54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Autonics BFX-D1-N Dual Display Fiber Optic Amplifier BFX-D1-N

Autonics BFX-D1-N Dual Display Fiber Optic Amplifier BFX-D1-N

Model number
BFX-D1-N

Autonics BFX-D1-N dual display fiber optic amplifier (BFX Series): ≤ 100 mA, IP40 (IEC standard). Order code note: 12-24VDC(ENG).

Price and availability on request

Request a quote

Sent with the product details: Autonics BFX-D1-N Dual Display Fiber Optic Amplifier BFX-D1-N.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Dual-display for light incident level and setting value
  • Enables to detect the minute object with 1/10,000 high resolution
  • Enables to detect with high-speed moving object (response time 50 ㎲)
  • 5 response times: ultra fast mode (50 ㎲), fast mode (150 ㎲), standard mode (500 ㎲), long distance mode (4 ms), ultra long distance mode (10 ms)
  • Anti-saturation setting function prevents malfunction by saturated light
  • External input: emitter OFF, remote sensitivity setting, peak reset, output ON/OFF/Keep, energy saving OFF
  • Multiple sensitivity setting modes available: auto tuning (fine-adjusting sensitivity) teaching sensitivity setting (button or external input auto-tuning, 1-point, 2-point, positioning)

Specifications

Model
SeriesBFX Series
Order code description12-24VDC(ENG)
Catalogue model groupBFX-D1-□
Specifications
Light sourceRed LED
Peak emission wavelength660 nm, modulated
Response timeStandard (500 ㎲), Long distance (4 ms), Ultra long distance (10 ms), Ultra fast (50 ㎲), Fast (150 ㎲) mode
Sensitivity settingManual, Teaching (Auto-tuning, 1-point, 2-point, positioning)
Operation modeLight ON, Dark ON
Measured value display7-segment LCD, 4-digit (decimal, percentage)
Operation mode of the timerOFF, OFF Delay, ON Delay, One-shot
External inputTeaching sensitivity, initialization of the incident light level, emitter OFF, control output setting, energy saving mode release
IndicatorOperation indicator (red), display screen (PV display part: red LED, SV display part: green LED)
Unit weight (packaged)≈ 16 g (≈ 115 g)
Power supply12-24 VDC ±10% (ripple P-P: ≤ 10%)
Current consumption≤ 50 mA
Control outputNPN open collector output / PNP open collector output model
Load voltage≤ 24 VDC
Load current≤ 100 mA
Residual voltageNPN: ≤ 1 VDC , PNP: ≤ 3 VDC
Protection circuitReverse power protection circuit, output short overcurrent protection circuit, surge protection circuit
Insulation resistance≥ 20 MΩ (500 VDC megger)
Dielectric strengthBetween the charging part and the case: 1,000 VAC 50 / 60 Hz for 1 min
Vibration1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours
Shock500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Ambient illuminance (receiver)Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx
Ambient temperature-10 to 50 ℃, storage: -20 to 70 ℃ (no freezing or condensation)
Ambient humidity35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation)
Protection ratingIP40 (IEC standard)
ConnectionConnector cable
Cable spec.Ø 4 mm, 4-wire, 2 m
Wire spec.AWG22 (0.08 mm, 60-core), insulator outer diameter: Ø 1.25 mm
Tightening torque for fiber optic unit≥ 2kgf
MaterialCase: POK, cover: PC
Accessories
Sold separatelyBracket: BFX-BRACKET; Fiber optic units

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products