Adi-Artech RFS-200 Radial Force Sensor
- Brand
- Adi-Artech
- Model number
- RFS-200
- Category
- Force & Tension Sensors
Adi-Artech strain gauge radial force sensor, 0.30 to 250 Kgf for tension and compression, in nickel-plated tool steel, IP65 sealed. For ideal for industrial radial force sensing, in built over load / under load construction, calibration in mv/v/ω.
Price and availability on request
Key features
- Ideal for industrial Radial Force Sensing
- Paper Foil Film Magnetic Tape Plastic Tape Thin Metal Web Textile / Non- Wovens
- Complete Environmental Protection – Meets IP 65 class
- Electro less nickel-plated tool steel constructions
- Wide range of capacities from 10 KGF to 200 KGF
- In built over load / under load Construction
- Standardized output 1.5 mV/V offered
- Calibration in mV/V/Ω
- Coating Printing Embossing Slitting Laminating Winder / Unwinder Web Converter
Specifications
| Applications | Ideal for industrial Radial Force Sensing, Paper Foil Film Magnetic Tape Plastic Tape Thin Metal Web Textile / Non- Wovens, Complete Environmental Protection – Meets IP 65 class, Electro less nickel-plated tool steel constructions, Wide range of capacities from 10 KGF to 200 KGF, In built over load / under load Construction, Standardized output 1.5 mV/V offered, Calibration in mV/V/Ω, Coating Printing Embossing Slitting Laminating Winder / Unwinder Web Converter |
|---|
| Capacity range | 0.30 to 250 Kgf |
|---|---|
| Load direction | Tension & Compression – Universal |
| Standard capacities | 10, 20, 50, 75, 100, 150, 200 |
| Non-Linearity | < ±0.05 % FSO |
|---|---|
| Non-Repeatability | < ±0.05 % FSO |
| Combine Error | < ±0.05 % FSO |
| Creep (30 minutes) | < ±0.03 % FSO |
| Zero Balance | ±1.0% FSO |
| Output | 1.5 mV/V |
|---|---|
| Excitation Voltage | Maximum 15 VDC (Suggested 5VDc / 10VDc) |
| Input Resistance | 375 Ω (Ohms) |
| Output Resistance | 350 Ω (Ohms) |
| Insulation Resistance | (100 VDC) > 1000 Mega Ω (Ohms) |
| Safe Overload of Rated Capacity | 150% |
|---|---|
| Ultimate Overload of Rated Capacity | 250% |
| Allowable Side Load | 50% |
| Deflection | < 0.5 mm at FSO |
| Finish Product | Electro less nickel-plated tool steel |
| Cable Length(4 Core Screened) | 5 Pin Connector Gland with 8 Meter Cable |
| IP rating | IP65 (as per IS/IEC 60529:2001) |
| Operating Temperature | 0°C to 60°C (Optional 90°C, 120°C, 150°C) |
|---|---|
| Compensated Temperature | 10°C to 50°C (Optional 90°C, 120°C, 150°C) |
| Temperature Effect on Output | < 0.04 % FSO/ °C |
| Temperature Effect Zero | < 0.04 % FSO/ °C |
| Loading Direction | Towards Dot Mentioned on Cover (Downward Towards Connector) |
Specifications are from the manufacturer's published information. Confirm critical values with us or the datasheet before ordering.
Related products
-
Enquire about Adi-Artech 20410
Adi-Artech 20410 Crane Load Cell
Adi-Artech strain gauge crane load cell, 3 Tf to 300 Tf for tension loads, in nickel-plated tool steel, IP65 sealed. For force measurement tension dynamometer, hanging & crane scale, cargo handling in ship yards.
-
Enquire about Adi-Artech 20510
Adi-Artech 20510 Crane Load Cell
Adi-Artech strain gauge crane load cell, 0-1 to 0-30 Tf for tension loads, in nickel-plated tool steel, IP65 sealed. For force measurement tension dynamometer, hanging & crane scale, material handling equipments.
-
Enquire about Adi-Artech 20610-F
Adi-Artech 20610-F Tension Link Load Cell
Adi-Artech strain gauge tension link load cell, 1, 2, 5, 7.5, 10, 15, 20, 30, 40, 50, 75, 100, 150, 200, 300, 450 TF for tension loads, in nickel-plated tool steel, IP65 sealed.
-
Enquire about Adi-Artech 30510
Adi-Artech 30510 Rope Tension Load Cell
Adi-Artech strain gauge rope tension load cell, 0-1 to 0-30 Tf for tension loads, in nickel-plated tool steel, IP65 sealed. For elevator load monitor, vehicle pull test, ship bollard pull test.
