Test & Measuring Instruments
Portable and bench instruments for electricians, maintenance teams, test labs and quality departments: from multimeters and clamp meters to insulation, earth, power quality and environmental testers.
All products in Test & Measuring Instruments
-
Enquire about Lutron PMS-714
Lutron PMS-714 Pen Type Soil Moisture Meter
Pen type soil moisture meter reading 0 to 50 % with 0.1 % resolution, with built-in pins and data hold.
-
Enquire about Kusam Meco KM 8045
Kusam Meco KM 8045 4½-Digit True RMS Bench Multimeter
Manual-ranging 4½-digit (20,000-count) true RMS bench multimeter with 20 A fused current, capacitance, frequency to 20 MHz and transistor hFE; mains powered.
-
Enquire about Lutron PMS-716
Lutron PMS-716 Soil Moisture and Temperature Tester, Pen Type
Two-in-one pen tester for soil moisture (0 to 50 %) and soil temperature (0 to 50 °C), with data hold.
-
Enquire about Kusam Meco KM 8100A
Kusam Meco KM 8100A Multifunction TRMS Power Meter with 12 Displays
Large 280 × 183 mm TRMS power meter showing 12 parameters at once (3 V, 3 A, W, VAr, Wh, VArh, PF, Hz), class 0.2 for V, A, W, RS-485 Modbus.
-
Enquire about Lutron PO2-250
Lutron PO2-250 Pen Type Oxygen (O2) Meter with Low Oxygen Alarm
Pen type meter for oxygen in air (0 to 30.0 %) and temperature with a galvanic sensor; the buzzer sounds below 18.0 % O2.
-
Enquire about Kusam Meco KM 8100C
Kusam Meco KM 8100C Multifunction TRMS Power Meter with 12 Displays and Harmonics Analysis
Large 280 × 183 mm TRMS power meter showing 12 parameters at once (3 V, 3 A, W, VAr, Wh, VArh, PF, Hz), class 0.2 for V, A, W, RS-485 Modbus; harmonics analysed to the 31st, displayed to the 15th.
-
Enquire about Lutron PPF-6066
Lutron PPF-6066 Power Factor Panel Controller / Monitor
DIN 96 x 48 mm power factor meter for 0.10 to 1.00 PF with direct 600 V / 10 A inputs or external CT and PT, with control and alarm relays.
-
Enquire about Kusam Meco KM 8102
Kusam Meco KM 8102 Multifunctional Temperature and Humidity Meter
Temperature, humidity, dew point and wet bulb meter with NTC sensor, −20 – 60 °C ±0.5 °C and 0 – 100% RH ±2.0% RH, dual backlit display, 99-group memory.
-
Enquire about Lutron PPH-2108
Lutron PPH-2108 pH Controller / Monitor
Panel pH controller and monitor for 0 to 14 pH with 0.01 pH resolution and temperature, with control and alarm relays and push-button calibration.
-
Enquire about Kusam Meco KM 8122
Kusam Meco KM 8122 Multifunctional Temperature and Humidity Meter with PC Interface
Temperature, humidity, dew point and wet bulb meter, −20 – 60 °C ±0.5 °C and 0 – 100% RH ±2.0% RH, 99-group memory, 32,000-reading logging and USB interface.
-
Enquire about Lutron PPS-9312
Lutron PPS-9312 Pressure Controller / Monitor
Panel pressure controller for 2 to 400 bar sensors with many units, a large red LED display and control and alarm relays.
-
Enquire about Kusam Meco KM 8911A
Kusam Meco KM 8911A Digital Lux Meter with Data Logging and PC Interface
Auto-ranging lux meter to 400,000 lux (40 kFC), CIE photopic response with cosine correction, ±3%, 10 µs peak capture, 16,000-record logging and USB.
-
Enquire about Lutron PS-9302
Lutron PS-9302 Pressure Meter for 2 to 400 bar Sensors
Pressure meter that works with interchangeable 2 to 400 bar sensors without recalibration, with 8 pressure units and max/min.
-
Enquire about Kusam Meco KM 9122
Kusam Meco KM 9122 Temperature and Humidity Data Logger with PDF Report
Compact USB temperature and humidity logger, −30 – 70 °C ±0.5 °C and 0 – 100% RH ±2.2% RH, 16,000 readings, interval 1 s – 24 h, PDF report without software, LED alarms.
-
Enquire about Lutron PS-9303SD
Lutron PS-9303SD Pressure Meter for 2 to 400 bar Sensors, SD Logger
Pressure meter for 2 to 400 bar sensors with 100 mV full scale output, 8 pressure units, zero button and SD card logging.
-
Enquire about Kusam Meco KM 9999A+
Kusam Meco KM 9999A+ 1000 A AC/DC True RMS Clamp Meter with Inrush
1000 A AC / DC true RMS clamp meter with 42 mm jaw and inrush current for DCA and ACA, Auto-V LoZ, VFD, NCV and temperature; reads to 3000 A with the optional iFlex probe; CAT III 1000 V / CAT IV 600 V.
-
Enquire about Lutron PS93DV-xxBAR
Lutron PS93DV-xxBAR Pressure Transducer, 0 to 100 mV Output
Four-wire pressure transducer with a 0 to 100 mV DC output, in versions from 2 to 400 bar, with a 1/4" NPT or PS port.
-
Enquire about Kusam Meco M3500A
Kusam Meco M3500A 6½-Digit Bench Digital Multimeter
6½-digit bench true RMS multimeter: 0.0035% DC accuracy, 2000 readings per second, VFD dual display, 11 functions and 8 maths functions, thermocouple and RTD inputs, optional 10-channel scanner.
-
Enquire about Lutron PS93MA-xxBAR
Lutron PS93MA-xxBAR Pressure Transducer, 4 to 20 mA Output
Four-wire pressure transducer with a 4 to 20 mA output for PLCs and indicators, in versions from 2 to 400 bar, with a 1/4" NPT or PS port.
-
Enquire about Kusam Meco M3510A
Kusam Meco M3510A 6½-Digit Bench Digital Multimeter
6½-digit bench true RMS multimeter: < 0.012% DC accuracy, 50K readings per second, 10 A current, capacitance to 10,000 µF, Kelvin and 4-wire options, rack-mount capable.
-
Enquire about Lutron PS100-xxBAR
Lutron PS100-xxBAR Pressure Sensor, 2 to 400 bar, for PS-9302 and PS-9303SD
Pressure transducer for the PS-9302 and PS-9303SD pressure meters, in versions from 2 to 400 bar, with 150% overload capacity and a 1/4" NPT port.
-
Enquire about Kusam Meco M3511A
Kusam Meco M3511A 6½-Digit Bench Digital Multimeter
6½-digit bench true RMS multimeter: < 0.012% DC accuracy, 10K readings per second, 10 A current, capacitance to 10,000 µF, rack-mount capable.
-
Enquire about Lutron PSA-311
Lutron PSA-311 Pen Type Salt Meter, IP67
All-in-one pen salt meter for 0 to 12 % salt by weight with 0.01 % resolution, ATC, carbon rod electrode and IP67 protection.
-
Enquire about Kusam Meco PC7K
Kusam Meco PC7K High Voltage Phasing Stick with Analog Meter, 6.6 kV
Self-powered high voltage phasing stick for 6.6 kV systems: analog meter with colour-coded % / V AC scale, neon indicator above 1200 V AC, phase-to-phase and phase-to-earth tests; no battery needed.
