Autonics ATS8P-2M W 38 × H 42 mm Power OFF Delay Analog Timer ATS8P-2M
Autonics ATS8P-2M W 38 × H 42 mm power OFF delay analog timer (ATS8P Series): Relay output, 24 VAC 50 / 60 Hz, 24 VDC supply. Order code note: 24VAC/DC(NEW).
Price and availability on request
Key features
- Control time range (ATS8P- S: 0.1 to 10 sec, ATS8P- M: 0.1 to 10 min)
- Direct reading for time setting and time range with easy adjustment
- Power supply: 100 - 120 VAC 50 / 60 Hz, 200 - 240 VAC 50 / 60 Hz, 24 VAC 50 / 60 Hz, 24 VDC universal
- Close and DIN rail mounting with the dedicated socket (PS-M8) width 41 mm
- Easy mounting and installation / maintenance with the dedicated bracket for DIN 48 × 48 mm
- Application: Protection circuit when momentary power failure and start it again
Specifications
| Series | ATS8P Series |
|---|---|
| Order code description | 24VAC/DC(NEW) |
| Catalogue model group | ATS8P-2□ |
| Function | Power OFF Delay |
|---|---|
| Return time | ≤ 100 ms |
| Control output | Relay |
| Contact type | Time limit DPDT (2c) |
| Contact capacity | 250 VAC 3 A, 30 VDC 3 A resistive load |
| Error | Repeat: ≤ ± 0.2% ± 10 ms SET: ≤ ± 5% ± 50 ms Voltage: ≤ ± 0.5% Temp.: ≤ ± 2% |
| Time operation | Power OFF Start |
| Unit weight | SEC unit model: ≈ 80 g, MIN unit model: ≈ 85 g |
| Power supply | 24 VAC 50 / 60 Hz, 24 VDC |
| Permissible voltage range | 90 to 110 % of rated voltage |
| Power consumption | AC: ≤ 0.2 VA DC: ≤ 0.2 W |
| Insulation resistive | 100 MΩ (500 VDC megger) |
| Dielectric strength | Between the charging part and the case : 3,000 VAC at 50 / 60 Hz for 1 min |
| Noise immunity | ± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
| Vibration | 0.75 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 1 hour |
| Vibration (malfunction) | 0.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 10 min |
| Shock | 300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
| Shock (malfunction) | 100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
| Relay life cycle | Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VAC 3 A resistive load) |
| Ambient temperature | -10 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation) |
| Sold separately | 8-pin controller socket: PG-08, PS-08(N), PS-M8 |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics AT11DN
Autonics AT11DN W 48 × H 48 mm Analog Timer AT11DN
Autonics AT11DN W 48 × H 48 mm analog timer (ATN Series): Relay output, 12 VDC supply, input INHIBIT, START, RESET. Order code note: 100-240VAC/24-240VDC.
-
Enquire about Autonics AT11DN-1
Autonics AT11DN-1 W 48 × H 48 mm Analog Timer AT11DN-1
Autonics AT11DN-1 W 48 × H 48 mm analog timer (ATN Series): Relay output, 12 VDC supply, input INHIBIT, START, RESET. Order code note: 12VDC.
-
Enquire about Autonics AT11EN
Autonics AT11EN W 48 × H 48 mm Analog Timer AT11EN
Autonics AT11EN W 48 × H 48 mm analog timer (ATN Series): Relay output, 24 VAC 50 / 60 Hz, 24 VDC supply, input INHIBIT, START, RESET. Order code note: 100-240VAC/24-240VDC.
-
Enquire about Autonics AT8N
Autonics AT8N W 48 × H 48 mm Analog Timer AT8N
Autonics AT8N W 48 × H 48 mm analog timer (ATN Series): Relay output, 100 - 240 VAC 50 / 60 Hz, 24 - 240 VDC supply. Order code note: 100-240VAC/24-240VDC.
