54, Ezra Street , Kolkata - 700001 , West Bengal, IndiaMonday to Saturday, 10:30 am to 6:30 pm

Industrial Supply Syndicate Kolkata, since 1977 Send an enquiry
Autonics BF5R-S1-P Single / Dual Display Fiber Optic Amplifier BF5R-S1-P

Autonics BF5R-S1-P Single / Dual Display Fiber Optic Amplifier BF5R-S1-P

Model number
BF5R-S1-P

Autonics BF5R-S1-P single / dual display fiber optic amplifier (BF5 Series): ≤ 100 mA, IP40 (IEC standard). Order code note: 12-24VDC.

Price and availability on request

Request a quote

Sent with the product details: Autonics BF5R-S1-P Single / Dual Display Fiber Optic Amplifier BF5R-S1-P.

A phone number or an email address is needed, so we can reply.

We use these details only to reply to your enquiry. See our privacy notice.

Key features

  • Dual-display for light incident level and setting value (BF5 -D)
  • Enables to detect the minute object with 1 / 10,000 high resolution
  • Enables to detect with high-speed moving object (response time 50 ㎲)
  • 5 response times: ultra fast mode (50 ㎲), fast mode (150 ㎲), standard mode (500 ㎲), long distance mode (4 ms), ultra long distance mode (10 ms)
  • Anti-saturation setting function prevents malfunction by saturated light
  • Easy sensitivity setting
  • Long lasting amplifier regardless of element’s life degradation or temperature change
  • Multiple sensitivity setting modes available: auto-tuning, 1-point (maximum sensitivity), 2-point, positioning teaching

Specifications

Model
SeriesBF5 Series
Order code description12-24VDC
Catalogue model groupBF5R-S1-□
Specifications
Response timeStandard (500 ㎲), Long distance (4 ms), Ultra long distance (10 ms), Ultra fast (50 ㎲), Fast (150 ㎲) mode ; Standard (500 ㎲), Long distance (4 ms), Fast (150 ㎲) mode
Sensitivity settingManual, Teaching (Auto-tuning, 1-point, 2-point, positioning) ; Manual, Teaching (Auto-tuning)
Operation modeLight ON, Dark ON
Measured value display7-segment LCD, 4-digit (decimal, percentage)
Operation mode of the timerOFF, OFF Delay, ON Delay, One-shot ; OFF Delay (time range: OFF, 10 ms, 40 ms)
Max. cascading units≤ 31 units
Mutual interference prevention≤ 8 units
IndicatorOperation indicator (red), display screen (PV display part: red LED, SV display part: green LED) ; Operation indicator (red), display screen (PV / SV display part: red LED)
Unit weight (packaged)≈ 20 g (≈ 138 g)
Light sourceRed LED
Peak emission wavelength660 nm, modulated
Power supply12-24 VDC ±10% (ripple P-P: ≤ 10%)
Current consumption≤ 50 mA
Control outputNPN open collector output / PNP open collector output model
Load voltage≤ 24 VDC
Load current≤ 100 mA
Residual voltageNPN: ≤ 1 VDC , PNP: ≤ 3 VDC
Protection circuitReverse power protection circuit, output short over current protection circuit, surge protection circuit
Insulation resistance≥ 20 MΩ (500 VDC megger)
Dielectric strengthBetween the charging part and the case: 1,000 VAC 50 / 60 Hz for 1 min
Vibration1 mm double amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours
Shock500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times
Ambient illuminance (receiver)Sunlight: ≤ 11,000 lx, incandescent lamp: ≤ 3,000 lx
Ambient temperature-10 to 50 ℃, storage: -20 to 70 ℃ (no freezing or condensation)
Ambient humidity35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation)
Protection ratingIP40 (IEC standard)
ConnectionConnector cable
Cable spec.Ø 4 mm, 3-wire, 2 m
Wire spec.AWG22 (0.08 mm, 60-core), insulator outer diameter: Ø 1.25 mm
Tightening torque for fiber optic unit≥ 2kgf
MaterialCase: PBT, cover: PC

Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.

Related products