Autonics BJX10M-TDT Rectangular Photoelectric Sensor BJX10M-TDT
- Brand
- Autonics
- Model number
- BJX10M-TDT
- Category
- Photoelectric Sensors
Autonics BJX10M-TDT rectangular photoelectric sensor (BJX Series): sensing distance 10 m, Through-beam, ≤ 100 mA, IP65 (IEC standard). Order code note: V2-10~30V(ENG).
Price and availability on request
Key features
- Long sensing distance with high quality lens: Through-beam type 30 m, diffuse reflective type 1 m, polarized retroreflective type 3 m (MS-2A)
- M.S.R. (Mirror Surface Rejection) function (Polarized retroreflective type)
- Compact size : W 11 × H 32 × L 20 mm
- Switch for selecting Light ON/Dark ON mode
- Built-in sensitivity adjustment adjuster
- Reverse power protection circuit, output short overcurrent protection circuit
- Mutual interference prevention function (except through-beam type)
- Excellent noise immunity and minimal influence from ambient light
- Protection structure: IP65
Specifications
| Series | BJX Series |
|---|---|
| Order code description | V2-10~30V(ENG) |
| Catalogue model group | BJX□-TDT-□-□ |
| Sensing type | Through-beam |
|---|---|
| Sensing distance | 10 m |
| Sensing target | Opaque materials |
| Min. sensing target | ≥ Ø 15 mm |
| Response time | ≤ 1 ms |
| Light source | Red |
| Peak emission wavelength | 660 nm |
| Sensitivity adjustment | YES (Adjuster) |
| Operation mode | Light ON mode - Dark ON mode selectable (Adjuster) |
| Indicator | Operation indicator (yellow), stability indicator (green), power indicator (red) |
| Unit weight (packaged) | Through-beam |
| Cable type | ≈ 95 g (≈ 145 g) |
| Connector type | ≈ 12 g (≈ 65 g) |
| Power supply | 10-30 VDC ±10 % (ripple P-P: ≤ 10 %) |
| Current consumption | It depends on the sensing type |
| Through-beam | Emitter: ≤ 20 mA, receiver: ≤ 20 mA |
| Reflective | ≤ 30 mA |
| Control output | NPN open collector output / PNP open collector output model |
| Load voltage | ≤ 30 VDC |
| Load current | ≤ 100 mA |
| Residual voltage | NPN: ≤ 1 VDC , PNP: ≤ 2 VDC |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | ±240 VDC the square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
| Ambient illuminance (receiver) | Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx |
| Ambient temperature | -25 to 60 ℃, storage: -40 to 70 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP65 (IEC standard) |
| Connection | Cable type / Connector type model |
| Cable spec. | Ø 4 mm, 3-wire (Emitter: 2-wire), 2 m |
| Wire spec. | AWG26 (0.52 mm, 20-core), insulator outer diameter: Ø 1 mm |
| Connector | M8 4-pin plug type |
| Material | Case: PC, CAP: PC, sensing part: PMMA |
| Sold separately | Reflector: MS Series; Retroreflective tape: MST Series; Bracket A, B; M8 connector cable: CID(H)408- ,; CLD(H)408- |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDTD-P
Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
