Autonics BC15-LDT-C-P Color Mark Photoelectric Sensor BC15-LDT-C-P
- Brand
- Autonics
- Model number
- BC15-LDT-C-P
- Category
- Photoelectric Sensors
Autonics BC15-LDT-C-P color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
Price and availability on request
Key features
- Outstanding color matching accuracy; R.G.B light emitting diodes and 12-bit resolution; 2 detection modes (color only / color + intensity); 3-step sensitivity adjustment for each mode (fine, normal, rough)
- External light interference reduction minimizes errors and allows stable detection
- Check reference color with teaching indicator
- Operation indicator (red), stability indicator (green), timer indicator (orange)
- Configure operation functions with external input from wiring
- W 1.24 × L 6.7 mm spot size for detection of tiny targets and color marks
- Protection structure: IP67
Specifications
| Series | BC Series |
|---|---|
| Order code description | 12-24VDC |
| Catalogue model group | BC15-LDT-C-□ |
| Sensing type | Convergent reflective |
|---|---|
| Sensing distance | 15 mm ± 2 mm |
| Sensing target | Opaque materials, translucent materials |
| Hysteresis | ≤ 20 % of sensing distance (may vary by sensing mode or sensitivity) |
| Response time | ≤ 500 μs |
| Light source | Full Color (Red, Green, Blue) |
| Min. spot size | W 1.24 × L 6.7 mm |
| Sensing mode | C mode (color only) - C+I mode (color + intensity) selectable (SET key or SET cable) |
| Sensitivity adjustment | YES (SET key or SET cable) |
| Operation mode | Color match (Normally Open) - Color mismatch (Normally Closed) mode selectable (Adjuster) |
| Teaching | YES |
| Timer | OFF-delay mode: 40 ms |
| Indicator | Operation indicator (red), stability indicator (green), teaching indicator (full color), timer indicator (orange) |
| Unit weight (packaged) | ≈ 14 g (≈ 80 g) |
| Power supply | 12-24 VDC ±10 % (ripple P-P: ≤ 10 %) |
| Current consumption | ≤ 30 mA |
| Control output | NPN open collector output / PNP open collector output model |
| Load voltage | ≤ 30 VDC |
| Load current | ≤100 mA |
| Residual voltage | NPN: ≤ 1 VDC , PNP: ≤ 2.5 VDC |
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit |
| Insulation resistance | ≥ 20 MΩ (500 VDC megger) |
| Noise immunity | ±240 VDC the square wave noise (pulse width: 1 ㎲) by the noise simulator |
| Dielectric strength | Between the charging part and the case: 1,000 VAC 50/60 Hz for 1 min |
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
| Ambient illuminance (receiver) | Incandescent lamp: ≤ 3,000 lx |
| Ambient temperature | -10 to 55 ℃, storage: -25 to 75 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) |
| Protection rating | IP67 (IEC standard) |
| Connection | Connector type |
| Connector | M12 4-pin plug type |
| Material | Case: PC, sensing part: Acrylic, bracket: SUS304, bolt: Carbon Steel |
| Sold separately | M12 connector cable: C D(H)4- - |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics BA2M-DDT
Autonics BA2M-DDT Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT
Autonics BA2M-DDT diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDT-P
Autonics BA2M-DDT-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDT-P
Autonics BA2M-DDT-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BA2M-DDTD-P
Autonics BA2M-DDTD-P Diffuse Reflective Long-Distance Photoelectric Sensor BA2M-DDTD-P
Autonics BA2M-DDTD-P diffuse reflective Long-Distance photoelectric sensor (BA Series): sensing distance 2 m, Diffuse reflective, ≤ 100 mA, IP64 (IEC standard). Order code note: 12-24VDC VR IMPROVEMENT.
-
Enquire about Autonics BC15-LDT-C
Autonics BC15-LDT-C Color Mark Photoelectric Sensor BC15-LDT-C
Autonics BC15-LDT-C color mark photoelectric sensor (BC Series): sensing distance 15 mm ± 2 mm, Convergent reflective, ≤100 mA, IP67 (IEC standard). Order code note: 12-24VDC.
