Autonics BMS5M-TDT-P Side Sensing Photoelectric Sensor BMS5M-TDT-P
- Brand
- Autonics
- Model number
- BMS5M-TDT-P
- Category
- Photoelectric Sensors
Autonics BMS5M-TDT-P side sensing photoelectric sensor (BMS Series): sensing distance 5 m, Through-beam, ≤ 200 mA. Order code note: 12-24VDC.
Price and availability on request
Key features
- Built-in reverse polarity protection circuit and output short overcurrent protection circuit
- Response time: Max. 1 ms
- Light ON / Dark ON mode selectable by control wire
- Sensitivity adjuster (except for through-beam type)
Specifications
| Series | BMS Series |
|---|---|
| Order code description | 12-24VDC |
| Catalogue model group | BMS5M-TDT-□ |
| Sensing type | Through-beam |
|---|---|
| Sensing distance | 5 m |
| Sensing target | Opaque materials |
| Min. sensing target | ≥ Ø 10 mm |
| Response time | ≤ 1 ms |
| Light source | Infrared |
| Peak emission wavelength | 940 nm |
| Operation mode | Light ON mode - Dark ON mode selectable (control wire) |
| Indicator | Operation indicator (red), power indicator(red) |
| Unit weight | ≈ 180 g |
| Power supply | 12-24 VDC ±10 % (ripple P-P: ≤ 10%) |
| Current consumption | It depends on the sensing type |
| Through-beam | Emitter: ≤ 50 mA, receiver: ≤ 50 mA |
| Reflective | ≤ 45 mA |
| Control output | NPN open collector output / PNP open collector output model |
| Load voltage | ≤ 30 VDC |
| Load current | ≤ 200 mA |
| Residual voltage | NPN: ≤ 1 VDC , PNP: ≤ 2.5 VDC |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | ±240 VDC the square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
| Ambient illuminance (receiver) | Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx |
| Ambient temperature | -10 to 60 ℃, storage: -25 to 70 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Connection | Cable type |
| Cable spec. | Ø 5 mm, 4-wire (Emitter: 2-wire), 2 m |
| Wire spec. | AWG22 (0.08 mm, 60-core), insulator outer diameter: Ø 1.25 mm |
| Material | Case: ABS, sensing part: PC (through-beam type ) or Acrylic (retroreflective, diffuse reflective type), bracket: SPCC, bolt: SCM, nut: SCM |
| Sold separately | Reflector: MS Series; Retroreflective tape: MST Series |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDTD-P
Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
