Autonics AT8PSN W 48 × H 48 mm Power OFF Delay Analog Timer AT8PSN
Autonics AT8PSN W 48 × H 48 mm power OFF delay analog timer (AT8PSN / AT8PMN Series): Relay output, 200 - 240 VAC 50 / 60 Hz supply. Order code note: 200-240VAC(NEW).
Price and availability on request
Key features
- Time setting range (AT8PSN: 0.05 to 10 sec, AT8PMN: 0.05 to 10 min)
- Simple time setup and direct read of time range
- Power supply: 100 - 120 VAC 50 / 60 Hz / 200 - 240 VAC 50 / 60 Hz / 100/110 VDC / 24 VAC 50 / 60 Hz, 24 VDC
- Application: Protect circuit when momentary power failure and start it again
Specifications
| Series | AT8PSN / AT8PMN Series |
|---|---|
| Order code description | 200-240VAC(NEW) |
| Catalogue model group | AT8P□ |
| Function | Power OFF Delay |
|---|---|
| Time operation | Power OFF Start |
| Control output | Relay |
| Contact type | Time limit DPDT (2c) |
| Contact capacity | 250 VAC 3 A, 30 VDC 3 A resistive load |
| Error | Repeat: ≤ ± 0.2% ± 10 ms SET: ≤ ± 5% ± 50 ms Voltage: ≤ ± 0.5% Temp.: ≤ ± 2% |
| Unit weight | ≈ 100 g |
| Power supply | 200 - 240 VAC 50 / 60 Hz |
| Permissible voltage range | 90 to 110 % of rated voltage |
| Power consumption | AC: ≤ 1.5 VA |
| Insulation resistive | ≥ 100 MΩ (500 VDC megger) |
| Dielectric strength | Between the charging part and the case: 3,000 VAC at 50 / 60 Hz for 1 min |
| Noise immunity | ± 2 kV square-wave noise by noise simulator (pulse width 1 ㎲) |
| Vibration | 0.75 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 1 hour |
| Vibration (malfunction) | 0.5 mm double amplitude at frequency of 10 to 55 Hz in each X, Y, Z direction for 10 min |
| Shock | 300 m/s2 (≈ 30 G) in each X, Y, Z direction for 3 times |
| Shock (malfunction) | 100 m/s2 (≈ 10 G) In each X, Y, Z direction for 3 times |
| Relay life cycle | Mechanical: ≥ 10,000,000 operations Electrical: ≥ 100,000 operations (250 VAC 3 A resistive load) |
| Ambient temperature | -10 to 55 ℃, storage: -25 to 65 ℃ (no freezing or condensation) |
| Ambient humidity | 35 to 85%RH, storage: 35 to 85%RH (no freezing or condensation) |
| Sold separately | 8-pin controller socket: PG-08, PS-08(N) |
|---|
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Autonics AT11DN
Autonics AT11DN W 48 × H 48 mm Analog Timer AT11DN
Autonics AT11DN W 48 × H 48 mm analog timer (ATN Series): Relay output, 12 VDC supply, input INHIBIT, START, RESET. Order code note: 100-240VAC/24-240VDC.
-
Enquire about Autonics AT11DN-1
Autonics AT11DN-1 W 48 × H 48 mm Analog Timer AT11DN-1
Autonics AT11DN-1 W 48 × H 48 mm analog timer (ATN Series): Relay output, 12 VDC supply, input INHIBIT, START, RESET. Order code note: 12VDC.
-
Enquire about Autonics AT11EN
Autonics AT11EN W 48 × H 48 mm Analog Timer AT11EN
Autonics AT11EN W 48 × H 48 mm analog timer (ATN Series): Relay output, 24 VAC 50 / 60 Hz, 24 VDC supply, input INHIBIT, START, RESET. Order code note: 100-240VAC/24-240VDC.
-
Enquire about Autonics AT8N
Autonics AT8N W 48 × H 48 mm Analog Timer AT8N
Autonics AT8N W 48 × H 48 mm analog timer (ATN Series): Relay output, 100 - 240 VAC 50 / 60 Hz, 24 - 240 VDC supply. Order code note: 100-240VAC/24-240VDC.
