMMA |
| Sold separately | Reflector: MS Series; Retroreflective tape: MST Series; Bracket: BK-BR-A; M12 connector cable: C D(H)4- -; Fixing cap for plastic short body: BK-BR-B |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDTD-P
Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
