Autonics AT11EN W 48 × H 48 mm Analog Timer AT11EN
Autonics AT11EN W 48 × H 48 mm analog timer (ATN Series): Relay output, 24 VAC 50 / 60 Hz, 24 VDC supply, input INHIBIT, START, RESET. Order code note: 100-240VAC/24-240VDC.
Price and availability on request
Key features
- Wide range of power supply: 100 - 240 VAC 50 / 60 Hz, 24 - 240 VDC / 24 VAC 50 / 60 Hz, 24 VDC / 12 VDC
- Various output operation (6 operation modes)
- Multi time range (16 types of time range)
- Wide control time (0.05 sec to 100 hour)
- Easy setting of time, time range, output operation mode
- Easy to check output status by indicator
Specifications
| Series | ATN Series |
|---|---|
| Order code description | 100-240VAC/24-240VDC |
| Catalogue model group | AT11EN-□ |
| Function | Multi Function Timer |
|---|---|
| Return time | ≤ 100 ms |
| Time operation | Signal ON Start |
| Input | INHIBIT, START, RESET |
| Min. signal width | ≈ 50 ms |
| No-voltage input | Short-circuit impedance: ≤ 1 kΩ Short-circuit residual voltage: ≤ 0.5 VDC Open-circuit impedance: ≥ 100 kΩ |
| Control output | Relay |
| Contact type | Time limit SPDT (1c) + Instantaneous SPDT (1c) |
| Contact capacity | 250 VAC 5 A, 30 VDC 5 A resistive load |
| Error | Repeat: ≤ ± 0.2% ± 10 ms SET: ≤ ± 5% ± 50 ms Voltage: ≤ ± 0.5% Temp.: ≤ ± 2% |
| Unit weight (packaging) | ≈ 87.5 g (≈ 134.7 g) |
| Power supply | 24 VAC 50 / 60 Hz, 24 VDC |
| AT8N- | AC: ≤ 4.5 VA DC: ≤ 2 W |
| AT11DN- | AC: ≤ 4 VA DC: ≤ 1.5 W |
| AT11EN- | AC: ≤ 4.5 VA DC: ≤ 2 W |
| Insulation resistive | ≥ 100 MΩ (500 VDC megger) |
| Dielectric strength | Between the charging part and the case : 3,000 VAC at 50 / 60 Hz for 1 min |
| Noise immunity | ± 500 V square-wave noise by noise simulator (pulse width 1 ㎲) |
| Vibration | 0.75 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 1 hour |
| Vibration (malfunction) | 0.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 10 min |
| Shock | 300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
| Shock (malfunction) | 100 m/s2 (≈ 30 G) In each X, Y, Z direction for 3 times |
| Relay life cycle | Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VAC 5 A resistive load) |
| Ambient temperature | -10 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation) |
| Sold separately | 8-pin controller socket: PG-08, PS-08(N); 11-pin controller socket: PG-11, PS-11(N) |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics AT11DN
Autonics AT11DN W 48 × H 48 mm Analog Timer AT11DN
Autonics AT11DN W 48 × H 48 mm analog timer (ATN Series): Relay output, 12 VDC supply, input INHIBIT, START, RESET. Order code note: 100-240VAC/24-240VDC.
-
Enquire about Autonics AT11DN-1
Autonics AT11DN-1 W 48 × H 48 mm Analog Timer AT11DN-1
Autonics AT11DN-1 W 48 × H 48 mm analog timer (ATN Series): Relay output, 12 VDC supply, input INHIBIT, START, RESET. Order code note: 12VDC.
-
Enquire about Autonics AT8N
Autonics AT8N W 48 × H 48 mm Analog Timer AT8N
Autonics AT8N W 48 × H 48 mm analog timer (ATN Series): Relay output, 100 - 240 VAC 50 / 60 Hz, 24 - 240 VDC supply. Order code note: 100-240VAC/24-240VDC.
-
Enquire about Autonics AT8N-1
Autonics AT8N-1 W 48 × H 48 mm Analog Timer AT8N-1
Autonics AT8N-1 W 48 × H 48 mm analog timer (ATN Series): Relay output, 100 - 240 VAC 50 / 60 Hz, 24 - 240 VDC supply. Order code note: 12VDC.